Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=21875): Process ended prematurely: osmo-stp_10.42.42.5(pid=21875) [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21875)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 19:22:09.050870 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:09.062954 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:22:09.211650 tst cs_paging_gprs_active.py: using LAC 35727 19:22:09.339846 tst cs_paging_gprs_active.py: using RAC 27 19:22:09.467520 tst cs_paging_gprs_active.py: using CellId 35727 19:22:09.589798 tst cs_paging_gprs_active.py: using BVCI 35728 19:22:09.613176 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:09.624602 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:09.635845 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:09.647104 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:09.658568 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:09.669982 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:09.681389 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:09.692496 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:09.703999 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:22:09.825353 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:22:10.121587 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:22:10.258249 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:22:10.595073 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21865): Launched 19:22:10.874668 run iperf3-srv_10.42.42.10(pid=21866): Launched 19:22:11.075000 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:22:11.211292 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:22:11.548428 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21867): Launched 19:22:11.828334 run iperf3-srv_10.42.42.10(pid=21868): Launched 19:22:12.028280 tst cs_paging_gprs_active.py:38: start network... 19:22:12.164456 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:22:12.678233 run create_hlr_db(pid=21869): Launched 19:22:12.866924 bus /gobi_6: Setting Powered False 19:22:13.888269 run create_hlr_db(pid=21869): Terminated: ok {rc=0} 19:22:14.296839 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21871): Launched 19:22:14.602863 run osmo-hlr_10.42.42.2(pid=21872): Launched 19:22:14.717087 run osmo-stp_10.42.42.5: Starting osmo-stp 19:22:15.243358 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21874): Launched 19:22:15.547614 run osmo-stp_10.42.42.5(pid=21875): Launched 19:22:15.658148 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:22:16.203295 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21877): Launched 19:22:16.314585 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:22:16.603356 run patchelf(pid=21878): Launched 19:22:16.786057 run osmo-stp_10.42.42.5(pid=21875): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21875)] 19:22:16.919550 run osmo-stp_10.42.42.5(pid=21875): stdout: | (launched: 2022-12-13_19:22:15.398357) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:22:17.053577 run osmo-stp_10.42.42.5(pid=21875): stderr: | �[0;m�[38;5;43m20221213192215566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192215566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192215566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192215566 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192215567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192215567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192215567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:22:17.182009 run osmo-stp_10.42.42.5(pid=21875): stdout: | (launched: 2022-12-13_19:22:15.398357) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:22:17.307099 run osmo-stp_10.42.42.5(pid=21875): stderr: | �[0;m�[38;5;43m20221213192215566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192215566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192215566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192215566 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192215567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192215567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192215567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:22:17.453132 run patchelf(pid=21878): Terminating (SIGINT) 19:22:17.623214 run patchelf(pid=21878): Terminated: ok {rc=0} 19:22:17.654488 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21875): Process ended prematurely: osmo-stp_10.42.42.5(pid=21875) [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21875)] [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 19:22:17.663841 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 19:22:17.723931 run osmo-hlr_10.42.42.2(pid=21872): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21872)] 19:22:17.773089 run osmo-hlr_10.42.42.2(pid=21872): stdout: | (launched: 2022-12-13_19:22:14.452003) 19:22:17.823050 run osmo-hlr_10.42.42.2(pid=21872): stderr: | �[0;m�[1;31m20221213192214625 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213192214625 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213192214625 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213192214625 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213192214625 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213192214625 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213192214641 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213192214650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213192214650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213192214650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:22:17.865595 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21865): Terminating (SIGTERM) 19:22:17.905607 run iperf3-srv_10.42.42.10(pid=21866): Terminating (SIGTERM) 19:22:17.945535 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21867): Terminating (SIGTERM) 19:22:17.985324 run iperf3-srv_10.42.42.10(pid=21868): Terminating (SIGTERM) 19:22:18.025277 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21871): Terminating (SIGTERM) 19:22:18.065112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21874): Terminating (SIGTERM) 19:22:18.105305 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21877): Terminating (SIGTERM) 19:22:18.114507 --- ParallelTerminationStrategy: PID 21865 died... 19:22:18.168508 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21865): Terminated: ok {rc=0} 19:22:18.178256 --- ParallelTerminationStrategy: PID 21866 died... 19:22:18.231427 run iperf3-srv_10.42.42.10(pid=21866): Terminated {rc=256} 19:22:18.241003 --- ParallelTerminationStrategy: PID 21867 died... 19:22:18.293923 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21867): Terminated: ok {rc=0} 19:22:18.303519 --- ParallelTerminationStrategy: PID 21868 died... 19:22:18.356268 run iperf3-srv_10.42.42.10(pid=21868): Terminated {rc=256} 19:22:18.365942 --- ParallelTerminationStrategy: PID 21871 died... 19:22:18.418936 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21871): Terminated: ok {rc=0} 19:22:18.428536 --- ParallelTerminationStrategy: PID 21874 died... 19:22:18.481704 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21874): Terminated: ok {rc=0} 19:22:18.491403 --- ParallelTerminationStrategy: PID 21877 died... 19:22:18.544408 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21877): Terminated: ok {rc=0} 19:22:18.632506 bus /gobi_0: Setting Powered False 19:22:19.735889 bus /gobi_0: Setting Powered False 19:22:20.846560 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21875): Process ended prematurely: osmo-stp_10.42.42.5(pid=21875) [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21875)]