Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28916): Process ended prematurely: osmo-stp_10.42.42.5(pid=28916) [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28916)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:56:10.433051 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:10.443897 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:56:10.587601 tst cs_paging_gprs_active.py: using LAC 32855 08:56:10.712658 tst cs_paging_gprs_active.py: using RAC 215 08:56:10.839334 tst cs_paging_gprs_active.py: using CellId 32855 08:56:10.965818 tst cs_paging_gprs_active.py: using BVCI 32856 08:56:10.990111 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:11.001344 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:11.012186 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:11.023177 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:11.034176 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:11.045139 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:11.056245 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:11.067178 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:11.078545 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:56:11.196361 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:56:11.474450 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:56:11.598896 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:56:11.906662 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28906): Launched 08:56:12.161961 run iperf3-srv_10.42.42.10(pid=28907): Launched 08:56:12.342902 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:56:12.467301 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:56:12.774737 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28908): Launched 08:56:13.029876 run iperf3-srv_10.42.42.10(pid=28909): Launched 08:56:13.211236 tst cs_paging_gprs_active.py:38: start network... 08:56:13.336343 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:56:13.803905 run create_hlr_db(pid=28910): Launched 08:56:13.974787 bus /gobi_6: Setting Powered False 08:56:14.997302 run create_hlr_db(pid=28910): Terminated: ok {rc=0} 08:56:15.418751 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28912): Launched 08:56:15.736519 run osmo-hlr_10.42.42.2(pid=28913): Launched 08:56:15.853971 run osmo-stp_10.42.42.5: Starting osmo-stp 08:56:16.427619 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28915): Launched 08:56:16.809796 run osmo-stp_10.42.42.5(pid=28916): Launched 08:56:16.985268 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:56:17.613325 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28918): Launched 08:56:17.727045 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:56:18.002893 run patchelf(pid=28919): Launched 08:56:18.189224 run osmo-stp_10.42.42.5(pid=28916): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28916)] 08:56:18.325562 run osmo-stp_10.42.42.5(pid=28916): stdout: | (launched: 2022-12-13_08:56:16.593251) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:56:18.461877 run osmo-stp_10.42.42.5(pid=28916): stderr: | �[0;m�[38;5;43m20221213085616960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085616960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085616960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085616966 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085616967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085616967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085616967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:56:18.593679 run osmo-stp_10.42.42.5(pid=28916): stdout: | (launched: 2022-12-13_08:56:16.593251) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:56:18.724373 run osmo-stp_10.42.42.5(pid=28916): stderr: | �[0;m�[38;5;43m20221213085616960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085616960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085616960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085616966 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085616967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085616967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085616967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:56:18.877821 run patchelf(pid=28919): Terminating (SIGINT) 08:56:19.057022 run patchelf(pid=28919): Terminated: ok {rc=0} 08:56:19.090102 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28916): Process ended prematurely: osmo-stp_10.42.42.5(pid=28916) [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28916)] [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:56:19.099888 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:56:19.161997 run osmo-hlr_10.42.42.2(pid=28913): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28913)] 08:56:19.212981 run osmo-hlr_10.42.42.2(pid=28913): stdout: | (launched: 2022-12-13_08:56:15.581091) 08:56:19.264391 run osmo-hlr_10.42.42.2(pid=28913): stderr: | �[0;m�[1;31m20221213085615780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213085615780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213085615780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213085615780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213085615780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213085615780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213085615793 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213085615802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213085615803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213085615803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:56:19.308293 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28906): Terminating (SIGTERM) 08:56:19.349867 run iperf3-srv_10.42.42.10(pid=28907): Terminating (SIGTERM) 08:56:19.391174 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28908): Terminating (SIGTERM) 08:56:19.432237 run iperf3-srv_10.42.42.10(pid=28909): Terminating (SIGTERM) 08:56:19.473625 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28912): Terminating (SIGTERM) 08:56:19.515089 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28915): Terminating (SIGTERM) 08:56:19.556431 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28918): Terminating (SIGTERM) 08:56:19.566003 --- ParallelTerminationStrategy: PID 28906 died... 08:56:19.621055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28906): Terminated: ok {rc=0} 08:56:19.630834 --- ParallelTerminationStrategy: PID 28907 died... 08:56:19.685276 run iperf3-srv_10.42.42.10(pid=28907): Terminated {rc=256} 08:56:19.695049 --- ParallelTerminationStrategy: PID 28908 died... 08:56:19.749952 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28908): Terminated: ok {rc=0} 08:56:19.759775 --- ParallelTerminationStrategy: PID 28909 died... 08:56:19.814592 run iperf3-srv_10.42.42.10(pid=28909): Terminated {rc=256} 08:56:19.824473 --- ParallelTerminationStrategy: PID 28912 died... 08:56:19.879612 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28912): Terminated: ok {rc=0} 08:56:19.889644 --- ParallelTerminationStrategy: PID 28915 died... 08:56:19.944717 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28915): Terminated: ok {rc=0} 08:56:19.954704 --- ParallelTerminationStrategy: PID 28918 died... 08:56:20.009981 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28918): Terminated: ok {rc=0} 08:56:20.096561 bus /gobi_0: Setting Powered False 08:56:21.202259 bus /gobi_0: Setting Powered False 08:56:22.310859 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28916): Process ended prematurely: osmo-stp_10.42.42.5(pid=28916) [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28916)]