Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=30404): Process ended prematurely: osmo-stp_10.42.42.5(pid=30404) [trial-2387↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30404)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:13:07.026533 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:13:07.037438 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:13:07.171712 tst cs_paging_gprs_active.py: using LAC 32946 09:13:07.287790 tst cs_paging_gprs_active.py: using RAC 51 09:13:07.404468 tst cs_paging_gprs_active.py: using CellId 32946 09:13:07.522225 tst cs_paging_gprs_active.py: using BVCI 32947 09:13:07.545252 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:13:07.556301 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:13:07.567181 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:13:07.578090 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:13:07.589327 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:13:07.600614 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:13:07.612028 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:13:07.623457 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:13:07.635030 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:13:07.753384 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:13:08.031378 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:13:08.157342 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:13:08.466288 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30394): Launched 09:13:08.722572 run iperf3-srv_10.42.42.10(pid=30395): Launched 09:13:08.904841 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:13:09.029723 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:13:09.339767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30396): Launched 09:13:09.596766 run iperf3-srv_10.42.42.10(pid=30397): Launched 09:13:09.779049 tst cs_paging_gprs_active.py:38: start network... 09:13:09.904182 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:13:10.374106 run create_hlr_db(pid=30398): Launched 09:13:10.546098 bus /gobi_6: Setting Powered False 09:13:11.569239 run create_hlr_db(pid=30398): Terminated: ok {rc=0} 09:13:11.992878 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30400): Launched 09:13:12.313861 run osmo-hlr_10.42.42.2(pid=30401): Launched 09:13:12.431905 run osmo-stp_10.42.42.5: Starting osmo-stp 09:13:12.986800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30403): Launched 09:13:13.308659 run osmo-stp_10.42.42.5(pid=30404): Launched 09:13:13.426555 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:13:13.981946 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30406): Launched 09:13:14.096243 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:13:14.374260 run patchelf(pid=30407): Launched 09:13:14.561245 run osmo-stp_10.42.42.5(pid=30404): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30404)] 09:13:14.698180 run osmo-stp_10.42.42.5(pid=30404): stdout: | (launched: 2022-12-13_09:13:13.150181) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:13:14.835003 run osmo-stp_10.42.42.5(pid=30404): stderr: | �[0;m�[38;5;43m20221213091313343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213091313343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213091313343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213091313343 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213091313344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213091313344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213091313344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:13:14.967177 run osmo-stp_10.42.42.5(pid=30404): stdout: | (launched: 2022-12-13_09:13:13.150181) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:13:15.098394 run osmo-stp_10.42.42.5(pid=30404): stderr: | �[0;m�[38;5;43m20221213091313343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213091313343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213091313343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213091313343 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213091313344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213091313344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213091313344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:13:15.251362 run patchelf(pid=30407): Terminating (SIGINT) 09:13:15.431886 run patchelf(pid=30407): Terminated: ok {rc=0} 09:13:15.464722 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30404): Process ended prematurely: osmo-stp_10.42.42.5(pid=30404) [trial-2387↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30404)] [trial-2387↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:13:15.474522 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 09:13:15.536499 run osmo-hlr_10.42.42.2(pid=30401): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30401)] 09:13:15.587295 run osmo-hlr_10.42.42.2(pid=30401): stdout: | (launched: 2022-12-13_09:13:12.156211) 09:13:15.638590 run osmo-hlr_10.42.42.2(pid=30401): stderr: | �[0;m�[1;31m20221213091312355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213091312355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213091312355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213091312355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213091312355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213091312355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213091312367 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213091312377 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213091312378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213091312378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:13:15.682297 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30394): Terminating (SIGTERM) 09:13:15.723546 run iperf3-srv_10.42.42.10(pid=30395): Terminating (SIGTERM) 09:13:15.764880 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30396): Terminating (SIGTERM) 09:13:15.806228 run iperf3-srv_10.42.42.10(pid=30397): Terminating (SIGTERM) 09:13:15.857427 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30400): Terminating (SIGTERM) 09:13:15.909329 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30403): Terminating (SIGTERM) 09:13:15.951349 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30406): Terminating (SIGTERM) 09:13:15.960926 --- ParallelTerminationStrategy: PID 30394 died... 09:13:16.016916 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30394): Terminated: ok {rc=0} 09:13:16.027407 --- ParallelTerminationStrategy: PID 30395 died... 09:13:16.088916 run iperf3-srv_10.42.42.10(pid=30395): Terminated {rc=256} 09:13:16.099836 --- ParallelTerminationStrategy: PID 30396 died... 09:13:16.154909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30396): Terminated: ok {rc=0} 09:13:16.165119 --- ParallelTerminationStrategy: PID 30397 died... 09:13:16.220857 run iperf3-srv_10.42.42.10(pid=30397): Terminated {rc=256} 09:13:16.231256 --- ParallelTerminationStrategy: PID 30400 died... 09:13:16.288751 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30400): Terminated: ok {rc=0} 09:13:16.299060 --- ParallelTerminationStrategy: PID 30403 died... 09:13:16.355538 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30403): Terminated: ok {rc=0} 09:13:16.365864 --- ParallelTerminationStrategy: PID 30406 died... 09:13:16.421676 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30406): Terminated: ok {rc=0} 09:13:16.507727 bus /gobi_0: Setting Powered False 09:13:17.608680 bus /gobi_0: Setting Powered False 09:13:18.718146 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30404): Process ended prematurely: osmo-stp_10.42.42.5(pid=30404) [trial-2387↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30404)]