Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8935): Process ended prematurely: osmo-stp_10.42.42.5(pid=8935) [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8935)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 10:36:12.831361 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:36:12.842598 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 10:36:12.981574 tst cs_paging_gprs_active.py: using LAC 40337 10:36:13.105226 tst cs_paging_gprs_active.py: using RAC 47 10:36:13.224335 tst cs_paging_gprs_active.py: using CellId 40337 10:36:13.343353 tst cs_paging_gprs_active.py: using BVCI 40338 10:36:13.366508 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:36:13.377671 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:36:13.388655 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:36:13.399712 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:36:13.411086 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:36:13.422450 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:36:13.433880 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:36:13.445170 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:36:13.456781 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:36:13.578968 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:36:13.858835 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:36:13.985313 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:36:14.301692 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8925): Launched 10:36:14.564769 run iperf3-srv_10.42.42.10(pid=8926): Launched 10:36:14.750113 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:36:14.876445 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:36:15.193435 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8927): Launched 10:36:15.456471 run iperf3-srv_10.42.42.10(pid=8928): Launched 10:36:15.640916 tst cs_paging_gprs_active.py:38: start network... 10:36:15.767013 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:36:16.291098 run create_hlr_db(pid=8929): Launched 10:36:16.470796 bus /gobi_6: Setting Powered False 10:36:17.490945 run create_hlr_db(pid=8929): Terminated: ok {rc=0} 10:36:17.920028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8931): Launched 10:36:18.226428 run osmo-hlr_10.42.42.2(pid=8932): Launched 10:36:18.340825 run osmo-stp_10.42.42.5: Starting osmo-stp 10:36:18.869087 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8934): Launched 10:36:19.173787 run osmo-stp_10.42.42.5(pid=8935): Launched 10:36:19.284176 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:36:19.814452 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8937): Launched 10:36:19.922417 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:36:20.189204 run patchelf(pid=8938): Launched 10:36:20.368145 run osmo-stp_10.42.42.5(pid=8935): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8935)] 10:36:20.499025 run osmo-stp_10.42.42.5(pid=8935): stdout: | (launched: 2022-12-14_10:36:19.023062) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:36:20.630121 run osmo-stp_10.42.42.5(pid=8935): stderr: | �[0;m�[38;5;43m20221214103619193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214103619193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214103619194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214103619194 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214103619194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214103619194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214103619195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:36:20.755894 run osmo-stp_10.42.42.5(pid=8935): stdout: | (launched: 2022-12-14_10:36:19.023062) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:36:20.880325 run osmo-stp_10.42.42.5(pid=8935): stderr: | �[0;m�[38;5;43m20221214103619193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214103619193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214103619194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214103619194 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214103619194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214103619194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214103619195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:36:21.026454 run patchelf(pid=8938): Terminating (SIGINT) 10:36:21.198000 run patchelf(pid=8938): Terminated: ok {rc=0} 10:36:21.229741 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8935): Process ended prematurely: osmo-stp_10.42.42.5(pid=8935) [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8935)] [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 10:36:21.239434 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 10:36:21.299999 run osmo-hlr_10.42.42.2(pid=8932): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8932)] 10:36:21.349513 run osmo-hlr_10.42.42.2(pid=8932): stdout: | (launched: 2022-12-14_10:36:18.075196) 10:36:21.399770 run osmo-hlr_10.42.42.2(pid=8932): stderr: | �[0;m�[1;31m20221214103618252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214103618252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214103618252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214103618252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214103618252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214103618252 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214103618267 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214103618277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214103618277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214103618277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:36:21.442737 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8925): Terminating (SIGTERM) 10:36:21.483261 run iperf3-srv_10.42.42.10(pid=8926): Terminating (SIGTERM) 10:36:21.523962 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8927): Terminating (SIGTERM) 10:36:21.564298 run iperf3-srv_10.42.42.10(pid=8928): Terminating (SIGTERM) 10:36:21.604778 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8931): Terminating (SIGTERM) 10:36:21.645252 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8934): Terminating (SIGTERM) 10:36:21.685876 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8937): Terminating (SIGTERM) 10:36:21.695060 --- ParallelTerminationStrategy: PID 8925 died... 10:36:21.749499 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8925): Terminated: ok {rc=0} 10:36:21.759166 --- ParallelTerminationStrategy: PID 8926 died... 10:36:21.812930 run iperf3-srv_10.42.42.10(pid=8926): Terminated {rc=256} 10:36:21.822407 --- ParallelTerminationStrategy: PID 8927 died... 10:36:21.876230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8927): Terminated: ok {rc=0} 10:36:21.885894 --- ParallelTerminationStrategy: PID 8928 died... 10:36:21.939646 run iperf3-srv_10.42.42.10(pid=8928): Terminated {rc=256} 10:36:21.949350 --- ParallelTerminationStrategy: PID 8931 died... 10:36:22.003081 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8931): Terminated: ok {rc=0} 10:36:22.012676 --- ParallelTerminationStrategy: PID 8934 died... 10:36:22.066456 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8934): Terminated: ok {rc=0} 10:36:22.076078 --- ParallelTerminationStrategy: PID 8937 died... 10:36:22.129531 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8937): Terminated: ok {rc=0} 10:36:22.213600 bus /gobi_0: Setting Powered False 10:36:23.321446 bus /gobi_0: Setting Powered False 10:36:24.433212 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8935): Process ended prematurely: osmo-stp_10.42.42.5(pid=8935) [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8935)]