Failed
dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=27729): Process ended prematurely: osmo-stp_10.42.42.5(pid=27729) [trial-2394↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27729)]
Standard Output
---------------------------------------------- trial-2394 dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 20:23:58.464601 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:23:58.475919 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 20:23:58.623731 tst switch_tch_pdch.py: using LAC 36051 20:23:58.743881 tst switch_tch_pdch.py: using RAC 96 20:23:58.864694 tst switch_tch_pdch.py: using CellId 36051 20:23:58.985556 tst switch_tch_pdch.py: using BVCI 36052 20:23:59.008660 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:23:59.020002 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:23:59.031170 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:23:59.042403 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:23:59.053664 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:23:59.065093 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:23:59.076556 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:23:59.087926 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 20:23:59.209578 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 20:23:59.489652 tst switch_tch_pdch.py:51: start network... 20:23:59.614519 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:24:00.089067 run create_hlr_db(pid=27564): Launched 20:24:00.262534 bus /gobi_6: Setting Powered False 20:24:01.380085 run create_hlr_db(pid=27564): Terminated: ok {rc=0} 20:24:01.893753 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27613): Launched 20:24:02.397239 run osmo-hlr_10.42.42.2(pid=27626): Launched 20:24:02.703459 run osmo-stp_10.42.42.5: Starting osmo-stp 20:24:03.431801 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27692): Launched 20:24:03.916640 run osmo-stp_10.42.42.5(pid=27729): Launched 20:24:04.160743 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:24:04.810026 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27842): Launched 20:24:04.920596 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:24:05.205438 run patchelf(pid=27843): Launched 20:24:05.387244 run osmo-stp_10.42.42.5(pid=27729): ERR: Terminated: ERROR {rc=1} [trial-2394↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27729)] 20:24:05.520905 run osmo-stp_10.42.42.5(pid=27729): stdout: | (launched: 2022-12-13_20:24:03.618101) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:24:05.654808 run osmo-stp_10.42.42.5(pid=27729): stderr: | �[0;m�[38;5;43m20221213202403999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213202403999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213202403999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213202404000 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213202404000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213202404000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213202404000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:24:05.785616 run osmo-stp_10.42.42.5(pid=27729): stdout: | (launched: 2022-12-13_20:24:03.618101) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:24:05.914927 run osmo-stp_10.42.42.5(pid=27729): stderr: | �[0;m�[38;5;43m20221213202403999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213202403999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213202403999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213202404000 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213202404000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213202404000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213202404000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:24:06.063149 run patchelf(pid=27843): Terminating (SIGINT) 20:24:06.238357 run patchelf(pid=27843): Terminated: ok {rc=0} 20:24:06.271362 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=27729): Process ended prematurely: osmo-stp_10.42.42.5(pid=27729) [trial-2394↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27729)] [trial-2394↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 20:24:06.281020 tst switch_tch_pdch.py:54: Test FAILED (7.8 sec) 20:24:06.344228 run osmo-hlr_10.42.42.2(pid=27626): ERR: Terminated: ERROR {rc=237} [trial-2394↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27626)] 20:24:06.397294 run osmo-hlr_10.42.42.2(pid=27626): stdout: | (launched: 2022-12-13_20:24:02.086067) 20:24:06.450911 run osmo-hlr_10.42.42.2(pid=27626): stderr: | �[0;m�[1;31m20221213202402499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213202402499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213202402499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213202402499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213202402500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213202402500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213202402525 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213202402543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213202402543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213202402543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:24:06.496174 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27613): Terminating (SIGTERM) 20:24:06.540744 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27692): Terminating (SIGTERM) 20:24:06.585542 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27842): Terminating (SIGTERM) 20:24:06.595301 --- ParallelTerminationStrategy: PID 27613 died... 20:24:06.653208 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27613): Terminated: ok {rc=0} 20:24:06.664414 --- ParallelTerminationStrategy: PID 27692 died... 20:24:06.721712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27692): Terminated: ok {rc=0} 20:24:06.732178 --- ParallelTerminationStrategy: PID 27842 died... 20:24:06.790199 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27842): Terminated: ok {rc=0} 20:24:06.881433 bus /gobi_0: Setting Powered False 20:24:07.991974 bus /gobi_0: Setting Powered False 20:24:09.106415 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27729): Process ended prematurely: osmo-stp_10.42.42.5(pid=27729) [trial-2394↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27729)]