Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=32618): Process ended prematurely: osmo-stp_10.42.42.5(pid=32618) [trial-2370↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32618)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 05:52:06.657146 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:52:06.668532 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 05:52:06.832842 tst cs_paging_gprs_active.py: using LAC 26292 05:52:06.955455 tst cs_paging_gprs_active.py: using RAC 27 05:52:07.075910 tst cs_paging_gprs_active.py: using CellId 26292 05:52:07.198220 tst cs_paging_gprs_active.py: using BVCI 26293 05:52:07.221210 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:52:07.232101 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:52:07.242930 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:52:07.254568 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:52:07.266066 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:52:07.277656 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:52:07.289144 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:52:07.300557 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:52:07.312041 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:52:07.427582 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:52:07.702952 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:52:07.828332 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:52:08.140514 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32608): Launched 05:52:08.398815 run iperf3-srv_10.42.42.10(pid=32609): Launched 05:52:08.581117 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:52:08.704581 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:52:09.015302 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32610): Launched 05:52:09.273460 run iperf3-srv_10.42.42.10(pid=32611): Launched 05:52:09.455186 tst cs_paging_gprs_active.py:38: start network... 05:52:09.579552 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:52:10.056197 run create_hlr_db(pid=32612): Launched 05:52:10.224186 bus /gobi_6: Setting Powered False 05:52:11.245717 run create_hlr_db(pid=32612): Terminated: ok {rc=0} 05:52:11.659454 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32614): Launched 05:52:11.974546 run osmo-hlr_10.42.42.2(pid=32615): Launched 05:52:12.094129 run osmo-stp_10.42.42.5: Starting osmo-stp 05:52:12.641319 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32617): Launched 05:52:12.957650 run osmo-stp_10.42.42.5(pid=32618): Launched 05:52:13.071900 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:52:13.621212 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32620): Launched 05:52:13.733345 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:52:14.009186 run patchelf(pid=32621): Launched 05:52:14.193442 run osmo-stp_10.42.42.5(pid=32618): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32618)] 05:52:14.327724 run osmo-stp_10.42.42.5(pid=32618): stdout: | (launched: 2022-12-10_05:52:12.800452) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:52:14.462606 run osmo-stp_10.42.42.5(pid=32618): stderr: | �[0;m�[38;5;43m20221210055212993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055212993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055212993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055212994 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055212994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055212994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055212994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:52:14.593647 run osmo-stp_10.42.42.5(pid=32618): stdout: | (launched: 2022-12-10_05:52:12.800452) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:52:14.722539 run osmo-stp_10.42.42.5(pid=32618): stderr: | �[0;m�[38;5;43m20221210055212993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055212993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055212993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055212994 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055212994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055212994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055212994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:52:14.872047 run patchelf(pid=32621): Terminating (SIGINT) 05:52:15.048284 run patchelf(pid=32621): Terminated: ok {rc=0} 05:52:15.080863 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32618): Process ended prematurely: osmo-stp_10.42.42.5(pid=32618) [trial-2370↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32618)] [trial-2370↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 05:52:15.090685 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 05:52:15.152239 run osmo-hlr_10.42.42.2(pid=32615): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32615)] 05:52:15.202631 run osmo-hlr_10.42.42.2(pid=32615): stdout: | (launched: 2022-12-10_05:52:11.815934) 05:52:15.253702 run osmo-hlr_10.42.42.2(pid=32615): stderr: | �[0;m�[1;31m20221210055212014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210055212014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210055212014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210055212014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210055212014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210055212014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210055212026 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210055212034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210055212034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210055212034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:52:15.297213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32608): Terminating (SIGTERM) 05:52:15.338310 run iperf3-srv_10.42.42.10(pid=32609): Terminating (SIGTERM) 05:52:15.379259 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32610): Terminating (SIGTERM) 05:52:15.420130 run iperf3-srv_10.42.42.10(pid=32611): Terminating (SIGTERM) 05:52:15.461044 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32614): Terminating (SIGTERM) 05:52:15.501858 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32617): Terminating (SIGTERM) 05:52:15.542731 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32620): Terminating (SIGTERM) 05:52:15.552214 --- ParallelTerminationStrategy: PID 32608 died... 05:52:15.607068 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32608): Terminated: ok {rc=0} 05:52:15.616832 --- ParallelTerminationStrategy: PID 32609 died... 05:52:15.671204 run iperf3-srv_10.42.42.10(pid=32609): Terminated {rc=256} 05:52:15.681094 --- ParallelTerminationStrategy: PID 32610 died... 05:52:15.735716 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32610): Terminated: ok {rc=0} 05:52:15.745721 --- ParallelTerminationStrategy: PID 32611 died... 05:52:15.800470 run iperf3-srv_10.42.42.10(pid=32611): Terminated {rc=256} 05:52:15.810424 --- ParallelTerminationStrategy: PID 32614 died... 05:52:15.868461 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32614): Terminated: ok {rc=0} 05:52:15.878786 --- ParallelTerminationStrategy: PID 32617 died... 05:52:15.934832 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32617): Terminated: ok {rc=0} 05:52:15.945156 --- ParallelTerminationStrategy: PID 32620 died... 05:52:16.000733 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32620): Terminated: ok {rc=0} 05:52:16.100625 bus /gobi_0: Setting Powered False 05:52:17.223036 bus /gobi_0: Setting Powered False 05:52:18.336178 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32618): Process ended prematurely: osmo-stp_10.42.42.5(pid=32618) [trial-2370↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32618)]