Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=9541): Process ended prematurely: osmo-stp_10.42.42.5(pid=9541) [trial-2375↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9541)]
Standard Output
---------------------------------------------- trial-2375 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 12:48:54.482544 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:48:54.493936 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 12:48:54.629346 tst cs_paging_gprs_active.py: using LAC 28504 12:48:54.767041 tst cs_paging_gprs_active.py: using RAC 199 12:48:54.896690 tst cs_paging_gprs_active.py: using CellId 28504 12:48:55.020455 tst cs_paging_gprs_active.py: using BVCI 28505 12:48:55.045232 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:48:55.056185 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:48:55.066979 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:48:55.078276 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:48:55.089289 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:48:55.100368 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:48:55.111469 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:48:55.124836 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:48:55.136054 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:48:55.259910 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:48:55.567922 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:48:55.710180 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:48:56.060667 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9531): Launched 12:48:56.353984 run iperf3-srv_10.42.42.10(pid=9532): Launched 12:48:56.562394 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:48:56.704446 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:48:57.057541 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9533): Launched 12:48:57.350995 run iperf3-srv_10.42.42.10(pid=9534): Launched 12:48:57.559567 tst cs_paging_gprs_active.py:38: start network... 12:48:57.701653 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:48:58.246043 run create_hlr_db(pid=9535): Launched 12:48:58.442867 bus /gobi_6: Setting Powered False 12:48:59.461406 run create_hlr_db(pid=9535): Terminated: ok {rc=0} 12:48:59.887728 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9537): Launched 12:49:00.207579 run osmo-hlr_10.42.42.2(pid=9538): Launched 12:49:00.333439 run osmo-stp_10.42.42.5: Starting osmo-stp 12:49:00.894845 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9540): Launched 12:49:01.314714 run osmo-stp_10.42.42.5(pid=9541): Launched 12:49:01.558546 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:49:02.174389 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9543): Launched 12:49:02.296909 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:49:02.594247 run patchelf(pid=9544): Launched 12:49:02.790979 run osmo-stp_10.42.42.5(pid=9541): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9541)] 12:49:02.934556 run osmo-stp_10.42.42.5(pid=9541): stdout: | (launched: 2022-12-10_12:49:01.058853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:49:03.079222 run osmo-stp_10.42.42.5(pid=9541): stderr: | �[0;m�[38;5;43m20221210124901387 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210124901387 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210124901388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210124901388 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210124901398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210124901399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210124901399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:49:03.218912 run osmo-stp_10.42.42.5(pid=9541): stdout: | (launched: 2022-12-10_12:49:01.058853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:49:03.357497 run osmo-stp_10.42.42.5(pid=9541): stderr: | �[0;m�[38;5;43m20221210124901387 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210124901387 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210124901388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210124901388 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210124901398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210124901399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210124901399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:49:03.519004 run patchelf(pid=9544): Terminating (SIGINT) 12:49:03.707729 run patchelf(pid=9544): Terminated: ok {rc=0} 12:49:03.742259 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9541): Process ended prematurely: osmo-stp_10.42.42.5(pid=9541) [trial-2375↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9541)] [trial-2375↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 12:49:03.752175 tst cs_paging_gprs_active.py:38: Test FAILED (9.3 sec) 12:49:03.816314 run osmo-hlr_10.42.42.2(pid=9538): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9538)] 12:49:03.869009 run osmo-hlr_10.42.42.2(pid=9538): stdout: | (launched: 2022-12-10_12:49:00.049173) 12:49:03.921949 run osmo-hlr_10.42.42.2(pid=9538): stderr: | �[0;m�[1;31m20221210124900230 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210124900230 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210124900230 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210124900230 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210124900230 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210124900230 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210124900242 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210124900250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210124900250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210124900250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:49:03.967311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9531): Terminating (SIGTERM) 12:49:04.010272 run iperf3-srv_10.42.42.10(pid=9532): Terminating (SIGTERM) 12:49:04.053096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9533): Terminating (SIGTERM) 12:49:04.095769 run iperf3-srv_10.42.42.10(pid=9534): Terminating (SIGTERM) 12:49:04.138651 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9537): Terminating (SIGTERM) 12:49:04.181305 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9540): Terminating (SIGTERM) 12:49:04.224266 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9543): Terminating (SIGTERM) 12:49:04.234307 --- ParallelTerminationStrategy: PID 9531 died... 12:49:04.291505 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9531): Terminated: ok {rc=0} 12:49:04.301904 --- ParallelTerminationStrategy: PID 9532 died... 12:49:04.358511 run iperf3-srv_10.42.42.10(pid=9532): Terminated {rc=256} 12:49:04.368732 --- ParallelTerminationStrategy: PID 9533 died... 12:49:04.425694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9533): Terminated: ok {rc=0} 12:49:04.435935 --- ParallelTerminationStrategy: PID 9534 died... 12:49:04.492494 run iperf3-srv_10.42.42.10(pid=9534): Terminated {rc=256} 12:49:04.502725 --- ParallelTerminationStrategy: PID 9537 died... 12:49:04.559027 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9537): Terminated: ok {rc=0} 12:49:04.569292 --- ParallelTerminationStrategy: PID 9540 died... 12:49:04.625711 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9540): Terminated: ok {rc=0} 12:49:04.636028 --- ParallelTerminationStrategy: PID 9543 died... 12:49:04.692778 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9543): Terminated: ok {rc=0} 12:49:04.781655 bus /gobi_0: Setting Powered False 12:49:05.887154 bus /gobi_0: Setting Powered False 12:49:06.996937 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9541): Process ended prematurely: osmo-stp_10.42.42.5(pid=9541) [trial-2375↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9541)]