Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=25850): Process ended prematurely: osmo-stp_10.42.42.5(pid=25850) [trial-2397↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25850)]
Standard Output
---------------------------------------------- trial-2397 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 01:49:57.133141 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:57.144456 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 01:49:57.286450 tst cs_paging_gprs_active.py: using LAC 37711 01:49:57.413694 tst cs_paging_gprs_active.py: using RAC 226 01:49:57.542525 tst cs_paging_gprs_active.py: using CellId 37711 01:49:57.669241 tst cs_paging_gprs_active.py: using BVCI 37712 01:49:57.694187 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:57.705446 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:57.716285 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:57.727291 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:57.738701 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:57.750141 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:57.761715 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:57.772938 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:57.784500 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:49:57.902169 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:49:58.201762 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:49:58.338001 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:49:58.677258 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25837): Launched 01:49:58.959304 run iperf3-srv_10.42.42.10(pid=25838): Launched 01:49:59.160176 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:49:59.295923 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:49:59.634890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25839): Launched 01:49:59.915308 run iperf3-srv_10.42.42.10(pid=25840): Launched 01:50:00.115701 tst cs_paging_gprs_active.py:38: start network... 01:50:00.253719 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:50:00.743732 run create_hlr_db(pid=25841): Launched 01:50:00.965666 bus /sierra_2: Setting Powered False 01:50:01.964290 run create_hlr_db(pid=25841): Terminated: ok {rc=0} 01:50:02.433478 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25846): Launched 01:50:02.760942 run osmo-hlr_10.42.42.2(pid=25847): Launched 01:50:02.882059 run osmo-stp_10.42.42.5: Starting osmo-stp 01:50:03.451943 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25849): Launched 01:50:03.780436 run osmo-stp_10.42.42.5(pid=25850): Launched 01:50:03.898460 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:50:04.469142 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25852): Launched 01:50:04.585220 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:50:04.870963 run patchelf(pid=25853): Launched 01:50:05.063036 run osmo-stp_10.42.42.5(pid=25850): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25850)] 01:50:05.202710 run osmo-stp_10.42.42.5(pid=25850): stdout: | (launched: 2022-12-14_01:50:03.617161) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:50:05.342786 run osmo-stp_10.42.42.5(pid=25850): stderr: | �[0;m�[38;5;43m20221214015003809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214015003809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214015003809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214015003810 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214015003810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214015003810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214015003810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:50:05.477621 run osmo-stp_10.42.42.5(pid=25850): stdout: | (launched: 2022-12-14_01:50:03.617161) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:50:05.611104 run osmo-stp_10.42.42.5(pid=25850): stderr: | �[0;m�[38;5;43m20221214015003809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214015003809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214015003809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214015003810 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214015003810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214015003810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214015003810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:50:05.766750 run patchelf(pid=25853): Terminating (SIGINT) 01:50:05.949419 run patchelf(pid=25853): Terminated: ok {rc=0} 01:50:05.983231 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25850): Process ended prematurely: osmo-stp_10.42.42.5(pid=25850) [trial-2397↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25850)] [trial-2397↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 01:50:05.993749 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 01:50:06.056510 run osmo-hlr_10.42.42.2(pid=25847): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25847)] 01:50:06.107600 run osmo-hlr_10.42.42.2(pid=25847): stdout: | (launched: 2022-12-14_01:50:02.598581) 01:50:06.159345 run osmo-hlr_10.42.42.2(pid=25847): stderr: | �[0;m�[1;31m20221214015002795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214015002795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214015002795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214015002795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214015002795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214015002795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214015002808 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214015002818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214015002818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214015002818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:50:06.203444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25837): Terminating (SIGTERM) 01:50:06.245034 run iperf3-srv_10.42.42.10(pid=25838): Terminating (SIGTERM) 01:50:06.286911 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25839): Terminating (SIGTERM) 01:50:06.328418 run iperf3-srv_10.42.42.10(pid=25840): Terminating (SIGTERM) 01:50:06.369926 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25846): Terminating (SIGTERM) 01:50:06.411307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25849): Terminating (SIGTERM) 01:50:06.453512 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25852): Terminating (SIGTERM) 01:50:06.463180 --- ParallelTerminationStrategy: PID 25837 died... 01:50:06.519156 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25837): Terminated: ok {rc=0} 01:50:06.529417 --- ParallelTerminationStrategy: PID 25838 died... 01:50:06.584658 run iperf3-srv_10.42.42.10(pid=25838): Terminated {rc=256} 01:50:06.594510 --- ParallelTerminationStrategy: PID 25839 died... 01:50:06.649603 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25839): Terminated: ok {rc=0} 01:50:06.659465 --- ParallelTerminationStrategy: PID 25840 died... 01:50:06.714720 run iperf3-srv_10.42.42.10(pid=25840): Terminated {rc=256} 01:50:06.724573 --- ParallelTerminationStrategy: PID 25846 died... 01:50:06.779688 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25846): Terminated: ok {rc=0} 01:50:06.790034 --- ParallelTerminationStrategy: PID 25849 died... 01:50:06.845769 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25849): Terminated: ok {rc=0} 01:50:06.855861 --- ParallelTerminationStrategy: PID 25852 died... 01:50:06.911868 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25852): Terminated: ok {rc=0} 01:50:06.998989 bus /gobi_0: Setting Powered False 01:50:08.104883 bus /gobi_0: Setting Powered False 01:50:09.212282 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25850): Process ended prematurely: osmo-stp_10.42.42.5(pid=25850) [trial-2397↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25850)]