Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=28846): Process ended prematurely: osmo-stp_10.42.42.5(pid=28846) [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28846)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 08:55:11.227262 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:11.238339 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 08:55:11.378956 tst cs_paging_gprs_active.py: using LAC 32850 08:55:11.505336 tst cs_paging_gprs_active.py: using RAC 210 08:55:11.631674 tst cs_paging_gprs_active.py: using CellId 32850 08:55:11.751838 tst cs_paging_gprs_active.py: using BVCI 32851 08:55:11.774621 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:11.785214 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:11.795556 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:11.805839 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:11.815946 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:11.826355 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:11.836918 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:11.847301 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:11.858181 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:55:11.973526 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:55:12.263775 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:55:12.396843 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:55:12.723414 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28836): Launched 08:55:12.997312 run iperf3-srv_10.42.42.10(pid=28837): Launched 08:55:13.192392 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:55:13.325252 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:55:13.653538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28838): Launched 08:55:13.926032 run iperf3-srv_10.42.42.10(pid=28839): Launched 08:55:14.120802 tst cs_paging_gprs_active.py:38: start network... 08:55:14.253782 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:55:14.762381 run create_hlr_db(pid=28840): Launched 08:55:14.947658 bus /sierra_2: Setting Powered False 08:55:15.969444 run create_hlr_db(pid=28840): Terminated: ok {rc=0} 08:55:16.415462 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28842): Launched 08:55:16.861299 run osmo-hlr_10.42.42.2(pid=28843): Launched 08:55:17.101434 run osmo-stp_10.42.42.5: Starting osmo-stp 08:55:17.709464 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28845): Launched 08:55:18.006556 run osmo-stp_10.42.42.5(pid=28846): Launched 08:55:18.116818 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:55:18.633949 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28848): Launched 08:55:18.740118 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:55:18.998488 run patchelf(pid=28849): Launched 08:55:19.173190 run osmo-stp_10.42.42.5(pid=28846): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28846)] 08:55:19.300517 run osmo-stp_10.42.42.5(pid=28846): stdout: | (launched: 2022-12-13_08:55:17.860533) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:19.428336 run osmo-stp_10.42.42.5(pid=28846): stderr: | �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085518029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:19.551603 run osmo-stp_10.42.42.5(pid=28846): stdout: | (launched: 2022-12-13_08:55:17.860533) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:19.673607 run osmo-stp_10.42.42.5(pid=28846): stderr: | �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085518029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:19.815510 run patchelf(pid=28849): Terminating (SIGINT) 08:55:19.982564 run patchelf(pid=28849): Terminated: ok {rc=0} 08:55:20.013449 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28846): Process ended prematurely: osmo-stp_10.42.42.5(pid=28846) [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28846)] [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 08:55:20.022705 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 08:55:20.082466 run osmo-hlr_10.42.42.2(pid=28843): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28843)] 08:55:20.131070 run osmo-hlr_10.42.42.2(pid=28843): stdout: | (launched: 2022-12-13_08:55:16.580135) 08:55:20.180358 run osmo-hlr_10.42.42.2(pid=28843): stderr: | �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213085517031 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213085517057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213085517061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213085517061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:55:20.222452 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28836): Terminating (SIGTERM) 08:55:20.262184 run iperf3-srv_10.42.42.10(pid=28837): Terminating (SIGTERM) 08:55:20.301894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28838): Terminating (SIGTERM) 08:55:20.341508 run iperf3-srv_10.42.42.10(pid=28839): Terminating (SIGTERM) 08:55:20.381109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28842): Terminating (SIGTERM) 08:55:20.420658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28845): Terminating (SIGTERM) 08:55:20.460799 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28848): Terminating (SIGTERM) 08:55:20.470085 --- ParallelTerminationStrategy: PID 28836 died... 08:55:20.523851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28836): Terminated: ok {rc=0} 08:55:20.533395 --- ParallelTerminationStrategy: PID 28837 died... 08:55:20.586339 run iperf3-srv_10.42.42.10(pid=28837): Terminated {rc=256} 08:55:20.595695 --- ParallelTerminationStrategy: PID 28838 died... 08:55:20.648259 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28838): Terminated: ok {rc=0} 08:55:20.657646 --- ParallelTerminationStrategy: PID 28839 died... 08:55:20.710329 run iperf3-srv_10.42.42.10(pid=28839): Terminated {rc=256} 08:55:20.719657 --- ParallelTerminationStrategy: PID 28842 died... 08:55:20.772378 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28842): Terminated: ok {rc=0} 08:55:20.781836 --- ParallelTerminationStrategy: PID 28845 died... 08:55:20.834644 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28845): Terminated: ok {rc=0} 08:55:20.844230 --- ParallelTerminationStrategy: PID 28848 died... 08:55:20.897357 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28848): Terminated: ok {rc=0} 08:55:20.985383 bus /gobi_0: Setting Powered False 08:55:22.087299 bus /gobi_0: Setting Powered False 08:55:23.192982 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28846): Process ended prematurely: osmo-stp_10.42.42.5(pid=28846) [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28846)]