Failed
dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=20628): Process ended prematurely: osmo-stp_10.42.42.5(pid=20628) [trial-2404↪dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20628)]
Standard Output
---------------------------------------------- trial-2404 dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 12:18:26.001852 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 12:18:26.013462 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 12:18:26.168285 tst switch_tch_pdch.py: using LAC 40845 12:18:26.290793 tst switch_tch_pdch.py: using RAC 45 12:18:26.424233 tst switch_tch_pdch.py: using CellId 40845 12:18:26.560165 tst switch_tch_pdch.py: using BVCI 40846 12:18:26.584881 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 12:18:26.596655 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 12:18:26.608100 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 12:18:26.619608 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 12:18:26.631110 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 12:18:26.642660 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 12:18:26.654308 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 12:18:26.665883 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 12:18:26.783231 tst dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 12:18:27.085488 tst switch_tch_pdch.py:51: start network... 12:18:27.220070 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:18:27.735667 run create_hlr_db(pid=20622): Launched 12:18:27.922726 bus /gobi_6: Setting Powered False 12:18:28.942291 run create_hlr_db(pid=20622): Terminated: ok {rc=0} 12:18:29.374025 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20624): Launched 12:18:29.697924 run osmo-hlr_10.42.42.2(pid=20625): Launched 12:18:29.815898 run osmo-stp_10.42.42.5: Starting osmo-stp 12:18:30.376712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20627): Launched 12:18:30.699288 run osmo-stp_10.42.42.5(pid=20628): Launched 12:18:30.816815 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:18:31.427864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20630): Launched 12:18:31.544041 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:18:31.844438 run patchelf(pid=20631): Launched 12:18:32.026256 run osmo-stp_10.42.42.5(pid=20628): ERR: Terminated: ERROR {rc=1} [trial-2404↪dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20628)] 12:18:32.162161 run osmo-stp_10.42.42.5(pid=20628): stdout: | (launched: 2022-12-14_12:18:30.539614) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:18:32.295483 run osmo-stp_10.42.42.5(pid=20628): stderr: | �[0;m�[38;5;43m20221214121830734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214121830734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214121830734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214121830734 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214121830735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214121830735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214121830735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:18:32.428653 run osmo-stp_10.42.42.5(pid=20628): stdout: | (launched: 2022-12-14_12:18:30.539614) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:18:32.560039 run osmo-stp_10.42.42.5(pid=20628): stderr: | �[0;m�[38;5;43m20221214121830734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214121830734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214121830734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214121830734 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214121830735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214121830735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214121830735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:18:32.713554 run patchelf(pid=20631): Terminating (SIGINT) 12:18:32.893912 run patchelf(pid=20631): Terminated: ok {rc=0} 12:18:32.927289 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=20628): Process ended prematurely: osmo-stp_10.42.42.5(pid=20628) [trial-2404↪dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20628)] [trial-2404↪dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 12:18:32.936642 tst switch_tch_pdch.py:54: Test FAILED (6.9 sec) 12:18:33.000345 run osmo-hlr_10.42.42.2(pid=20625): ERR: Terminated: ERROR {rc=237} [trial-2404↪dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20625)] 12:18:33.051810 run osmo-hlr_10.42.42.2(pid=20625): stdout: | (launched: 2022-12-14_12:18:29.537758) 12:18:33.103966 run osmo-hlr_10.42.42.2(pid=20625): stderr: | �[0;m�[1;31m20221214121829738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214121829738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214121829738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214121829738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214121829739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214121829739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214121829751 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214121829759 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214121829759 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214121829759 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:18:33.148483 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20624): Terminating (SIGTERM) 12:18:33.191112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20627): Terminating (SIGTERM) 12:18:33.233268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20630): Terminating (SIGTERM) 12:18:33.243022 --- ParallelTerminationStrategy: PID 20624 died... 12:18:33.299192 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20624): Terminated: ok {rc=0} 12:18:33.309340 --- ParallelTerminationStrategy: PID 20627 died... 12:18:33.365293 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20627): Terminated: ok {rc=0} 12:18:33.375574 --- ParallelTerminationStrategy: PID 20630 died... 12:18:33.431574 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20630): Terminated: ok {rc=0} 12:18:33.518641 bus /gobi_0: Setting Powered False 12:18:34.626351 bus /gobi_0: Setting Powered False 12:18:35.734167 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20628): Process ended prematurely: osmo-stp_10.42.42.5(pid=20628) [trial-2404↪dynts:trx-lms+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20628)]