Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19085): Process ended prematurely: osmo-stp_10.42.42.5(pid=19085) [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19085)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 12:14:49.839575 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:14:49.851153 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 12:14:50.017774 tst cs_paging_gprs_active.py: using LAC 33873 12:14:50.146520 tst cs_paging_gprs_active.py: using RAC 213 12:14:50.274806 tst cs_paging_gprs_active.py: using CellId 33873 12:14:50.406287 tst cs_paging_gprs_active.py: using BVCI 33874 12:14:50.431708 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:14:50.443144 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:14:50.454502 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:14:50.465781 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:14:50.477321 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:14:50.488797 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:14:50.500568 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:14:50.512196 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:14:50.524110 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:14:50.642895 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:14:50.944568 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:14:51.084011 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:14:51.430007 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19075): Launched 12:14:51.717850 run iperf3-srv_10.42.42.10(pid=19076): Launched 12:14:51.922454 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:14:52.061381 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:14:52.407238 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19077): Launched 12:14:52.695123 run iperf3-srv_10.42.42.10(pid=19078): Launched 12:14:52.899275 tst cs_paging_gprs_active.py:38: start network... 12:14:53.038343 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:14:53.562143 run create_hlr_db(pid=19079): Launched 12:14:53.755667 bus /gobi_6: Setting Powered False 12:14:54.776904 run create_hlr_db(pid=19079): Terminated: ok {rc=0} 12:14:55.219842 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19081): Launched 12:14:55.551718 run osmo-hlr_10.42.42.2(pid=19082): Launched 12:14:55.677076 run osmo-stp_10.42.42.5: Starting osmo-stp 12:14:56.255109 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19084): Launched 12:14:56.588807 run osmo-stp_10.42.42.5(pid=19085): Launched 12:14:56.709802 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:14:57.289521 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19087): Launched 12:14:57.408317 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:14:57.707250 run patchelf(pid=19088): Launched 12:14:57.902534 run osmo-stp_10.42.42.5(pid=19085): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19085)] 12:14:58.045308 run osmo-stp_10.42.42.5(pid=19085): stdout: | (launched: 2022-12-13_12:14:56.423678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:14:58.188429 run osmo-stp_10.42.42.5(pid=19085): stderr: | �[0;m�[38;5;43m20221213121456616 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213121456617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213121456617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213121456617 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213121456618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213121456618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213121456618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:14:58.326025 run osmo-stp_10.42.42.5(pid=19085): stdout: | (launched: 2022-12-13_12:14:56.423678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:14:58.462227 run osmo-stp_10.42.42.5(pid=19085): stderr: | �[0;m�[38;5;43m20221213121456616 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213121456617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213121456617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213121456617 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213121456618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213121456618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213121456618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:14:58.620709 run patchelf(pid=19088): Terminating (SIGINT) 12:14:58.807468 run patchelf(pid=19088): Terminated: ok {rc=0} 12:14:58.841761 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19085): Process ended prematurely: osmo-stp_10.42.42.5(pid=19085) [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19085)] [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 12:14:58.851827 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 12:14:58.916129 run osmo-hlr_10.42.42.2(pid=19082): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19082)] 12:14:58.968122 run osmo-hlr_10.42.42.2(pid=19082): stdout: | (launched: 2022-12-13_12:14:55.388693) 12:14:59.020787 run osmo-hlr_10.42.42.2(pid=19082): stderr: | �[0;m�[1;31m20221213121455585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213121455586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213121455586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213121455586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213121455586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213121455586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213121455598 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213121455606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213121455606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213121455606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:14:59.065967 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19075): Terminating (SIGTERM) 12:14:59.108379 run iperf3-srv_10.42.42.10(pid=19076): Terminating (SIGTERM) 12:14:59.150950 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19077): Terminating (SIGTERM) 12:14:59.193323 run iperf3-srv_10.42.42.10(pid=19078): Terminating (SIGTERM) 12:14:59.235752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19081): Terminating (SIGTERM) 12:14:59.278269 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19084): Terminating (SIGTERM) 12:14:59.320923 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19087): Terminating (SIGTERM) 12:14:59.330821 --- ParallelTerminationStrategy: PID 19075 died... 12:14:59.387550 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19075): Terminated: ok {rc=0} 12:14:59.397795 --- ParallelTerminationStrategy: PID 19076 died... 12:14:59.454225 run iperf3-srv_10.42.42.10(pid=19076): Terminated {rc=256} 12:14:59.464366 --- ParallelTerminationStrategy: PID 19077 died... 12:14:59.520837 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19077): Terminated: ok {rc=0} 12:14:59.531006 --- ParallelTerminationStrategy: PID 19078 died... 12:14:59.587493 run iperf3-srv_10.42.42.10(pid=19078): Terminated {rc=256} 12:14:59.598019 --- ParallelTerminationStrategy: PID 19081 died... 12:14:59.654677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19081): Terminated: ok {rc=0} 12:14:59.664855 --- ParallelTerminationStrategy: PID 19084 died... 12:14:59.721865 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19084): Terminated: ok {rc=0} 12:14:59.732010 --- ParallelTerminationStrategy: PID 19087 died... 12:14:59.788594 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19087): Terminated: ok {rc=0} 12:14:59.876777 bus /gobi_0: Setting Powered False 12:15:01.002098 bus /gobi_0: Setting Powered False 12:15:02.122552 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19085): Process ended prematurely: osmo-stp_10.42.42.5(pid=19085) [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19085)]