Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=24789): Process ended prematurely: osmo-stp_10.42.42.5(pid=24789) [trial-2376↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24789)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 16:32:54.308690 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 16:32:54.319456 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 16:32:54.453754 tst cs_paging_gprs_active.py: using LAC 29228 16:32:54.569313 tst cs_paging_gprs_active.py: using RAC 158 16:32:54.687051 tst cs_paging_gprs_active.py: using CellId 29228 16:32:54.802636 tst cs_paging_gprs_active.py: using BVCI 29229 16:32:54.825458 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 16:32:54.836203 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 16:32:54.846835 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 16:32:54.857696 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 16:32:54.868267 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 16:32:54.878921 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 16:32:54.889835 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 16:32:54.900425 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 16:32:54.911258 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 16:32:55.026460 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 16:32:55.302925 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:32:55.427846 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:32:55.739303 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24779): Launched 16:32:55.996836 run iperf3-srv_10.42.42.10(pid=24780): Launched 16:32:56.179561 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:32:56.303822 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:32:56.615358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24781): Launched 16:32:56.872815 run iperf3-srv_10.42.42.10(pid=24782): Launched 16:32:57.055284 tst cs_paging_gprs_active.py:38: start network... 16:32:57.179473 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:32:57.648327 run create_hlr_db(pid=24783): Launched 16:32:57.819540 bus /sierra_2: Setting Powered False 16:32:58.854625 run create_hlr_db(pid=24783): Terminated: ok {rc=0} 16:32:59.281416 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24785): Launched 16:32:59.601405 run osmo-hlr_10.42.42.2(pid=24786): Launched 16:32:59.719034 run osmo-stp_10.42.42.5: Starting osmo-stp 16:33:00.273755 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24788): Launched 16:33:00.593960 run osmo-stp_10.42.42.5(pid=24789): Launched 16:33:00.709106 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:33:01.299320 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24792): Launched 16:33:01.417396 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:33:01.720049 run patchelf(pid=24793): Launched 16:33:01.911501 run osmo-stp_10.42.42.5(pid=24789): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24789)] 16:33:02.051366 run osmo-stp_10.42.42.5(pid=24789): stdout: | (launched: 2022-12-10_16:33:00.436275) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:33:02.191385 run osmo-stp_10.42.42.5(pid=24789): stderr: | �[0;m�[38;5;43m20221210163300627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210163300627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210163300627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210163300628 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210163300628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210163300628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210163300628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:33:02.324599 run osmo-stp_10.42.42.5(pid=24789): stdout: | (launched: 2022-12-10_16:33:00.436275) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:33:02.455618 run osmo-stp_10.42.42.5(pid=24789): stderr: | �[0;m�[38;5;43m20221210163300627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210163300627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210163300627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210163300628 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210163300628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210163300628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210163300628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:33:02.609157 run patchelf(pid=24793): Terminating (SIGINT) 16:33:02.789877 run patchelf(pid=24793): Terminated: ok {rc=0} 16:33:02.823110 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24789): Process ended prematurely: osmo-stp_10.42.42.5(pid=24789) [trial-2376↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24789)] [trial-2376↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 16:33:02.832901 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 16:33:02.895738 run osmo-hlr_10.42.42.2(pid=24786): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24786)] 16:33:02.946707 run osmo-hlr_10.42.42.2(pid=24786): stdout: | (launched: 2022-12-10_16:32:59.444011) 16:33:02.998341 run osmo-hlr_10.42.42.2(pid=24786): stderr: | �[0;m�[1;31m20221210163259643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210163259643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210163259643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210163259644 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210163259644 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210163259644 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210163259655 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210163259664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210163259664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210163259664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:33:03.042501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24779): Terminating (SIGTERM) 16:33:03.083861 run iperf3-srv_10.42.42.10(pid=24780): Terminating (SIGTERM) 16:33:03.125492 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24781): Terminating (SIGTERM) 16:33:03.166955 run iperf3-srv_10.42.42.10(pid=24782): Terminating (SIGTERM) 16:33:03.208427 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24785): Terminating (SIGTERM) 16:33:03.250297 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24788): Terminating (SIGTERM) 16:33:03.291943 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24792): Terminating (SIGTERM) 16:33:03.301849 --- ParallelTerminationStrategy: PID 24779 died... 16:33:03.357651 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24779): Terminated: ok {rc=0} 16:33:03.367765 --- ParallelTerminationStrategy: PID 24780 died... 16:33:03.423137 run iperf3-srv_10.42.42.10(pid=24780): Terminated {rc=256} 16:33:03.433270 --- ParallelTerminationStrategy: PID 24781 died... 16:33:03.489052 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24781): Terminated: ok {rc=0} 16:33:03.499198 --- ParallelTerminationStrategy: PID 24782 died... 16:33:03.554371 run iperf3-srv_10.42.42.10(pid=24782): Terminated {rc=256} 16:33:03.564468 --- ParallelTerminationStrategy: PID 24785 died... 16:33:03.619713 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24785): Terminated: ok {rc=0} 16:33:03.629949 --- ParallelTerminationStrategy: PID 24788 died... 16:33:03.685945 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24788): Terminated: ok {rc=0} 16:33:03.696092 --- ParallelTerminationStrategy: PID 24792 died... 16:33:03.751888 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24792): Terminated: ok {rc=0} 16:33:03.838391 bus /gobi_0: Setting Powered False 16:33:04.945408 bus /gobi_0: Setting Powered False 16:33:06.052531 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24789): Process ended prematurely: osmo-stp_10.42.42.5(pid=24789) [trial-2376↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24789)]