Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4584): Process ended prematurely: osmo-stp_10.42.42.5(pid=4584) [trial-2399↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4584)]
Standard Output
---------------------------------------------- trial-2399 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 03:41:43.239238 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:43.250397 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:41:43.381478 tst cs_paging_gprs_active.py: using LAC 38299 03:41:43.500231 tst cs_paging_gprs_active.py: using RAC 49 03:41:43.620734 tst cs_paging_gprs_active.py: using CellId 38299 03:41:43.741061 tst cs_paging_gprs_active.py: using BVCI 38300 03:41:43.764590 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:43.775386 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:43.785991 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:43.796353 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:43.806762 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:43.817274 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:43.827888 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:43.838305 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:43.848841 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:41:43.970658 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:41:44.253138 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:41:44.380789 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:41:44.700416 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4574): Launched 03:41:44.966878 run iperf3-srv_10.42.42.10(pid=4575): Launched 03:41:45.162515 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:41:45.302625 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:41:45.647007 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4576): Launched 03:41:45.958564 run iperf3-srv_10.42.42.10(pid=4577): Launched 03:41:46.201500 tst cs_paging_gprs_active.py:38: start network... 03:41:46.350195 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:41:46.894482 run create_hlr_db(pid=4578): Launched 03:41:47.075814 bus /gobi_6: Setting Powered False 03:41:48.105057 run create_hlr_db(pid=4578): Terminated: ok {rc=0} 03:41:48.545728 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4580): Launched 03:41:48.875989 run osmo-hlr_10.42.42.2(pid=4581): Launched 03:41:48.998484 run osmo-stp_10.42.42.5: Starting osmo-stp 03:41:49.572836 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4583): Launched 03:41:49.903654 run osmo-stp_10.42.42.5(pid=4584): Launched 03:41:50.023125 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:41:50.600042 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4586): Launched 03:41:50.717643 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:41:51.006460 run patchelf(pid=4587): Launched 03:41:51.199517 run osmo-stp_10.42.42.5(pid=4584): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4584)] 03:41:51.341425 run osmo-stp_10.42.42.5(pid=4584): stdout: | (launched: 2022-12-14_03:41:49.740185) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:41:51.483175 run osmo-stp_10.42.42.5(pid=4584): stderr: | �[0;m�[38;5;43m20221214034149938 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214034149938 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214034149938 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214034149938 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214034149939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214034149939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214034149939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:41:51.620085 run osmo-stp_10.42.42.5(pid=4584): stdout: | (launched: 2022-12-14_03:41:49.740185) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:41:51.755446 run osmo-stp_10.42.42.5(pid=4584): stderr: | �[0;m�[38;5;43m20221214034149938 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214034149938 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214034149938 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214034149938 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214034149939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214034149939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214034149939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:41:51.912627 run patchelf(pid=4587): Terminating (SIGINT) 03:41:52.097483 run patchelf(pid=4587): Terminated: ok {rc=0} 03:41:52.131282 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4584): Process ended prematurely: osmo-stp_10.42.42.5(pid=4584) [trial-2399↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4584)] [trial-2399↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 03:41:52.141278 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 03:41:52.205357 run osmo-hlr_10.42.42.2(pid=4581): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4581)] 03:41:52.257592 run osmo-hlr_10.42.42.2(pid=4581): stdout: | (launched: 2022-12-14_03:41:48.713207) 03:41:52.310436 run osmo-hlr_10.42.42.2(pid=4581): stderr: | �[0;m�[1;31m20221214034148915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214034148915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214034148915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214034148915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214034148915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214034148915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214034148927 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214034148935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214034148935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214034148935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:41:52.355734 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4574): Terminating (SIGTERM) 03:41:52.398246 run iperf3-srv_10.42.42.10(pid=4575): Terminating (SIGTERM) 03:41:52.440777 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4576): Terminating (SIGTERM) 03:41:52.483258 run iperf3-srv_10.42.42.10(pid=4577): Terminating (SIGTERM) 03:41:52.525959 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4580): Terminating (SIGTERM) 03:41:52.568464 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4583): Terminating (SIGTERM) 03:41:52.611080 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4586): Terminating (SIGTERM) 03:41:52.620862 --- ParallelTerminationStrategy: PID 4574 died... 03:41:52.678356 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4574): Terminated: ok {rc=0} 03:41:52.688568 --- ParallelTerminationStrategy: PID 4575 died... 03:41:52.745173 run iperf3-srv_10.42.42.10(pid=4575): Terminated {rc=256} 03:41:52.755310 --- ParallelTerminationStrategy: PID 4576 died... 03:41:52.811990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4576): Terminated: ok {rc=0} 03:41:52.822210 --- ParallelTerminationStrategy: PID 4577 died... 03:41:52.878915 run iperf3-srv_10.42.42.10(pid=4577): Terminated {rc=256} 03:41:52.889145 --- ParallelTerminationStrategy: PID 4580 died... 03:41:52.945546 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4580): Terminated: ok {rc=0} 03:41:52.955756 --- ParallelTerminationStrategy: PID 4583 died... 03:41:53.012205 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4583): Terminated: ok {rc=0} 03:41:53.022328 --- ParallelTerminationStrategy: PID 4586 died... 03:41:53.079022 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4586): Terminated: ok {rc=0} 03:41:53.166960 bus /gobi_0: Setting Powered False 03:41:54.270787 bus /gobi_0: Setting Powered False 03:41:55.383141 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4584): Process ended prematurely: osmo-stp_10.42.42.5(pid=4584) [trial-2399↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4584)]