Failed
gprs:nanobts+band-1900+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=31362): Process ended prematurely: osmo-stp_10.42.42.5(pid=31362) [trial-2373↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31362)]
Standard Output
---------------------------------------------- trial-2373 gprs:nanobts+band-1900+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 10:54:18.699409 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:54:18.711509 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:54:18.869663 tst ping_idle_ping.py: using LAC 27897 10:54:18.991522 tst ping_idle_ping.py: using RAC 102 10:54:19.113371 tst ping_idle_ping.py: using CellId 27897 10:54:19.234856 tst ping_idle_ping.py: using BVCI 27898 10:54:19.258949 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:54:19.270471 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:54:19.281922 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:54:19.293377 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:54:19.304629 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:54:19.316452 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:54:19.327849 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:54:19.339250 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:54:19.612214 tst ping_idle_ping.py:24: start network... 10:54:19.734503 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:54:20.208577 run create_hlr_db(pid=31356): Launched 10:54:20.379633 bus /gobi_6: Setting Powered False 10:54:21.400403 run create_hlr_db(pid=31356): Terminated: ok {rc=0} 10:54:21.792760 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31358): Launched 10:54:22.087052 run osmo-hlr_10.42.42.2(pid=31359): Launched 10:54:22.194774 run osmo-stp_10.42.42.5: Starting osmo-stp 10:54:22.705986 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31361): Launched 10:54:23.000343 run osmo-stp_10.42.42.5(pid=31362): Launched 10:54:23.107713 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:54:23.621238 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31364): Launched 10:54:23.725291 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:54:23.981040 run patchelf(pid=31365): Launched 10:54:24.153429 run osmo-stp_10.42.42.5(pid=31362): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31362)] 10:54:24.279672 run osmo-stp_10.42.42.5(pid=31362): stdout: | (launched: 2022-12-10_10:54:22.855281) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:54:24.407274 run osmo-stp_10.42.42.5(pid=31362): stderr: | �[0;m�[38;5;43m20221210105423026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210105423026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210105423026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210105423026 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210105423027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210105423027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210105423027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:54:24.529445 run osmo-stp_10.42.42.5(pid=31362): stdout: | (launched: 2022-12-10_10:54:22.855281) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:54:24.650226 run osmo-stp_10.42.42.5(pid=31362): stderr: | �[0;m�[38;5;43m20221210105423026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210105423026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210105423026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210105423026 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210105423027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210105423027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210105423027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:54:24.791449 run patchelf(pid=31365): Terminating (SIGINT) 10:54:24.957692 run patchelf(pid=31365): Terminated: ok {rc=0} 10:54:24.987752 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31362): Process ended prematurely: osmo-stp_10.42.42.5(pid=31362) [trial-2373↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31362)] [trial-2373↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 10:54:24.996283 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 10:54:25.055495 run osmo-hlr_10.42.42.2(pid=31359): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31359)] 10:54:25.103881 run osmo-hlr_10.42.42.2(pid=31359): stdout: | (launched: 2022-12-10_10:54:21.942381) 10:54:25.152693 run osmo-hlr_10.42.42.2(pid=31359): stderr: | �[0;m�[1;31m20221210105422118 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210105422118 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210105422118 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210105422118 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210105422118 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210105422118 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210105422130 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210105422139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210105422139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210105422139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:54:25.194390 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31358): Terminating (SIGTERM) 10:54:25.233858 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31361): Terminating (SIGTERM) 10:54:25.273290 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31364): Terminating (SIGTERM) 10:54:25.282437 --- ParallelTerminationStrategy: PID 31358 died... 10:54:25.335751 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31358): Terminated: ok {rc=0} 10:54:25.345382 --- ParallelTerminationStrategy: PID 31361 died... 10:54:25.397997 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31361): Terminated: ok {rc=0} 10:54:25.407468 --- ParallelTerminationStrategy: PID 31364 died... 10:54:25.459965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31364): Terminated: ok {rc=0} 10:54:25.543080 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31362): Process ended prematurely: osmo-stp_10.42.42.5(pid=31362) [trial-2373↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31362)]