Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1351): Process ended prematurely: osmo-stp_10.42.42.5(pid=1351) [trial-2387↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1351)]
Standard Output
---------------------------------------------- trial-2387 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 09:44:41.821819 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:44:41.834220 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 09:44:41.988905 tst ping_idle_ping.py: using LAC 33115 09:44:42.105148 tst ping_idle_ping.py: using RAC 220 09:44:42.222022 tst ping_idle_ping.py: using CellId 33115 09:44:42.337786 tst ping_idle_ping.py: using BVCI 33116 09:44:42.360653 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:44:42.371791 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:44:42.382675 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:44:42.393544 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:44:42.404512 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:44:42.415569 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:44:42.426726 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:44:42.437972 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:44:42.726788 tst ping_idle_ping.py:24: start network... 09:44:42.859452 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:44:43.370350 run create_hlr_db(pid=1345): Launched 09:44:43.554210 bus /gobi_6: Setting Powered False 09:44:44.574984 run create_hlr_db(pid=1345): Terminated: ok {rc=0} 09:44:44.995162 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1347): Launched 09:44:45.311268 run osmo-hlr_10.42.42.2(pid=1348): Launched 09:44:45.428553 run osmo-stp_10.42.42.5: Starting osmo-stp 09:44:46.002691 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1350): Launched 09:44:46.340282 run osmo-stp_10.42.42.5(pid=1351): Launched 09:44:46.580094 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:44:47.158087 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1353): Launched 09:44:47.273265 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:44:47.547674 run patchelf(pid=1354): Launched 09:44:47.731988 run osmo-stp_10.42.42.5(pid=1351): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1351)] 09:44:47.866671 run osmo-stp_10.42.42.5(pid=1351): stdout: | (launched: 2022-12-13_09:44:46.167056) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:44:48.001596 run osmo-stp_10.42.42.5(pid=1351): stderr: | �[0;m�[38;5;43m20221213094446473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213094446473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213094446473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213094446474 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213094446474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213094446474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213094446474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:44:48.132104 run osmo-stp_10.42.42.5(pid=1351): stdout: | (launched: 2022-12-13_09:44:46.167056) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:44:48.261919 run osmo-stp_10.42.42.5(pid=1351): stderr: | �[0;m�[38;5;43m20221213094446473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213094446473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213094446473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213094446474 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213094446474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213094446474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213094446474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:44:48.412640 run patchelf(pid=1354): Terminating (SIGINT) 09:44:48.589644 run patchelf(pid=1354): Terminated: ok {rc=0} 09:44:48.621512 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=1351): Process ended prematurely: osmo-stp_10.42.42.5(pid=1351) [trial-2387↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1351)] [trial-2387↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 09:44:48.630790 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 09:44:48.692560 run osmo-hlr_10.42.42.2(pid=1348): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1348)] 09:44:48.743021 run osmo-hlr_10.42.42.2(pid=1348): stdout: | (launched: 2022-12-13_09:44:45.155669) 09:44:48.794111 run osmo-hlr_10.42.42.2(pid=1348): stderr: | �[0;m�[1;31m20221213094445352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213094445352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213094445352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213094445352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213094445352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213094445352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213094445365 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213094445373 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213094445373 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213094445373 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:44:48.837568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1347): Terminating (SIGTERM) 09:44:48.878858 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1350): Terminating (SIGTERM) 09:44:48.919932 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1353): Terminating (SIGTERM) 09:44:48.929654 --- ParallelTerminationStrategy: PID 1347 died... 09:44:48.984412 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1347): Terminated: ok {rc=0} 09:44:48.994452 --- ParallelTerminationStrategy: PID 1350 died... 09:44:49.049119 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1350): Terminated: ok {rc=0} 09:44:49.059059 --- ParallelTerminationStrategy: PID 1353 died... 09:44:49.113947 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1353): Terminated: ok {rc=0} 09:44:49.198728 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1351): Process ended prematurely: osmo-stp_10.42.42.5(pid=1351) [trial-2387↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1351)]