Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11493): Process ended prematurely: osmo-stp_10.42.42.5(pid=11493) [trial-2388↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11493)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:56:55.859197 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:56:55.870620 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:56:56.037752 tst cs_paging_gprs_active.py: using LAC 33464 10:56:56.167495 tst cs_paging_gprs_active.py: using RAC 59 10:56:56.297931 tst cs_paging_gprs_active.py: using CellId 33464 10:56:56.427782 tst cs_paging_gprs_active.py: using BVCI 33465 10:56:56.453239 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:56:56.464667 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:56:56.475873 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:56:56.487229 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:56:56.498956 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:56:56.510811 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:56:56.522716 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:56:56.534369 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:56:56.546224 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:56:56.665263 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:56:56.950751 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:56:57.076829 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:56:57.390972 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11483): Launched 10:56:57.653670 run iperf3-srv_10.42.42.10(pid=11484): Launched 10:56:57.839247 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:56:57.964845 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:56:58.279200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11485): Launched 10:56:58.539250 run iperf3-srv_10.42.42.10(pid=11486): Launched 10:56:58.723862 tst cs_paging_gprs_active.py:38: start network... 10:56:58.851018 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:56:59.337402 run create_hlr_db(pid=11487): Launched 10:56:59.511008 bus /gobi_6: Setting Powered False 10:57:00.533374 run create_hlr_db(pid=11487): Terminated: ok {rc=0} 10:57:00.999180 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11489): Launched 10:57:01.403154 run osmo-hlr_10.42.42.2(pid=11490): Launched 10:57:01.588797 run osmo-stp_10.42.42.5: Starting osmo-stp 10:57:02.217683 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11492): Launched 10:57:02.523406 run osmo-stp_10.42.42.5(pid=11493): Launched 10:57:02.634746 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:57:03.175959 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11495): Launched 10:57:03.295156 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:57:03.559762 run patchelf(pid=11496): Launched 10:57:03.738390 run osmo-stp_10.42.42.5(pid=11493): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11493)] 10:57:03.867979 run osmo-stp_10.42.42.5(pid=11493): stdout: | (launched: 2022-12-13_10:57:02.373503) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:57:03.997613 run osmo-stp_10.42.42.5(pid=11493): stderr: | �[0;m�[38;5;43m20221213105702543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213105702544 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213105702544 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213105702544 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213105702547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213105702547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213105702547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:57:04.122909 run osmo-stp_10.42.42.5(pid=11493): stdout: | (launched: 2022-12-13_10:57:02.373503) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:57:04.246849 run osmo-stp_10.42.42.5(pid=11493): stderr: | �[0;m�[38;5;43m20221213105702543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213105702544 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213105702544 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213105702544 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213105702547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213105702547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213105702547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:57:04.392619 run patchelf(pid=11496): Terminating (SIGINT) 10:57:04.563902 run patchelf(pid=11496): Terminated: ok {rc=0} 10:57:04.595165 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11493): Process ended prematurely: osmo-stp_10.42.42.5(pid=11493) [trial-2388↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11493)] [trial-2388↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:57:04.604284 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 10:57:04.663248 run osmo-hlr_10.42.42.2(pid=11490): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11490)] 10:57:04.711552 run osmo-hlr_10.42.42.2(pid=11490): stdout: | (launched: 2022-12-13_10:57:01.157576) 10:57:04.760404 run osmo-hlr_10.42.42.2(pid=11490): stderr: | �[0;m�[1;31m20221213105701500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213105701500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213105701500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213105701500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213105701500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213105701500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213105701532 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213105701544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213105701544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213105701544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:57:04.802483 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11483): Terminating (SIGTERM) 10:57:04.842141 run iperf3-srv_10.42.42.10(pid=11484): Terminating (SIGTERM) 10:57:04.881256 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11485): Terminating (SIGTERM) 10:57:04.920216 run iperf3-srv_10.42.42.10(pid=11486): Terminating (SIGTERM) 10:57:04.959310 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11489): Terminating (SIGTERM) 10:57:04.998330 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11492): Terminating (SIGTERM) 10:57:05.037909 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11495): Terminating (SIGTERM) 10:57:05.047009 --- ParallelTerminationStrategy: PID 11483 died... 10:57:05.099504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11483): Terminated: ok {rc=0} 10:57:05.108908 --- ParallelTerminationStrategy: PID 11484 died... 10:57:05.161036 run iperf3-srv_10.42.42.10(pid=11484): Terminated {rc=256} 10:57:05.170470 --- ParallelTerminationStrategy: PID 11485 died... 10:57:05.223066 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11485): Terminated: ok {rc=0} 10:57:05.232505 --- ParallelTerminationStrategy: PID 11486 died... 10:57:05.284687 run iperf3-srv_10.42.42.10(pid=11486): Terminated {rc=256} 10:57:05.294172 --- ParallelTerminationStrategy: PID 11489 died... 10:57:05.346640 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11489): Terminated: ok {rc=0} 10:57:05.356042 --- ParallelTerminationStrategy: PID 11492 died... 10:57:05.408273 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11492): Terminated: ok {rc=0} 10:57:05.417820 --- ParallelTerminationStrategy: PID 11495 died... 10:57:05.470171 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11495): Terminated: ok {rc=0} 10:57:05.556220 bus /gobi_0: Setting Powered False 10:57:06.660218 bus /gobi_0: Setting Powered False 10:57:07.769767 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11493): Process ended prematurely: osmo-stp_10.42.42.5(pid=11493) [trial-2388↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11493)]