Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14645): Process ended prematurely: osmo-stp_10.42.42.5(pid=14645) [trial-2357↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14645)]
Standard Output
---------------------------------------------- trial-2357 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:37:34.377469 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:37:34.388155 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:37:34.517202 tst cs_paging_gprs_active.py: using LAC 20248 08:37:34.636403 tst cs_paging_gprs_active.py: using RAC 103 08:37:34.754720 tst cs_paging_gprs_active.py: using CellId 20248 08:37:34.873961 tst cs_paging_gprs_active.py: using BVCI 20249 08:37:34.897613 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:37:34.908408 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:37:34.919155 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:37:34.929865 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:37:34.940351 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:37:34.950896 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:37:34.961739 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:37:34.972254 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:37:34.983000 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:37:35.104581 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:37:35.389513 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:37:35.517891 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:37:35.842591 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14634): Launched 08:37:36.123987 run iperf3-srv_10.42.42.10(pid=14636): Launched 08:37:36.325713 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:37:36.463799 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:37:36.803333 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14637): Launched 08:37:37.085359 run iperf3-srv_10.42.42.10(pid=14638): Launched 08:37:37.286081 tst cs_paging_gprs_active.py:38: start network... 08:37:37.423152 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:37:37.943782 run create_hlr_db(pid=14639): Launched 08:37:38.133935 bus /gobi_6: Setting Powered False 08:37:39.155850 run create_hlr_db(pid=14639): Terminated: ok {rc=0} 08:37:39.568308 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14641): Launched 08:37:39.876492 run osmo-hlr_10.42.42.2(pid=14642): Launched 08:37:39.998905 run osmo-stp_10.42.42.5: Starting osmo-stp 08:37:40.537019 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14644): Launched 08:37:40.847689 run osmo-stp_10.42.42.5(pid=14645): Launched 08:37:40.960086 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:37:41.497264 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14647): Launched 08:37:41.607450 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:37:41.875104 run patchelf(pid=14648): Launched 08:37:42.054375 run osmo-stp_10.42.42.5(pid=14645): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14645)] 08:37:42.185796 run osmo-stp_10.42.42.5(pid=14645): stdout: | (launched: 2022-12-09_08:37:40.693943) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:37:42.316845 run osmo-stp_10.42.42.5(pid=14645): stderr: | �[0;m�[38;5;43m20221209083740864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083740864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083740865 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083740865 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083740865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083740866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083740866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:37:42.443981 run osmo-stp_10.42.42.5(pid=14645): stdout: | (launched: 2022-12-09_08:37:40.693943) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:37:42.569619 run osmo-stp_10.42.42.5(pid=14645): stderr: | �[0;m�[38;5;43m20221209083740864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083740864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083740865 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083740865 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083740865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083740866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083740866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:37:42.715785 run patchelf(pid=14648): Terminating (SIGINT) 08:37:42.887771 run patchelf(pid=14648): Terminated: ok {rc=0} 08:37:42.919208 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14645): Process ended prematurely: osmo-stp_10.42.42.5(pid=14645) [trial-2357↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14645)] [trial-2357↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:37:42.928514 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:37:42.988486 run osmo-hlr_10.42.42.2(pid=14642): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14642)] 08:37:43.037647 run osmo-hlr_10.42.42.2(pid=14642): stdout: | (launched: 2022-12-09_08:37:39.725091) 08:37:43.087504 run osmo-hlr_10.42.42.2(pid=14642): stderr: | �[0;m�[1;31m20221209083739902 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209083739902 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209083739902 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209083739902 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209083739902 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209083739902 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209083739916 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209083739926 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209083739927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209083739927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:37:43.130099 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14634): Terminating (SIGTERM) 08:37:43.170254 run iperf3-srv_10.42.42.10(pid=14636): Terminating (SIGTERM) 08:37:43.210428 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14637): Terminating (SIGTERM) 08:37:43.250480 run iperf3-srv_10.42.42.10(pid=14638): Terminating (SIGTERM) 08:37:43.290637 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14641): Terminating (SIGTERM) 08:37:43.330798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14644): Terminating (SIGTERM) 08:37:43.371120 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14647): Terminating (SIGTERM) 08:37:43.380430 --- ParallelTerminationStrategy: PID 14634 died... 08:37:43.434010 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14634): Terminated: ok {rc=0} 08:37:43.443556 --- ParallelTerminationStrategy: PID 14636 died... 08:37:43.496509 run iperf3-srv_10.42.42.10(pid=14636): Terminated {rc=256} 08:37:43.506026 --- ParallelTerminationStrategy: PID 14637 died... 08:37:43.559571 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14637): Terminated: ok {rc=0} 08:37:43.569392 --- ParallelTerminationStrategy: PID 14638 died... 08:37:43.622590 run iperf3-srv_10.42.42.10(pid=14638): Terminated {rc=256} 08:37:43.632216 --- ParallelTerminationStrategy: PID 14641 died... 08:37:43.685803 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14641): Terminated: ok {rc=0} 08:37:43.695373 --- ParallelTerminationStrategy: PID 14644 died... 08:37:43.748358 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14644): Terminated: ok {rc=0} 08:37:43.758040 --- ParallelTerminationStrategy: PID 14647 died... 08:37:43.811537 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14647): Terminated: ok {rc=0} 08:37:43.901837 bus /gobi_0: Setting Powered False 08:37:45.006921 bus /gobi_0: Setting Powered False 08:37:46.140623 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14645): Process ended prematurely: osmo-stp_10.42.42.5(pid=14645) [trial-2357↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14645)]