Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29718): Process ended prematurely: osmo-stp_10.42.42.5(pid=29718) [trial-2394↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29718)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:46:51.383699 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:46:51.394598 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:46:51.538083 tst cs_paging_gprs_active.py: using LAC 36173 20:46:51.670820 tst cs_paging_gprs_active.py: using RAC 218 20:46:51.798359 tst cs_paging_gprs_active.py: using CellId 36173 20:46:51.926744 tst cs_paging_gprs_active.py: using BVCI 36174 20:46:51.952160 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:46:51.963625 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:46:51.974859 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:46:51.986144 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:46:51.997233 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:46:52.008302 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:46:52.019610 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:46:52.030714 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:46:52.042120 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:46:52.162758 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:46:52.462072 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:46:52.599425 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:46:52.939233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29708): Launched 20:46:53.223322 run iperf3-srv_10.42.42.10(pid=29709): Launched 20:46:53.425262 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:46:53.562662 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:46:53.902867 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29710): Launched 20:46:54.186803 run iperf3-srv_10.42.42.10(pid=29711): Launched 20:46:54.388345 tst cs_paging_gprs_active.py:38: start network... 20:46:54.525743 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:46:55.054852 run create_hlr_db(pid=29712): Launched 20:46:55.244400 bus /gobi_6: Setting Powered False 20:46:56.266445 run create_hlr_db(pid=29712): Terminated: ok {rc=0} 20:46:56.679211 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29714): Launched 20:46:56.987037 run osmo-hlr_10.42.42.2(pid=29715): Launched 20:46:57.107161 run osmo-stp_10.42.42.5: Starting osmo-stp 20:46:57.645601 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29717): Launched 20:46:57.951592 run osmo-stp_10.42.42.5(pid=29718): Launched 20:46:58.062862 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:46:58.596173 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29720): Launched 20:46:58.705142 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:46:58.971071 run patchelf(pid=29721): Launched 20:46:59.150403 run osmo-stp_10.42.42.5(pid=29718): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29718)] 20:46:59.281470 run osmo-stp_10.42.42.5(pid=29718): stdout: | (launched: 2022-12-13_20:46:57.801367) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:46:59.412810 run osmo-stp_10.42.42.5(pid=29718): stderr: | �[0;m�[38;5;43m20221213204657970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213204657970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213204657970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213204657971 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213204657971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213204657971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213204657971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:46:59.540010 run osmo-stp_10.42.42.5(pid=29718): stdout: | (launched: 2022-12-13_20:46:57.801367) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:46:59.666448 run osmo-stp_10.42.42.5(pid=29718): stderr: | �[0;m�[38;5;43m20221213204657970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213204657970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213204657970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213204657971 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213204657971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213204657971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213204657971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:46:59.813999 run patchelf(pid=29721): Terminating (SIGINT) 20:46:59.987571 run patchelf(pid=29721): Terminated: ok {rc=0} 20:47:00.019277 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29718): Process ended prematurely: osmo-stp_10.42.42.5(pid=29718) [trial-2394↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29718)] [trial-2394↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:47:00.028397 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:47:00.089128 run osmo-hlr_10.42.42.2(pid=29715): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29715)] 20:47:00.138846 run osmo-hlr_10.42.42.2(pid=29715): stdout: | (launched: 2022-12-13_20:46:56.835518) 20:47:00.189055 run osmo-hlr_10.42.42.2(pid=29715): stderr: | �[0;m�[1;31m20221213204657009 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213204657009 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213204657009 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213204657010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213204657010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213204657010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213204657025 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213204657036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213204657036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213204657036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:47:00.231636 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29708): Terminating (SIGTERM) 20:47:00.271725 run iperf3-srv_10.42.42.10(pid=29709): Terminating (SIGTERM) 20:47:00.311912 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29710): Terminating (SIGTERM) 20:47:00.351927 run iperf3-srv_10.42.42.10(pid=29711): Terminating (SIGTERM) 20:47:00.392037 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29714): Terminating (SIGTERM) 20:47:00.432300 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29717): Terminating (SIGTERM) 20:47:00.472521 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29720): Terminating (SIGTERM) 20:47:00.481881 --- ParallelTerminationStrategy: PID 29708 died... 20:47:00.536035 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29708): Terminated: ok {rc=0} 20:47:00.545750 --- ParallelTerminationStrategy: PID 29709 died... 20:47:00.599663 run iperf3-srv_10.42.42.10(pid=29709): Terminated {rc=256} 20:47:00.609330 --- ParallelTerminationStrategy: PID 29710 died... 20:47:00.663067 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29710): Terminated: ok {rc=0} 20:47:00.672620 --- ParallelTerminationStrategy: PID 29711 died... 20:47:00.726177 run iperf3-srv_10.42.42.10(pid=29711): Terminated {rc=256} 20:47:00.735771 --- ParallelTerminationStrategy: PID 29714 died... 20:47:00.789771 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29714): Terminated: ok {rc=0} 20:47:00.799429 --- ParallelTerminationStrategy: PID 29717 died... 20:47:00.854591 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29717): Terminated: ok {rc=0} 20:47:00.865769 --- ParallelTerminationStrategy: PID 29720 died... 20:47:00.934905 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29720): Terminated: ok {rc=0} 20:47:01.021257 bus /gobi_0: Setting Powered False 20:47:02.152595 bus /gobi_0: Setting Powered False 20:47:03.266794 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29718): Process ended prematurely: osmo-stp_10.42.42.5(pid=29718) [trial-2394↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29718)]