Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=14931): Process ended prematurely: osmo-stp_10.42.42.5(pid=14931) [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 02:51:28.575223 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:51:28.586598 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 02:51:28.724451 tst cs_paging_gprs_active.py: using LAC 18556 02:51:28.850026 tst cs_paging_gprs_active.py: using RAC 196 02:51:28.975437 tst cs_paging_gprs_active.py: using CellId 18556 02:51:29.101114 tst cs_paging_gprs_active.py: using BVCI 18557 02:51:29.125827 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:51:29.137807 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:51:29.149570 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:51:29.161388 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:51:29.172917 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:51:29.184696 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:51:29.196515 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:51:29.208125 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:51:29.219959 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 02:51:29.334638 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 02:51:29.608666 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:51:29.732334 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:51:30.039446 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14921): Launched 02:51:30.295220 run iperf3-srv_10.42.42.10(pid=14922): Launched 02:51:30.475497 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:51:30.598833 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:51:30.926196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14923): Launched 02:51:31.207597 run iperf3-srv_10.42.42.10(pid=14924): Launched 02:51:31.393879 tst cs_paging_gprs_active.py:38: start network... 02:51:31.521542 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:51:32.111575 run create_hlr_db(pid=14925): Launched 02:51:32.286647 bus /gobi_6: Setting Powered False 02:51:33.304859 run create_hlr_db(pid=14925): Terminated: ok {rc=0} 02:51:33.699937 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14927): Launched 02:51:33.997557 run osmo-hlr_10.42.42.2(pid=14928): Launched 02:51:34.112611 run osmo-stp_10.42.42.5: Starting osmo-stp 02:51:34.633257 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14930): Launched 02:51:34.929911 run osmo-stp_10.42.42.5(pid=14931): Launched 02:51:35.038604 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:51:35.553882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14933): Launched 02:51:35.659825 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:51:35.917844 run patchelf(pid=14934): Launched 02:51:36.091626 run osmo-stp_10.42.42.5(pid=14931): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)] 02:51:36.218595 run osmo-stp_10.42.42.5(pid=14931): stdout: | (launched: 2022-12-09_02:51:34.783720) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:51:36.346217 run osmo-stp_10.42.42.5(pid=14931): stderr: | �[0;m�[38;5;43m20221209025134953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025134954 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025134954 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025134954 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025134955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025134955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025134955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:51:36.469742 run osmo-stp_10.42.42.5(pid=14931): stdout: | (launched: 2022-12-09_02:51:34.783720) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:51:36.591819 run osmo-stp_10.42.42.5(pid=14931): stderr: | �[0;m�[38;5;43m20221209025134953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025134954 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025134954 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025134954 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025134955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025134955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025134955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:51:36.734438 run patchelf(pid=14934): Terminating (SIGINT) 02:51:36.902188 run patchelf(pid=14934): Terminated: ok {rc=0} 02:51:36.933219 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14931): Process ended prematurely: osmo-stp_10.42.42.5(pid=14931) [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)] [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 02:51:36.942665 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 02:51:37.002414 run osmo-hlr_10.42.42.2(pid=14928): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14928)] 02:51:37.050903 run osmo-hlr_10.42.42.2(pid=14928): stdout: | (launched: 2022-12-09_02:51:33.851114) 02:51:37.100239 run osmo-hlr_10.42.42.2(pid=14928): stderr: | �[0;m�[1;31m20221209025134024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209025134024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209025134024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209025134024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209025134024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209025134024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209025134037 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209025134045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209025134045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209025134045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:51:37.142030 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14921): Terminating (SIGTERM) 02:51:37.181445 run iperf3-srv_10.42.42.10(pid=14922): Terminating (SIGTERM) 02:51:37.220913 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14923): Terminating (SIGTERM) 02:51:37.260297 run iperf3-srv_10.42.42.10(pid=14924): Terminating (SIGTERM) 02:51:37.299796 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14927): Terminating (SIGTERM) 02:51:37.339159 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14930): Terminating (SIGTERM) 02:51:37.378656 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14933): Terminating (SIGTERM) 02:51:37.387897 --- ParallelTerminationStrategy: PID 14921 died... 02:51:37.440728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14921): Terminated: ok {rc=0} 02:51:37.450442 --- ParallelTerminationStrategy: PID 14922 died... 02:51:37.503157 run iperf3-srv_10.42.42.10(pid=14922): Terminated {rc=256} 02:51:37.512563 --- ParallelTerminationStrategy: PID 14923 died... 02:51:37.564881 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14923): Terminated: ok {rc=0} 02:51:37.574463 --- ParallelTerminationStrategy: PID 14924 died... 02:51:37.626472 run iperf3-srv_10.42.42.10(pid=14924): Terminated {rc=256} 02:51:37.635962 --- ParallelTerminationStrategy: PID 14927 died... 02:51:37.688495 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14927): Terminated: ok {rc=0} 02:51:37.697923 --- ParallelTerminationStrategy: PID 14930 died... 02:51:37.750236 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14930): Terminated: ok {rc=0} 02:51:37.759877 --- ParallelTerminationStrategy: PID 14933 died... 02:51:37.812382 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14933): Terminated: ok {rc=0} 02:51:37.900543 bus /gobi_0: Setting Powered False 02:51:39.003505 bus /gobi_0: Setting Powered False 02:51:40.113700 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14931): Process ended prematurely: osmo-stp_10.42.42.5(pid=14931) [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)]