Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=4609): Process ended prematurely: osmo-stp_10.42.42.5(pid=4609) [trial-2352↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4609)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 01:02:52.711017 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:52.722226 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 01:02:52.868773 tst cs_paging_gprs_active.py: using LAC 17984 01:02:52.997292 tst cs_paging_gprs_active.py: using RAC 134 01:02:53.127072 tst cs_paging_gprs_active.py: using CellId 17984 01:02:53.256655 tst cs_paging_gprs_active.py: using BVCI 17985 01:02:53.281855 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:53.292886 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:53.303641 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:53.314554 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:53.325310 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:53.336089 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:53.347220 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:53.358106 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:53.369196 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 01:02:53.485085 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 01:02:53.783881 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:02:53.921414 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:02:54.261106 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4599): Launched 01:02:54.544159 run iperf3-srv_10.42.42.10(pid=4600): Launched 01:02:54.745306 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:02:54.882270 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:02:55.224885 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4601): Launched 01:02:55.508715 run iperf3-srv_10.42.42.10(pid=4602): Launched 01:02:55.709031 tst cs_paging_gprs_active.py:38: start network... 01:02:55.846319 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:02:56.371697 run create_hlr_db(pid=4603): Launched 01:02:56.561252 bus /sierra_2: Setting Powered False 01:02:57.581815 run create_hlr_db(pid=4603): Terminated: ok {rc=0} 01:02:58.018876 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4605): Launched 01:02:58.347475 run osmo-hlr_10.42.42.2(pid=4606): Launched 01:02:58.468438 run osmo-stp_10.42.42.5: Starting osmo-stp 01:02:59.045901 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4608): Launched 01:02:59.375495 run osmo-stp_10.42.42.5(pid=4609): Launched 01:02:59.493278 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:03:00.064664 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4611): Launched 01:03:00.181286 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:03:00.469664 run patchelf(pid=4612): Launched 01:03:00.662351 run osmo-stp_10.42.42.5(pid=4609): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4609)] 01:03:00.802773 run osmo-stp_10.42.42.5(pid=4609): stdout: | (launched: 2022-12-09_01:02:59.213022) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:00.946579 run osmo-stp_10.42.42.5(pid=4609): stderr: | �[0;m�[38;5;43m20221209010259406 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010259406 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010259406 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010259407 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010259407 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010259407 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010259407 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:01.091073 run osmo-stp_10.42.42.5(pid=4609): stdout: | (launched: 2022-12-09_01:02:59.213022) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:01.245543 run osmo-stp_10.42.42.5(pid=4609): stderr: | �[0;m�[38;5;43m20221209010259406 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010259406 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010259406 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010259407 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010259407 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010259407 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010259407 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:01.405330 run patchelf(pid=4612): Terminating (SIGINT) 01:03:01.592538 run patchelf(pid=4612): Terminated: ok {rc=0} 01:03:01.627387 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4609): Process ended prematurely: osmo-stp_10.42.42.5(pid=4609) [trial-2352↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4609)] [trial-2352↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 01:03:01.637996 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 01:03:01.714638 run osmo-hlr_10.42.42.2(pid=4606): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4606)] 01:03:01.777851 run osmo-hlr_10.42.42.2(pid=4606): stdout: | (launched: 2022-12-09_01:02:58.185525) 01:03:01.842107 run osmo-hlr_10.42.42.2(pid=4606): stderr: | �[0;m�[1;31m20221209010258385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209010258386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209010258386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209010258386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209010258386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209010258386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209010258398 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209010258406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209010258406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209010258406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:03:01.898147 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4599): Terminating (SIGTERM) 01:03:01.951629 run iperf3-srv_10.42.42.10(pid=4600): Terminating (SIGTERM) 01:03:02.005377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4601): Terminating (SIGTERM) 01:03:02.060214 run iperf3-srv_10.42.42.10(pid=4602): Terminating (SIGTERM) 01:03:02.113946 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4605): Terminating (SIGTERM) 01:03:02.166731 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4608): Terminating (SIGTERM) 01:03:02.210333 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4611): Terminating (SIGTERM) 01:03:02.221464 --- ParallelTerminationStrategy: PID 4599 died... 01:03:02.279712 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4599): Terminated: ok {rc=0} 01:03:02.289723 --- ParallelTerminationStrategy: PID 4600 died... 01:03:02.343988 run iperf3-srv_10.42.42.10(pid=4600): Terminated {rc=256} 01:03:02.354550 --- ParallelTerminationStrategy: PID 4601 died... 01:03:02.409318 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4601): Terminated: ok {rc=0} 01:03:02.419146 --- ParallelTerminationStrategy: PID 4602 died... 01:03:02.473361 run iperf3-srv_10.42.42.10(pid=4602): Terminated {rc=256} 01:03:02.483288 --- ParallelTerminationStrategy: PID 4605 died... 01:03:02.537085 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4605): Terminated: ok {rc=0} 01:03:02.546823 --- ParallelTerminationStrategy: PID 4608 died... 01:03:02.601166 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4608): Terminated: ok {rc=0} 01:03:02.610829 --- ParallelTerminationStrategy: PID 4611 died... 01:03:02.665540 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4611): Terminated: ok {rc=0} 01:03:02.754956 bus /gobi_0: Setting Powered False 01:03:03.859552 bus /gobi_0: Setting Powered False 01:03:04.973183 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4609): Process ended prematurely: osmo-stp_10.42.42.5(pid=4609) [trial-2352↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4609)]