Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3672): Process ended prematurely: osmo-stp_10.42.42.5(pid=3672) [trial-2370↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3672)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 06:17:54.353705 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:17:54.364704 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:17:54.519567 tst cs_paging_gprs_active.py: using LAC 26430 06:17:54.639186 tst cs_paging_gprs_active.py: using RAC 165 06:17:54.753838 tst cs_paging_gprs_active.py: using CellId 26430 06:17:54.868308 tst cs_paging_gprs_active.py: using BVCI 26431 06:17:54.890831 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:17:54.901566 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:17:54.912062 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:17:54.923063 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:17:54.933925 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:17:54.944763 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:17:54.955885 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:17:54.966743 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:17:54.977666 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:17:55.096694 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:17:55.367920 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:17:55.490092 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:17:55.794973 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3662): Launched 06:17:56.049034 run iperf3-srv_10.42.42.10(pid=3663): Launched 06:17:56.227754 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:17:56.349680 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:17:56.655257 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3664): Launched 06:17:56.908611 run iperf3-srv_10.42.42.10(pid=3665): Launched 06:17:57.086671 tst cs_paging_gprs_active.py:38: start network... 06:17:57.208702 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:17:57.670615 run create_hlr_db(pid=3666): Launched 06:17:57.839000 bus /gobi_6: Setting Powered False 06:17:58.862852 run create_hlr_db(pid=3666): Terminated: ok {rc=0} 06:17:59.281487 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3668): Launched 06:17:59.597609 run osmo-hlr_10.42.42.2(pid=3669): Launched 06:17:59.715681 run osmo-stp_10.42.42.5: Starting osmo-stp 06:18:00.261501 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3671): Launched 06:18:00.577077 run osmo-stp_10.42.42.5(pid=3672): Launched 06:18:00.691284 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:18:01.261567 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3674): Launched 06:18:01.375984 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:18:01.677196 run patchelf(pid=3675): Launched 06:18:01.866208 run osmo-stp_10.42.42.5(pid=3672): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3672)] 06:18:02.003976 run osmo-stp_10.42.42.5(pid=3672): stdout: | (launched: 2022-12-10_06:18:00.421552) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:18:02.141613 run osmo-stp_10.42.42.5(pid=3672): stderr: | �[0;m�[38;5;43m20221210061800612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061800612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061800612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061800613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061800613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061800613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061800613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:18:02.273111 run osmo-stp_10.42.42.5(pid=3672): stdout: | (launched: 2022-12-10_06:18:00.421552) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:18:02.402885 run osmo-stp_10.42.42.5(pid=3672): stderr: | �[0;m�[38;5;43m20221210061800612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061800612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061800612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061800613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061800613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061800613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061800613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:18:02.553609 run patchelf(pid=3675): Terminating (SIGINT) 06:18:02.730871 run patchelf(pid=3675): Terminated: ok {rc=0} 06:18:02.763855 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3672): Process ended prematurely: osmo-stp_10.42.42.5(pid=3672) [trial-2370↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3672)] [trial-2370↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 06:18:02.773895 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 06:18:02.836700 run osmo-hlr_10.42.42.2(pid=3669): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3669)] 06:18:02.887332 run osmo-hlr_10.42.42.2(pid=3669): stdout: | (launched: 2022-12-10_06:17:59.442102) 06:18:02.938601 run osmo-hlr_10.42.42.2(pid=3669): stderr: | �[0;m�[1;31m20221210061759640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210061759640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210061759640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210061759640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210061759640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210061759640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210061759653 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210061759662 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210061759662 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210061759662 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:18:02.982351 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3662): Terminating (SIGTERM) 06:18:03.023635 run iperf3-srv_10.42.42.10(pid=3663): Terminating (SIGTERM) 06:18:03.065163 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3664): Terminating (SIGTERM) 06:18:03.106527 run iperf3-srv_10.42.42.10(pid=3665): Terminating (SIGTERM) 06:18:03.147809 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3668): Terminating (SIGTERM) 06:18:03.189178 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3671): Terminating (SIGTERM) 06:18:03.230455 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3674): Terminating (SIGTERM) 06:18:03.240095 --- ParallelTerminationStrategy: PID 3662 died... 06:18:03.295991 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3662): Terminated: ok {rc=0} 06:18:03.306178 --- ParallelTerminationStrategy: PID 3663 died... 06:18:03.361075 run iperf3-srv_10.42.42.10(pid=3663): Terminated {rc=256} 06:18:03.371138 --- ParallelTerminationStrategy: PID 3664 died... 06:18:03.426229 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3664): Terminated: ok {rc=0} 06:18:03.437454 --- ParallelTerminationStrategy: PID 3665 died... 06:18:03.492909 run iperf3-srv_10.42.42.10(pid=3665): Terminated {rc=256} 06:18:03.503015 --- ParallelTerminationStrategy: PID 3668 died... 06:18:03.557959 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3668): Terminated: ok {rc=0} 06:18:03.568032 --- ParallelTerminationStrategy: PID 3671 died... 06:18:03.622798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3671): Terminated: ok {rc=0} 06:18:03.632843 --- ParallelTerminationStrategy: PID 3674 died... 06:18:03.687755 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3674): Terminated: ok {rc=0} 06:18:03.773547 bus /gobi_0: Setting Powered False 06:18:04.879905 bus /gobi_0: Setting Powered False 06:18:05.986558 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3672): Process ended prematurely: osmo-stp_10.42.42.5(pid=3672) [trial-2370↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3672)]