Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20334): Process ended prematurely: osmo-stp_10.42.42.5(pid=20334) [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20334)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:03:56.699605 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:03:56.711099 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:03:56.879511 tst cs_paging_gprs_active.py: using LAC 35631 19:03:57.006772 tst cs_paging_gprs_active.py: using RAC 186 19:03:57.136494 tst cs_paging_gprs_active.py: using CellId 35631 19:03:57.271196 tst cs_paging_gprs_active.py: using BVCI 35632 19:03:57.296206 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:03:57.307594 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:03:57.318938 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:03:57.330245 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:03:57.341752 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:03:57.353301 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:03:57.364892 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:03:57.376477 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:03:57.388178 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:03:57.507006 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:03:57.788472 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:03:57.916317 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:03:58.233403 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20324): Launched 19:03:58.495771 run iperf3-srv_10.42.42.10(pid=20325): Launched 19:03:58.682981 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:03:58.810350 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:03:59.135889 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20326): Launched 19:03:59.419107 run iperf3-srv_10.42.42.10(pid=20327): Launched 19:03:59.621926 tst cs_paging_gprs_active.py:38: start network... 19:03:59.760367 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:04:00.286296 run create_hlr_db(pid=20328): Launched 19:04:00.462792 bus /gobi_6: Setting Powered False 19:04:01.499380 run create_hlr_db(pid=20328): Terminated: ok {rc=0} 19:04:01.953835 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20330): Launched 19:04:02.287570 run osmo-hlr_10.42.42.2(pid=20331): Launched 19:04:02.409751 run osmo-stp_10.42.42.5: Starting osmo-stp 19:04:02.982302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20333): Launched 19:04:03.311293 run osmo-stp_10.42.42.5(pid=20334): Launched 19:04:03.430914 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:04:04.003763 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20336): Launched 19:04:04.121209 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:04:04.406802 run patchelf(pid=20337): Launched 19:04:04.598572 run osmo-stp_10.42.42.5(pid=20334): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20334)] 19:04:04.739224 run osmo-stp_10.42.42.5(pid=20334): stdout: | (launched: 2022-12-13_19:04:03.149530) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:04:04.880311 run osmo-stp_10.42.42.5(pid=20334): stderr: | �[0;m�[38;5;43m20221213190403337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213190403337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213190403337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213190403338 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213190403338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213190403338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213190403338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:04:05.015972 run osmo-stp_10.42.42.5(pid=20334): stdout: | (launched: 2022-12-13_19:04:03.149530) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:04:05.150566 run osmo-stp_10.42.42.5(pid=20334): stderr: | �[0;m�[38;5;43m20221213190403337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213190403337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213190403337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213190403338 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213190403338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213190403338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213190403338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:04:05.307245 run patchelf(pid=20337): Terminating (SIGINT) 19:04:05.491193 run patchelf(pid=20337): Terminated: ok {rc=0} 19:04:05.525020 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20334): Process ended prematurely: osmo-stp_10.42.42.5(pid=20334) [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20334)] [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:04:05.535000 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 19:04:05.599427 run osmo-hlr_10.42.42.2(pid=20331): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20331)] 19:04:05.651422 run osmo-hlr_10.42.42.2(pid=20331): stdout: | (launched: 2022-12-13_19:04:02.124804) 19:04:05.703828 run osmo-hlr_10.42.42.2(pid=20331): stderr: | �[0;m�[1;31m20221213190402318 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213190402318 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213190402318 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213190402318 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213190402318 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213190402318 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213190402331 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213190402341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213190402341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213190402341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:04:05.749050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20324): Terminating (SIGTERM) 19:04:05.791407 run iperf3-srv_10.42.42.10(pid=20325): Terminating (SIGTERM) 19:04:05.834255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20326): Terminating (SIGTERM) 19:04:05.876645 run iperf3-srv_10.42.42.10(pid=20327): Terminating (SIGTERM) 19:04:05.919074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20330): Terminating (SIGTERM) 19:04:05.961546 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20333): Terminating (SIGTERM) 19:04:06.003916 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20336): Terminating (SIGTERM) 19:04:06.013671 --- ParallelTerminationStrategy: PID 20324 died... 19:04:06.070598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20324): Terminated: ok {rc=0} 19:04:06.080664 --- ParallelTerminationStrategy: PID 20325 died... 19:04:06.137006 run iperf3-srv_10.42.42.10(pid=20325): Terminated {rc=256} 19:04:06.146987 --- ParallelTerminationStrategy: PID 20326 died... 19:04:06.203183 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20326): Terminated: ok {rc=0} 19:04:06.213255 --- ParallelTerminationStrategy: PID 20327 died... 19:04:06.269525 run iperf3-srv_10.42.42.10(pid=20327): Terminated {rc=256} 19:04:06.279559 --- ParallelTerminationStrategy: PID 20330 died... 19:04:06.335917 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20330): Terminated: ok {rc=0} 19:04:06.345918 --- ParallelTerminationStrategy: PID 20333 died... 19:04:06.402145 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20333): Terminated: ok {rc=0} 19:04:06.412187 --- ParallelTerminationStrategy: PID 20336 died... 19:04:06.468694 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20336): Terminated: ok {rc=0} 19:04:06.556531 bus /gobi_0: Setting Powered False 19:04:07.663922 bus /gobi_0: Setting Powered False 19:04:08.772766 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20334): Process ended prematurely: osmo-stp_10.42.42.5(pid=20334) [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20334)]