Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=19568): Process ended prematurely: osmo-stp_10.42.42.5(pid=19568) [trial-2389↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19568)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 12:21:45.157437 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 12:21:45.168087 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 12:21:45.306709 tst cs_paging_gprs_active.py: using LAC 33910 12:21:45.428444 tst cs_paging_gprs_active.py: using RAC 250 12:21:45.550349 tst cs_paging_gprs_active.py: using CellId 33910 12:21:45.669854 tst cs_paging_gprs_active.py: using BVCI 33911 12:21:45.693250 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 12:21:45.703820 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 12:21:45.714288 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 12:21:45.724711 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 12:21:45.735062 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 12:21:45.745892 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 12:21:45.756917 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 12:21:45.767690 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 12:21:45.778591 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 12:21:45.931616 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 12:21:46.221950 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:21:46.354791 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:21:46.695733 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19558): Launched 12:21:47.033814 run iperf3-srv_10.42.42.10(pid=19559): Launched 12:21:47.261060 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:21:47.398401 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:21:47.741462 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19560): Launched 12:21:48.023528 run iperf3-srv_10.42.42.10(pid=19561): Launched 12:21:48.224670 tst cs_paging_gprs_active.py:38: start network... 12:21:48.361781 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:21:48.877760 run create_hlr_db(pid=19562): Launched 12:21:49.068453 bus /sierra_2: Setting Powered False 12:21:50.089515 run create_hlr_db(pid=19562): Terminated: ok {rc=0} 12:21:50.527479 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19564): Launched 12:21:50.856508 run osmo-hlr_10.42.42.2(pid=19565): Launched 12:21:50.977980 run osmo-stp_10.42.42.5: Starting osmo-stp 12:21:51.548082 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19567): Launched 12:21:51.878192 run osmo-stp_10.42.42.5(pid=19568): Launched 12:21:51.998299 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:21:52.570691 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19570): Launched 12:21:52.688100 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:21:52.978097 run patchelf(pid=19571): Launched 12:21:53.171252 run osmo-stp_10.42.42.5(pid=19568): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19568)] 12:21:53.312386 run osmo-stp_10.42.42.5(pid=19568): stdout: | (launched: 2022-12-13_12:21:51.715134) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:21:53.453973 run osmo-stp_10.42.42.5(pid=19568): stderr: | �[0;m�[38;5;43m20221213122151906 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213122151906 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213122151906 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213122151907 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213122151907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213122151907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213122151907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:21:53.590137 run osmo-stp_10.42.42.5(pid=19568): stdout: | (launched: 2022-12-13_12:21:51.715134) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:21:53.725172 run osmo-stp_10.42.42.5(pid=19568): stderr: | �[0;m�[38;5;43m20221213122151906 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213122151906 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213122151906 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213122151907 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213122151907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213122151907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213122151907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:21:53.882499 run patchelf(pid=19571): Terminating (SIGINT) 12:21:54.067114 run patchelf(pid=19571): Terminated: ok {rc=0} 12:21:54.100870 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19568): Process ended prematurely: osmo-stp_10.42.42.5(pid=19568) [trial-2389↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19568)] [trial-2389↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 12:21:54.110993 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 12:21:54.175246 run osmo-hlr_10.42.42.2(pid=19565): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19565)] 12:21:54.227238 run osmo-hlr_10.42.42.2(pid=19565): stdout: | (launched: 2022-12-13_12:21:50.693956) 12:21:54.279869 run osmo-hlr_10.42.42.2(pid=19565): stderr: | �[0;m�[1;31m20221213122150889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213122150889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213122150889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213122150889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213122150889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213122150890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213122150901 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213122150910 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213122150910 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213122150911 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:21:54.325245 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19558): Terminating (SIGTERM) 12:21:54.367929 run iperf3-srv_10.42.42.10(pid=19559): Terminating (SIGTERM) 12:21:54.411004 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19560): Terminating (SIGTERM) 12:21:54.453536 run iperf3-srv_10.42.42.10(pid=19561): Terminating (SIGTERM) 12:21:54.496294 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19564): Terminating (SIGTERM) 12:21:54.538696 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19567): Terminating (SIGTERM) 12:21:54.581142 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19570): Terminating (SIGTERM) 12:21:54.590896 --- ParallelTerminationStrategy: PID 19558 died... 12:21:54.647963 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19558): Terminated: ok {rc=0} 12:21:54.658098 --- ParallelTerminationStrategy: PID 19559 died... 12:21:54.714779 run iperf3-srv_10.42.42.10(pid=19559): Terminated {rc=256} 12:21:54.724802 --- ParallelTerminationStrategy: PID 19560 died... 12:21:54.781388 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19560): Terminated: ok {rc=0} 12:21:54.791427 --- ParallelTerminationStrategy: PID 19561 died... 12:21:54.848093 run iperf3-srv_10.42.42.10(pid=19561): Terminated {rc=256} 12:21:54.858214 --- ParallelTerminationStrategy: PID 19564 died... 12:21:54.914969 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19564): Terminated: ok {rc=0} 12:21:54.925558 --- ParallelTerminationStrategy: PID 19567 died... 12:21:54.982202 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19567): Terminated: ok {rc=0} 12:21:54.992249 --- ParallelTerminationStrategy: PID 19570 died... 12:21:55.048619 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19570): Terminated: ok {rc=0} 12:21:55.137099 bus /gobi_0: Setting Powered False 12:21:56.242635 bus /gobi_0: Setting Powered False 12:21:57.352767 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19568): Process ended prematurely: osmo-stp_10.42.42.5(pid=19568) [trial-2389↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19568)]