Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=30669): Process ended prematurely: osmo-stp_10.42.42.5(pid=30669) [trial-2373↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30669)]
Standard Output
---------------------------------------------- trial-2373 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 10:48:19.409688 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:48:19.420882 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 10:48:19.580447 tst switch_tch_pdch.py: using LAC 27865 10:48:19.700722 tst switch_tch_pdch.py: using RAC 70 10:48:19.822347 tst switch_tch_pdch.py: using CellId 27865 10:48:19.946982 tst switch_tch_pdch.py: using BVCI 27866 10:48:19.971061 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:48:19.983097 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:48:19.994838 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:48:20.006764 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:48:20.018698 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:48:20.030966 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:48:20.042988 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:48:20.054576 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 10:48:20.170647 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 10:48:20.441968 tst switch_tch_pdch.py:51: start network... 10:48:20.563117 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:48:21.033136 run create_hlr_db(pid=30663): Launched 10:48:21.203384 bus /gobi_6: Setting Powered False 10:48:22.225520 run create_hlr_db(pid=30663): Terminated: ok {rc=0} 10:48:22.643697 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30665): Launched 10:48:22.957735 run osmo-hlr_10.42.42.2(pid=30666): Launched 10:48:23.071744 run osmo-stp_10.42.42.5: Starting osmo-stp 10:48:23.614995 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30668): Launched 10:48:23.928712 run osmo-stp_10.42.42.5(pid=30669): Launched 10:48:24.042836 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:48:24.589365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30671): Launched 10:48:24.701234 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:48:24.973742 run patchelf(pid=30672): Launched 10:48:25.157382 run osmo-stp_10.42.42.5(pid=30669): ERR: Terminated: ERROR {rc=1} [trial-2373↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30669)] 10:48:25.291821 run osmo-stp_10.42.42.5(pid=30669): stdout: | (launched: 2022-12-10_10:48:23.774526) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:48:25.426937 run osmo-stp_10.42.42.5(pid=30669): stderr: | �[0;m�[38;5;43m20221210104823964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104823964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104823964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104823965 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104823967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104823967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104823967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:48:25.556814 run osmo-stp_10.42.42.5(pid=30669): stdout: | (launched: 2022-12-10_10:48:23.774526) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:48:25.686046 run osmo-stp_10.42.42.5(pid=30669): stderr: | �[0;m�[38;5;43m20221210104823964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104823964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104823964 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104823965 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104823967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104823967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104823967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:48:25.835796 run patchelf(pid=30672): Terminating (SIGINT) 10:48:26.012148 run patchelf(pid=30672): Terminated: ok {rc=0} 10:48:26.044181 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=30669): Process ended prematurely: osmo-stp_10.42.42.5(pid=30669) [trial-2373↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30669)] [trial-2373↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 10:48:26.053419 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 10:48:26.116920 run osmo-hlr_10.42.42.2(pid=30666): ERR: Terminated: ERROR {rc=237} [trial-2373↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30666)] 10:48:26.168458 run osmo-hlr_10.42.42.2(pid=30666): stdout: | (launched: 2022-12-10_10:48:22.803299) 10:48:26.220369 run osmo-hlr_10.42.42.2(pid=30666): stderr: | �[0;m�[1;31m20221210104823002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210104823002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210104823002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210104823002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210104823002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210104823002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210104823019 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210104823029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210104823029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210104823029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:48:26.264423 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30665): Terminating (SIGTERM) 10:48:26.306270 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30668): Terminating (SIGTERM) 10:48:26.348237 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30671): Terminating (SIGTERM) 10:48:26.358328 --- ParallelTerminationStrategy: PID 30665 died... 10:48:26.415028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30665): Terminated: ok {rc=0} 10:48:26.425342 --- ParallelTerminationStrategy: PID 30668 died... 10:48:26.481115 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30668): Terminated: ok {rc=0} 10:48:26.491283 --- ParallelTerminationStrategy: PID 30671 died... 10:48:26.547292 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30671): Terminated: ok {rc=0} 10:48:26.634731 bus /gobi_0: Setting Powered False 10:48:27.739580 bus /gobi_0: Setting Powered False 10:48:28.845827 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30669): Process ended prematurely: osmo-stp_10.42.42.5(pid=30669) [trial-2373↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30669)]