Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10977): Process ended prematurely: osmo-stp_10.42.42.5(pid=10977) [trial-2375↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10977)]
Standard Output
---------------------------------------------- trial-2375 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 12:57:52.140779 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:57:52.151352 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 12:57:52.293184 tst cs_paging_gprs_active.py: using LAC 28551 12:57:52.410499 tst cs_paging_gprs_active.py: using RAC 246 12:57:52.526743 tst cs_paging_gprs_active.py: using CellId 28551 12:57:52.642920 tst cs_paging_gprs_active.py: using BVCI 28552 12:57:52.665931 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:57:52.676428 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:57:52.686834 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:57:52.698059 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:57:52.709092 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:57:52.720143 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:57:52.731428 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:57:52.742580 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:57:52.753823 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:57:52.869520 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:57:53.144046 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:57:53.269778 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:57:53.576342 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10967): Launched 12:57:53.832559 run iperf3-srv_10.42.42.10(pid=10968): Launched 12:57:54.014420 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:57:54.138927 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:57:54.446660 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10969): Launched 12:57:54.702607 run iperf3-srv_10.42.42.10(pid=10970): Launched 12:57:54.884002 tst cs_paging_gprs_active.py:38: start network... 12:57:55.008203 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:57:55.477056 run create_hlr_db(pid=10971): Launched 12:57:55.648370 bus /gobi_6: Setting Powered False 12:57:56.668859 run create_hlr_db(pid=10971): Terminated: ok {rc=0} 12:57:57.089227 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10973): Launched 12:57:57.407356 run osmo-hlr_10.42.42.2(pid=10974): Launched 12:57:57.525229 run osmo-stp_10.42.42.5: Starting osmo-stp 12:57:58.076452 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10976): Launched 12:57:58.393382 run osmo-stp_10.42.42.5(pid=10977): Launched 12:57:58.509201 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:57:59.063609 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10979): Launched 12:57:59.177549 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:57:59.453994 run patchelf(pid=10980): Launched 12:57:59.639608 run osmo-stp_10.42.42.5(pid=10977): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10977)] 12:57:59.775892 run osmo-stp_10.42.42.5(pid=10977): stdout: | (launched: 2022-12-10_12:57:58.238481) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:57:59.912252 run osmo-stp_10.42.42.5(pid=10977): stderr: | �[0;m�[38;5;43m20221210125758431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125758432 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125758432 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125758432 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125758433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125758433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125758433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:58:00.043863 run osmo-stp_10.42.42.5(pid=10977): stdout: | (launched: 2022-12-10_12:57:58.238481) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:58:00.174366 run osmo-stp_10.42.42.5(pid=10977): stderr: | �[0;m�[38;5;43m20221210125758431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125758432 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125758432 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125758432 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125758433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125758433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125758433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:58:00.326108 run patchelf(pid=10980): Terminating (SIGINT) 12:58:00.504209 run patchelf(pid=10980): Terminated: ok {rc=0} 12:58:00.537041 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10977): Process ended prematurely: osmo-stp_10.42.42.5(pid=10977) [trial-2375↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10977)] [trial-2375↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 12:58:00.546569 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 12:58:00.608529 run osmo-hlr_10.42.42.2(pid=10974): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10974)] 12:58:00.659169 run osmo-hlr_10.42.42.2(pid=10974): stdout: | (launched: 2022-12-10_12:57:57.251795) 12:58:00.710609 run osmo-hlr_10.42.42.2(pid=10974): stderr: | �[0;m�[1;31m20221210125757449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210125757449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210125757449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210125757449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210125757449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210125757449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210125757461 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210125757469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210125757469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210125757469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:58:00.754434 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10967): Terminating (SIGTERM) 12:58:00.795604 run iperf3-srv_10.42.42.10(pid=10968): Terminating (SIGTERM) 12:58:00.836848 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10969): Terminating (SIGTERM) 12:58:00.883110 run iperf3-srv_10.42.42.10(pid=10970): Terminating (SIGTERM) 12:58:00.931570 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10973): Terminating (SIGTERM) 12:58:00.973341 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10976): Terminating (SIGTERM) 12:58:01.015473 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10979): Terminating (SIGTERM) 12:58:01.024930 --- ParallelTerminationStrategy: PID 10967 died... 12:58:01.080647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10967): Terminated: ok {rc=0} 12:58:01.090985 --- ParallelTerminationStrategy: PID 10968 died... 12:58:01.146387 run iperf3-srv_10.42.42.10(pid=10968): Terminated {rc=256} 12:58:01.156611 --- ParallelTerminationStrategy: PID 10969 died... 12:58:01.212208 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10969): Terminated: ok {rc=0} 12:58:01.222415 --- ParallelTerminationStrategy: PID 10970 died... 12:58:01.278408 run iperf3-srv_10.42.42.10(pid=10970): Terminated {rc=256} 12:58:01.288627 --- ParallelTerminationStrategy: PID 10973 died... 12:58:01.344396 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10973): Terminated: ok {rc=0} 12:58:01.354641 --- ParallelTerminationStrategy: PID 10976 died... 12:58:01.410678 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10976): Terminated: ok {rc=0} 12:58:01.421120 --- ParallelTerminationStrategy: PID 10979 died... 12:58:01.477056 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10979): Terminated: ok {rc=0} 12:58:01.564911 bus /gobi_0: Setting Powered False 12:58:02.669164 bus /gobi_0: Setting Powered False 12:58:03.776766 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10977): Process ended prematurely: osmo-stp_10.42.42.5(pid=10977) [trial-2375↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10977)]