Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=32018): Process ended prematurely: osmo-stp_10.42.42.5(pid=32018) [trial-2370↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32018)]
Standard Output
---------------------------------------------- trial-2370 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 05:43:31.146043 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:43:31.157938 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 05:43:31.307982 tst cs_paging_gprs_active.py: using LAC 26246 05:43:31.433635 tst cs_paging_gprs_active.py: using RAC 236 05:43:31.589582 tst cs_paging_gprs_active.py: using CellId 26246 05:43:31.727681 tst cs_paging_gprs_active.py: using BVCI 26247 05:43:31.754305 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:43:31.766635 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:43:31.778899 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:43:31.792234 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:43:31.804271 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:43:31.816823 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:43:31.829210 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:43:31.841110 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:43:31.854661 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:43:31.991999 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:43:32.278569 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:43:32.407308 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:43:32.724661 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32008): Launched 05:43:32.989229 run iperf3-srv_10.42.42.10(pid=32009): Launched 05:43:33.174798 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:43:33.306004 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:43:33.644013 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32010): Launched 05:43:33.924827 run iperf3-srv_10.42.42.10(pid=32011): Launched 05:43:34.124032 tst cs_paging_gprs_active.py:38: start network... 05:43:34.259298 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:43:34.781502 run create_hlr_db(pid=32012): Launched 05:43:34.968607 bus /gobi_6: Setting Powered False 05:43:35.990042 run create_hlr_db(pid=32012): Terminated: ok {rc=0} 05:43:36.401403 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32014): Launched 05:43:36.708535 run osmo-hlr_10.42.42.2(pid=32015): Launched 05:43:36.828377 run osmo-stp_10.42.42.5: Starting osmo-stp 05:43:37.368790 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32017): Launched 05:43:37.675089 run osmo-stp_10.42.42.5(pid=32018): Launched 05:43:37.785616 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:43:38.318244 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32020): Launched 05:43:38.426834 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:43:38.694706 run patchelf(pid=32021): Launched 05:43:38.872893 run osmo-stp_10.42.42.5(pid=32018): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32018)] 05:43:39.003386 run osmo-stp_10.42.42.5(pid=32018): stdout: | (launched: 2022-12-10_05:43:37.523346) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:43:39.134303 run osmo-stp_10.42.42.5(pid=32018): stderr: | �[0;m�[38;5;43m20221210054337697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210054337697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210054337698 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210054337698 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210054337699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210054337699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210054337699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:43:39.260087 run osmo-stp_10.42.42.5(pid=32018): stdout: | (launched: 2022-12-10_05:43:37.523346) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:43:39.384757 run osmo-stp_10.42.42.5(pid=32018): stderr: | �[0;m�[38;5;43m20221210054337697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210054337697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210054337698 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210054337698 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210054337699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210054337699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210054337699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:43:39.530309 run patchelf(pid=32021): Terminating (SIGINT) 05:43:39.701201 run patchelf(pid=32021): Terminated: ok {rc=0} 05:43:39.732522 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32018): Process ended prematurely: osmo-stp_10.42.42.5(pid=32018) [trial-2370↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32018)] [trial-2370↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 05:43:39.741795 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 05:43:39.802170 run osmo-hlr_10.42.42.2(pid=32015): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32015)] 05:43:39.851055 run osmo-hlr_10.42.42.2(pid=32015): stdout: | (launched: 2022-12-10_05:43:36.556304) 05:43:39.900745 run osmo-hlr_10.42.42.2(pid=32015): stderr: | �[0;m�[1;31m20221210054336735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210054336735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210054336735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210054336735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210054336735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210054336736 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210054336747 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210054336756 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210054336756 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210054336757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:43:39.942600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32008): Terminating (SIGTERM) 05:43:39.982097 run iperf3-srv_10.42.42.10(pid=32009): Terminating (SIGTERM) 05:43:40.022029 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32010): Terminating (SIGTERM) 05:43:40.061362 run iperf3-srv_10.42.42.10(pid=32011): Terminating (SIGTERM) 05:43:40.101191 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32014): Terminating (SIGTERM) 05:43:40.140930 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32017): Terminating (SIGTERM) 05:43:40.180541 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32020): Terminating (SIGTERM) 05:43:40.189849 --- ParallelTerminationStrategy: PID 32008 died... 05:43:40.243202 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32008): Terminated: ok {rc=0} 05:43:40.252616 --- ParallelTerminationStrategy: PID 32009 died... 05:43:40.304976 run iperf3-srv_10.42.42.10(pid=32009): Terminated {rc=256} 05:43:40.314556 --- ParallelTerminationStrategy: PID 32010 died... 05:43:40.367044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32010): Terminated: ok {rc=0} 05:43:40.376589 --- ParallelTerminationStrategy: PID 32011 died... 05:43:40.429103 run iperf3-srv_10.42.42.10(pid=32011): Terminated {rc=256} 05:43:40.438706 --- ParallelTerminationStrategy: PID 32014 died... 05:43:40.491336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32014): Terminated: ok {rc=0} 05:43:40.500920 --- ParallelTerminationStrategy: PID 32017 died... 05:43:40.553842 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32017): Terminated: ok {rc=0} 05:43:40.563234 --- ParallelTerminationStrategy: PID 32020 died... 05:43:40.615888 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32020): Terminated: ok {rc=0} 05:43:40.705053 bus /gobi_0: Setting Powered False 05:43:41.812081 bus /gobi_0: Setting Powered False 05:43:42.919546 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32018): Process ended prematurely: osmo-stp_10.42.42.5(pid=32018) [trial-2370↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32018)]