Failed
dynts:sysmo+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_sysmo+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=15249): Process ended prematurely: osmo-stp_10.42.42.5(pid=15249) [trial-2389↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15249)]
Standard Output
---------------------------------------------- trial-2389 dynts:sysmo+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 11:43:02.909292 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 11:43:02.920855 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 11:43:03.075663 tst switch_tch_pdch.py: using LAC 33705 11:43:03.205524 tst switch_tch_pdch.py: using RAC 45 11:43:03.335102 tst switch_tch_pdch.py: using CellId 33705 11:43:03.465371 tst switch_tch_pdch.py: using BVCI 33706 11:43:03.490604 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 11:43:03.502267 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 11:43:03.513631 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 11:43:03.525070 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 11:43:03.536725 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 11:43:03.548462 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 11:43:03.560350 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 11:43:03.572164 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 11:43:03.693825 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 11:43:03.992755 tst switch_tch_pdch.py:51: start network... 11:43:04.130436 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:43:04.618648 run create_hlr_db(pid=15243): Launched 11:43:04.753089 bus /gobi_6: Setting Powered False 11:43:05.830237 run create_hlr_db(pid=15243): Terminated: ok {rc=0} 11:43:06.219137 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15245): Launched 11:43:06.531349 run osmo-hlr_10.42.42.2(pid=15246): Launched 11:43:06.645837 run osmo-stp_10.42.42.5: Starting osmo-stp 11:43:07.155696 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15248): Launched 11:43:07.464616 run osmo-stp_10.42.42.5(pid=15249): Launched 11:43:07.577294 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:43:08.092385 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15251): Launched 11:43:08.201513 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:43:08.471069 run patchelf(pid=15252): Launched 11:43:08.650692 run osmo-stp_10.42.42.5(pid=15249): ERR: Terminated: ERROR {rc=1} [trial-2389↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15249)] 11:43:08.782896 run osmo-stp_10.42.42.5(pid=15249): stdout: | (launched: 2022-12-13_11:43:07.311396) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:43:08.914489 run osmo-stp_10.42.42.5(pid=15249): stderr: | �[0;m�[38;5;43m20221213114307485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114307486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114307487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114307487 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114307487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114307487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114307488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:43:09.041147 run osmo-stp_10.42.42.5(pid=15249): stdout: | (launched: 2022-12-13_11:43:07.311396) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:43:09.167364 run osmo-stp_10.42.42.5(pid=15249): stderr: | �[0;m�[38;5;43m20221213114307485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114307486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114307487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114307487 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114307487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114307487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114307488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:43:09.313574 run patchelf(pid=15252): Terminating (SIGINT) 11:43:09.484686 run patchelf(pid=15252): Terminated: ok {rc=0} 11:43:09.515841 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=15249): Process ended prematurely: osmo-stp_10.42.42.5(pid=15249) [trial-2389↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15249)] [trial-2389↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 11:43:09.524693 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 11:43:09.585242 run osmo-hlr_10.42.42.2(pid=15246): ERR: Terminated: ERROR {rc=237} [trial-2389↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15246)] 11:43:09.634752 run osmo-hlr_10.42.42.2(pid=15246): stdout: | (launched: 2022-12-13_11:43:06.375729) 11:43:09.685002 run osmo-hlr_10.42.42.2(pid=15246): stderr: | �[0;m�[1;31m20221213114306555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213114306555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213114306555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213114306555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213114306555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213114306555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213114306567 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/dynts:sysmo+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213114306577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213114306577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213114306578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:43:09.727598 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15245): Terminating (SIGTERM) 11:43:09.767803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15248): Terminating (SIGTERM) 11:43:09.807992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15251): Terminating (SIGTERM) 11:43:09.817498 --- ParallelTerminationStrategy: PID 15245 died... 11:43:09.871665 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15245): Terminated: ok {rc=0} 11:43:09.881506 --- ParallelTerminationStrategy: PID 15248 died... 11:43:09.935117 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15248): Terminated: ok {rc=0} 11:43:09.944834 --- ParallelTerminationStrategy: PID 15251 died... 11:43:09.998559 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15251): Terminated: ok {rc=0} 11:43:10.082659 bus /gobi_0: Setting Powered False 11:43:11.185613 bus /gobi_0: Setting Powered False 11:43:12.298444 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15249): Process ended prematurely: osmo-stp_10.42.42.5(pid=15249) [trial-2389↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15249)]