Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=30399): Process ended prematurely: osmo-stp_10.42.42.5(pid=30399) [trial-2373↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30399)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 10:44:21.487748 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:44:21.499077 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 10:44:21.641554 tst cs_paging_gprs_active.py: using LAC 27845 10:44:21.764282 tst cs_paging_gprs_active.py: using RAC 50 10:44:21.884274 tst cs_paging_gprs_active.py: using CellId 27845 10:44:22.011870 tst cs_paging_gprs_active.py: using BVCI 27846 10:44:22.036902 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:44:22.048234 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:44:22.059409 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:44:22.071268 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:44:22.082919 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:44:22.094626 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:44:22.106677 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:44:22.118466 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:44:22.131109 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 10:44:22.248573 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 10:44:22.546451 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:44:22.684113 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:44:23.025395 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30389): Launched 10:44:23.306675 run iperf3-srv_10.42.42.10(pid=30390): Launched 10:44:23.507862 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:44:23.644852 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:44:23.985246 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30391): Launched 10:44:24.266792 run iperf3-srv_10.42.42.10(pid=30392): Launched 10:44:24.468224 tst cs_paging_gprs_active.py:38: start network... 10:44:24.605086 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:44:25.118855 run create_hlr_db(pid=30393): Launched 10:44:25.307527 bus /sierra_2: Setting Powered False 10:44:26.329648 run create_hlr_db(pid=30393): Terminated: ok {rc=0} 10:44:26.739915 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30395): Launched 10:44:27.046589 run osmo-hlr_10.42.42.2(pid=30396): Launched 10:44:27.159850 run osmo-stp_10.42.42.5: Starting osmo-stp 10:44:27.692256 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30398): Launched 10:44:27.999290 run osmo-stp_10.42.42.5(pid=30399): Launched 10:44:28.111075 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:44:28.645080 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30401): Launched 10:44:28.753922 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:44:29.021762 run patchelf(pid=30402): Launched 10:44:29.201650 run osmo-stp_10.42.42.5(pid=30399): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30399)] 10:44:29.332590 run osmo-stp_10.42.42.5(pid=30399): stdout: | (launched: 2022-12-10_10:44:27.848148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:44:29.463934 run osmo-stp_10.42.42.5(pid=30399): stderr: | �[0;m�[38;5;43m20221210104428020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104428020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104428020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104428021 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104428021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104428021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104428021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:44:29.590540 run osmo-stp_10.42.42.5(pid=30399): stdout: | (launched: 2022-12-10_10:44:27.848148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:44:29.716546 run osmo-stp_10.42.42.5(pid=30399): stderr: | �[0;m�[38;5;43m20221210104428020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104428020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104428020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104428021 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104428021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104428021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104428021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:44:29.863416 run patchelf(pid=30402): Terminating (SIGINT) 10:44:30.035813 run patchelf(pid=30402): Terminated: ok {rc=0} 10:44:30.067499 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30399): Process ended prematurely: osmo-stp_10.42.42.5(pid=30399) [trial-2373↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30399)] [trial-2373↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 10:44:30.076875 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 10:44:30.136806 run osmo-hlr_10.42.42.2(pid=30396): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30396)] 10:44:30.185397 run osmo-hlr_10.42.42.2(pid=30396): stdout: | (launched: 2022-12-10_10:44:26.895678) 10:44:30.234525 run osmo-hlr_10.42.42.2(pid=30396): stderr: | �[0;m�[1;31m20221210104427071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210104427071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210104427072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210104427072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210104427072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210104427072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210104427087 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210104427096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210104427096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210104427096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:44:30.276476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30389): Terminating (SIGTERM) 10:44:30.315983 run iperf3-srv_10.42.42.10(pid=30390): Terminating (SIGTERM) 10:44:30.355457 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30391): Terminating (SIGTERM) 10:44:30.395337 run iperf3-srv_10.42.42.10(pid=30392): Terminating (SIGTERM) 10:44:30.434972 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30395): Terminating (SIGTERM) 10:44:30.474684 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30398): Terminating (SIGTERM) 10:44:30.514390 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30401): Terminating (SIGTERM) 10:44:30.523689 --- ParallelTerminationStrategy: PID 30389 died... 10:44:30.577133 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30389): Terminated: ok {rc=0} 10:44:30.587013 --- ParallelTerminationStrategy: PID 30390 died... 10:44:30.639770 run iperf3-srv_10.42.42.10(pid=30390): Terminated {rc=256} 10:44:30.649874 --- ParallelTerminationStrategy: PID 30391 died... 10:44:30.702914 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30391): Terminated: ok {rc=0} 10:44:30.712621 --- ParallelTerminationStrategy: PID 30392 died... 10:44:30.765789 run iperf3-srv_10.42.42.10(pid=30392): Terminated {rc=256} 10:44:30.775492 --- ParallelTerminationStrategy: PID 30395 died... 10:44:30.828331 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30395): Terminated: ok {rc=0} 10:44:30.849333 --- ParallelTerminationStrategy: PID 30398 died... 10:44:30.924429 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30398): Terminated: ok {rc=0} 10:44:30.934772 --- ParallelTerminationStrategy: PID 30401 died... 10:44:30.988685 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30401): Terminated: ok {rc=0} 10:44:31.074372 bus /gobi_0: Setting Powered False 10:44:32.175737 bus /gobi_0: Setting Powered False 10:44:33.281132 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30399): Process ended prematurely: osmo-stp_10.42.42.5(pid=30399) [trial-2373↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30399)]