Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11008): Process ended prematurely: osmo-stp_10.42.42.5(pid=11008) [trial-2360↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11008)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:36:31.028849 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:36:31.040736 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:36:31.198478 tst cs_paging_gprs_active.py: using LAC 21820 13:36:31.338520 tst cs_paging_gprs_active.py: using RAC 145 13:36:31.500612 tst cs_paging_gprs_active.py: using CellId 21820 13:36:31.635339 tst cs_paging_gprs_active.py: using BVCI 21821 13:36:31.661349 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:36:31.674357 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:36:31.687753 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:36:31.701199 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:36:31.714827 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:36:31.728824 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:36:31.741194 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:36:31.755310 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:36:31.768720 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:36:31.914434 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:36:32.267423 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:36:32.395021 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:36:32.706533 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10998): Launched 13:36:32.963755 run iperf3-srv_10.42.42.10(pid=10999): Launched 13:36:33.146193 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:36:33.270206 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:36:33.581846 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11000): Launched 13:36:33.839206 run iperf3-srv_10.42.42.10(pid=11001): Launched 13:36:34.022166 tst cs_paging_gprs_active.py:38: start network... 13:36:34.146665 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:36:34.629025 run create_hlr_db(pid=11002): Launched 13:36:34.800743 bus /gobi_6: Setting Powered False 13:36:35.823243 run create_hlr_db(pid=11002): Terminated: ok {rc=0} 13:36:36.250676 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11004): Launched 13:36:36.573400 run osmo-hlr_10.42.42.2(pid=11005): Launched 13:36:36.694385 run osmo-stp_10.42.42.5: Starting osmo-stp 13:36:37.250711 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11007): Launched 13:36:37.572624 run osmo-stp_10.42.42.5(pid=11008): Launched 13:36:37.689906 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:36:38.251415 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11010): Launched 13:36:38.366464 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:36:38.653567 run patchelf(pid=11011): Launched 13:36:38.841510 run osmo-stp_10.42.42.5(pid=11008): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11008)] 13:36:38.978761 run osmo-stp_10.42.42.5(pid=11008): stdout: | (launched: 2022-12-09_13:36:37.413458) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:36:39.116515 run osmo-stp_10.42.42.5(pid=11008): stderr: | �[0;m�[38;5;43m20221209133637606 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209133637606 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209133637606 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209133637606 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209133637607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209133637607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209133637607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:36:39.249679 run osmo-stp_10.42.42.5(pid=11008): stdout: | (launched: 2022-12-09_13:36:37.413458) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:36:39.381649 run osmo-stp_10.42.42.5(pid=11008): stderr: | �[0;m�[38;5;43m20221209133637606 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209133637606 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209133637606 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209133637606 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209133637607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209133637607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209133637607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:36:39.535414 run patchelf(pid=11011): Terminating (SIGINT) 13:36:39.715001 run patchelf(pid=11011): Terminated: ok {rc=0} 13:36:39.748053 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11008): Process ended prematurely: osmo-stp_10.42.42.5(pid=11008) [trial-2360↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11008)] [trial-2360↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:36:39.757974 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:36:39.821315 run osmo-hlr_10.42.42.2(pid=11005): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11005)] 13:36:39.872470 run osmo-hlr_10.42.42.2(pid=11005): stdout: | (launched: 2022-12-09_13:36:36.414083) 13:36:39.924482 run osmo-hlr_10.42.42.2(pid=11005): stderr: | �[0;m�[1;31m20221209133636612 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209133636612 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209133636612 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209133636612 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209133636612 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209133636612 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209133636628 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209133636638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209133636638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209133636638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:36:39.969715 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10998): Terminating (SIGTERM) 13:36:40.011811 run iperf3-srv_10.42.42.10(pid=10999): Terminating (SIGTERM) 13:36:40.053801 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11000): Terminating (SIGTERM) 13:36:40.095640 run iperf3-srv_10.42.42.10(pid=11001): Terminating (SIGTERM) 13:36:40.137519 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11004): Terminating (SIGTERM) 13:36:40.179209 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11007): Terminating (SIGTERM) 13:36:40.221197 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11010): Terminating (SIGTERM) 13:36:40.231181 --- ParallelTerminationStrategy: PID 10998 died... 13:36:40.287314 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10998): Terminated: ok {rc=0} 13:36:40.297484 --- ParallelTerminationStrategy: PID 10999 died... 13:36:40.353112 run iperf3-srv_10.42.42.10(pid=10999): Terminated {rc=256} 13:36:40.363482 --- ParallelTerminationStrategy: PID 11000 died... 13:36:40.419141 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11000): Terminated: ok {rc=0} 13:36:40.429377 --- ParallelTerminationStrategy: PID 11001 died... 13:36:40.485303 run iperf3-srv_10.42.42.10(pid=11001): Terminated {rc=256} 13:36:40.495569 --- ParallelTerminationStrategy: PID 11004 died... 13:36:40.551657 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11004): Terminated: ok {rc=0} 13:36:40.561680 --- ParallelTerminationStrategy: PID 11007 died... 13:36:40.616673 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11007): Terminated: ok {rc=0} 13:36:40.626859 --- ParallelTerminationStrategy: PID 11010 died... 13:36:40.682175 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11010): Terminated: ok {rc=0} 13:36:40.768898 bus /gobi_0: Setting Powered False 13:36:41.875619 bus /gobi_0: Setting Powered False 13:36:42.985927 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11008): Process ended prematurely: osmo-stp_10.42.42.5(pid=11008) [trial-2360↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11008)]