Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=2767): Process ended prematurely: osmo-stp_10.42.42.5(pid=2767) [trial-2383↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2767)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:30:10.368313 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:30:10.379844 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:30:10.546129 tst cs_paging_gprs_active.py: using LAC 31938 22:30:10.672083 tst cs_paging_gprs_active.py: using RAC 63 22:30:10.794319 tst cs_paging_gprs_active.py: using CellId 31938 22:30:10.912692 tst cs_paging_gprs_active.py: using BVCI 31939 22:30:10.936020 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:30:10.947196 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:30:10.957812 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:30:10.968569 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:30:10.979411 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:30:10.990344 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:30:11.001346 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:30:11.012322 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:30:11.023222 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:30:11.142971 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:30:11.437947 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:30:11.573226 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:30:11.908295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2757): Launched 22:30:12.187383 run iperf3-srv_10.42.42.10(pid=2758): Launched 22:30:12.386229 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:30:12.521601 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:30:12.855990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2759): Launched 22:30:13.134039 run iperf3-srv_10.42.42.10(pid=2760): Launched 22:30:13.333299 tst cs_paging_gprs_active.py:38: start network... 22:30:13.468526 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:30:13.986828 run create_hlr_db(pid=2761): Launched 22:30:14.174932 bus /gobi_6: Setting Powered False 22:30:15.196305 run create_hlr_db(pid=2761): Terminated: ok {rc=0} 22:30:15.605666 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2763): Launched 22:30:16.055829 run osmo-hlr_10.42.42.2(pid=2764): Launched 22:30:16.240508 run osmo-stp_10.42.42.5: Starting osmo-stp 22:30:16.841057 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2766): Launched 22:30:17.190183 run osmo-stp_10.42.42.5(pid=2767): Launched 22:30:17.411703 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:30:17.982236 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2769): Launched 22:30:18.099087 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:30:18.382185 run patchelf(pid=2770): Launched 22:30:18.572300 run osmo-stp_10.42.42.5(pid=2767): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2767)] 22:30:18.711124 run osmo-stp_10.42.42.5(pid=2767): stdout: | (launched: 2022-12-12_22:30:16.998914) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:30:18.850159 run osmo-stp_10.42.42.5(pid=2767): stderr: | �[0;m�[38;5;43m20221212223017328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223017341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223017341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223017342 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223017342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223017342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223017342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:30:18.984762 run osmo-stp_10.42.42.5(pid=2767): stdout: | (launched: 2022-12-12_22:30:16.998914) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:30:19.118277 run osmo-stp_10.42.42.5(pid=2767): stderr: | �[0;m�[38;5;43m20221212223017328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223017341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223017341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223017342 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223017342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223017342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223017342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:30:19.274653 run patchelf(pid=2770): Terminating (SIGINT) 22:30:19.458139 run patchelf(pid=2770): Terminated: ok {rc=0} 22:30:19.491572 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2767): Process ended prematurely: osmo-stp_10.42.42.5(pid=2767) [trial-2383↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2767)] [trial-2383↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:30:19.501360 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 22:30:19.563515 run osmo-hlr_10.42.42.2(pid=2764): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2764)] 22:30:19.614569 run osmo-hlr_10.42.42.2(pid=2764): stdout: | (launched: 2022-12-12_22:30:15.760326) 22:30:19.666069 run osmo-hlr_10.42.42.2(pid=2764): stderr: | �[0;m�[1;31m20221212223015985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212223015985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212223015985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212223015985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212223015985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212223015986 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212223015999 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212223016016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212223016016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212223016016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:30:19.710067 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2757): Terminating (SIGTERM) 22:30:19.751508 run iperf3-srv_10.42.42.10(pid=2758): Terminating (SIGTERM) 22:30:19.792993 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2759): Terminating (SIGTERM) 22:30:19.834502 run iperf3-srv_10.42.42.10(pid=2760): Terminating (SIGTERM) 22:30:19.875912 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2763): Terminating (SIGTERM) 22:30:19.917400 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2766): Terminating (SIGTERM) 22:30:19.959189 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2769): Terminating (SIGTERM) 22:30:19.968786 --- ParallelTerminationStrategy: PID 2757 died... 22:30:20.024924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2757): Terminated: ok {rc=0} 22:30:20.034884 --- ParallelTerminationStrategy: PID 2758 died... 22:30:20.090200 run iperf3-srv_10.42.42.10(pid=2758): Terminated {rc=256} 22:30:20.100134 --- ParallelTerminationStrategy: PID 2759 died... 22:30:20.155347 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2759): Terminated: ok {rc=0} 22:30:20.165427 --- ParallelTerminationStrategy: PID 2760 died... 22:30:20.220274 run iperf3-srv_10.42.42.10(pid=2760): Terminated {rc=256} 22:30:20.230375 --- ParallelTerminationStrategy: PID 2763 died... 22:30:20.285174 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2763): Terminated: ok {rc=0} 22:30:20.295141 --- ParallelTerminationStrategy: PID 2766 died... 22:30:20.350088 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2766): Terminated: ok {rc=0} 22:30:20.360079 --- ParallelTerminationStrategy: PID 2769 died... 22:30:20.415022 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2769): Terminated: ok {rc=0} 22:30:20.501289 bus /gobi_0: Setting Powered False 22:30:21.603605 bus /gobi_0: Setting Powered False 22:30:22.711486 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2767): Process ended prematurely: osmo-stp_10.42.42.5(pid=2767) [trial-2383↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2767)]