Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=16065): Process ended prematurely: osmo-stp_10.42.42.5(pid=16065) [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16065)]
Standard Output
---------------------------------------------- trial-2375 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 13:54:04.922144 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:04.933433 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 13:54:05.064530 tst cs_paging_gprs_active.py: using LAC 28853 13:54:05.179202 tst cs_paging_gprs_active.py: using RAC 38 13:54:05.296894 tst cs_paging_gprs_active.py: using CellId 28853 13:54:05.411623 tst cs_paging_gprs_active.py: using BVCI 28854 13:54:05.434299 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:05.445344 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:05.456263 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:05.467272 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:05.478183 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:05.488933 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:05.499954 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:05.510935 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:05.522411 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:54:05.642268 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:54:05.931644 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:54:06.064510 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:54:06.391502 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16055): Launched 13:54:06.664121 run iperf3-srv_10.42.42.10(pid=16056): Launched 13:54:06.857379 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:54:06.990206 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:54:07.316731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16057): Launched 13:54:07.589342 run iperf3-srv_10.42.42.10(pid=16058): Launched 13:54:07.784068 tst cs_paging_gprs_active.py:38: start network... 13:54:07.916802 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:54:08.418431 run create_hlr_db(pid=16059): Launched 13:54:08.601794 bus /gobi_6: Setting Powered False 13:54:09.623217 run create_hlr_db(pid=16059): Terminated: ok {rc=0} 13:54:10.020594 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16061): Launched 13:54:10.317658 run osmo-hlr_10.42.42.2(pid=16062): Launched 13:54:10.435873 run osmo-stp_10.42.42.5: Starting osmo-stp 13:54:10.985997 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16064): Launched 13:54:11.302282 run osmo-stp_10.42.42.5(pid=16065): Launched 13:54:11.418515 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:54:11.970668 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16067): Launched 13:54:12.085333 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:54:12.360430 run patchelf(pid=16068): Launched 13:54:12.546709 run osmo-stp_10.42.42.5(pid=16065): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16065)] 13:54:12.682284 run osmo-stp_10.42.42.5(pid=16065): stdout: | (launched: 2022-12-10_13:54:11.147211) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:54:12.818592 run osmo-stp_10.42.42.5(pid=16065): stderr: | �[0;m�[38;5;43m20221210135411339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135411339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135411340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135411340 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135411340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135411341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135411341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:54:12.950211 run osmo-stp_10.42.42.5(pid=16065): stdout: | (launched: 2022-12-10_13:54:11.147211) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:54:13.081338 run osmo-stp_10.42.42.5(pid=16065): stderr: | �[0;m�[38;5;43m20221210135411339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135411339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135411340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135411340 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135411340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135411341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135411341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:54:13.233548 run patchelf(pid=16068): Terminating (SIGINT) 13:54:13.412625 run patchelf(pid=16068): Terminated: ok {rc=0} 13:54:13.445807 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16065): Process ended prematurely: osmo-stp_10.42.42.5(pid=16065) [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16065)] [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 13:54:13.455766 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 13:54:13.518970 run osmo-hlr_10.42.42.2(pid=16062): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16062)] 13:54:13.570481 run osmo-hlr_10.42.42.2(pid=16062): stdout: | (launched: 2022-12-10_13:54:10.171855) 13:54:13.622833 run osmo-hlr_10.42.42.2(pid=16062): stderr: | �[0;m�[1;31m20221210135410344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210135410344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210135410344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210135410344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210135410344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210135410344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210135410355 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210135410363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210135410364 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210135410364 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:54:13.666685 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16055): Terminating (SIGTERM) 13:54:13.708606 run iperf3-srv_10.42.42.10(pid=16056): Terminating (SIGTERM) 13:54:13.750534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16057): Terminating (SIGTERM) 13:54:13.792258 run iperf3-srv_10.42.42.10(pid=16058): Terminating (SIGTERM) 13:54:13.834236 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16061): Terminating (SIGTERM) 13:54:13.876527 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16064): Terminating (SIGTERM) 13:54:13.917981 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16067): Terminating (SIGTERM) 13:54:13.927961 --- ParallelTerminationStrategy: PID 16055 died... 13:54:13.983645 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16055): Terminated: ok {rc=0} 13:54:13.994109 --- ParallelTerminationStrategy: PID 16056 died... 13:54:14.049773 run iperf3-srv_10.42.42.10(pid=16056): Terminated {rc=256} 13:54:14.059721 --- ParallelTerminationStrategy: PID 16057 died... 13:54:14.115451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16057): Terminated: ok {rc=0} 13:54:14.125466 --- ParallelTerminationStrategy: PID 16058 died... 13:54:14.180938 run iperf3-srv_10.42.42.10(pid=16058): Terminated {rc=256} 13:54:14.191022 --- ParallelTerminationStrategy: PID 16061 died... 13:54:14.246579 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16061): Terminated: ok {rc=0} 13:54:14.256511 --- ParallelTerminationStrategy: PID 16064 died... 13:54:14.311711 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16064): Terminated: ok {rc=0} 13:54:14.322049 --- ParallelTerminationStrategy: PID 16067 died... 13:54:14.378157 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16067): Terminated: ok {rc=0} 13:54:14.463863 bus /gobi_0: Setting Powered False 13:54:15.570218 bus /gobi_0: Setting Powered False 13:54:16.695764 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16065): Process ended prematurely: osmo-stp_10.42.42.5(pid=16065) [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16065)]