Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=15721): Process ended prematurely: osmo-stp_10.42.42.5(pid=15721) [trial-2389↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15721)]
Standard Output
---------------------------------------------- trial-2389 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 11:49:47.445063 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:49:47.456379 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:49:47.609332 tst cs_paging_gprs_active.py: using LAC 33741 11:49:47.739392 tst cs_paging_gprs_active.py: using RAC 81 11:49:47.867423 tst cs_paging_gprs_active.py: using CellId 33741 11:49:47.996047 tst cs_paging_gprs_active.py: using BVCI 33742 11:49:48.021552 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:49:48.032847 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:49:48.044012 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:49:48.055267 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:49:48.066655 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:49:48.078248 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:49:48.089872 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:49:48.101255 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:49:48.112729 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:49:48.234464 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:49:48.521427 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:49:48.650943 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:49:48.974856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15711): Launched 11:49:49.246486 run iperf3-srv_10.42.42.10(pid=15712): Launched 11:49:49.436201 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:49:49.565918 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:49:49.891170 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15713): Launched 11:49:50.160473 run iperf3-srv_10.42.42.10(pid=15714): Launched 11:49:50.349539 tst cs_paging_gprs_active.py:38: start network... 11:49:50.478479 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:49:50.979174 run create_hlr_db(pid=15715): Launched 11:49:51.158948 bus /gobi_6: Setting Powered False 11:49:52.179266 run create_hlr_db(pid=15715): Terminated: ok {rc=0} 11:49:52.622376 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15717): Launched 11:49:52.958802 run osmo-hlr_10.42.42.2(pid=15718): Launched 11:49:53.081161 run osmo-stp_10.42.42.5: Starting osmo-stp 11:49:53.659700 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15720): Launched 11:49:53.993869 run osmo-stp_10.42.42.5(pid=15721): Launched 11:49:54.114797 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:49:54.695624 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15723): Launched 11:49:54.813820 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:49:55.104475 run patchelf(pid=15724): Launched 11:49:55.298040 run osmo-stp_10.42.42.5(pid=15721): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15721)] 11:49:55.440046 run osmo-stp_10.42.42.5(pid=15721): stdout: | (launched: 2022-12-13_11:49:53.828127) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:49:55.582629 run osmo-stp_10.42.42.5(pid=15721): stderr: | �[0;m�[38;5;43m20221213114954024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114954024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114954024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114954025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114954025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114954025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114954025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:49:55.719380 run osmo-stp_10.42.42.5(pid=15721): stdout: | (launched: 2022-12-13_11:49:53.828127) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:49:55.854732 run osmo-stp_10.42.42.5(pid=15721): stderr: | �[0;m�[38;5;43m20221213114954024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114954024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114954024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114954025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114954025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114954025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114954025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:49:56.013646 run patchelf(pid=15724): Terminating (SIGINT) 11:49:56.199212 run patchelf(pid=15724): Terminated: ok {rc=0} 11:49:56.233303 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15721): Process ended prematurely: osmo-stp_10.42.42.5(pid=15721) [trial-2389↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15721)] [trial-2389↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 11:49:56.243346 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 11:49:56.307069 run osmo-hlr_10.42.42.2(pid=15718): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15718)] 11:49:56.359087 run osmo-hlr_10.42.42.2(pid=15718): stdout: | (launched: 2022-12-13_11:49:52.791637) 11:49:56.411525 run osmo-hlr_10.42.42.2(pid=15718): stderr: | �[0;m�[1;31m20221213114952995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213114952995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213114952995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213114952995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213114952995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213114952995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213114953008 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213114953017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213114953017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213114953017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:49:56.456339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15711): Terminating (SIGTERM) 11:49:56.499082 run iperf3-srv_10.42.42.10(pid=15712): Terminating (SIGTERM) 11:49:56.541833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15713): Terminating (SIGTERM) 11:49:56.584016 run iperf3-srv_10.42.42.10(pid=15714): Terminating (SIGTERM) 11:49:56.626234 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15717): Terminating (SIGTERM) 11:49:56.668277 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15720): Terminating (SIGTERM) 11:49:56.710521 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15723): Terminating (SIGTERM) 11:49:56.720121 --- ParallelTerminationStrategy: PID 15711 died... 11:49:56.776593 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15711): Terminated: ok {rc=0} 11:49:56.786576 --- ParallelTerminationStrategy: PID 15712 died... 11:49:56.842746 run iperf3-srv_10.42.42.10(pid=15712): Terminated {rc=256} 11:49:56.852620 --- ParallelTerminationStrategy: PID 15713 died... 11:49:56.908796 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15713): Terminated: ok {rc=0} 11:49:56.918721 --- ParallelTerminationStrategy: PID 15714 died... 11:49:56.975069 run iperf3-srv_10.42.42.10(pid=15714): Terminated {rc=256} 11:49:56.985045 --- ParallelTerminationStrategy: PID 15717 died... 11:49:57.041269 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15717): Terminated: ok {rc=0} 11:49:57.051210 --- ParallelTerminationStrategy: PID 15720 died... 11:49:57.107485 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15720): Terminated: ok {rc=0} 11:49:57.117928 --- ParallelTerminationStrategy: PID 15723 died... 11:49:57.174262 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15723): Terminated: ok {rc=0} 11:49:57.262339 bus /gobi_0: Setting Powered False 11:49:58.368829 bus /gobi_0: Setting Powered False 11:49:59.481133 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15721): Process ended prematurely: osmo-stp_10.42.42.5(pid=15721) [trial-2389↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15721)]