Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28384): Process ended prematurely: osmo-stp_10.42.42.5(pid=28384) [trial-2379↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28384)]
Standard Output
---------------------------------------------- trial-2379 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:29:46.449678 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:29:46.463544 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:29:46.621546 tst cs_paging_gprs_active.py: using LAC 30089 16:29:46.774250 tst cs_paging_gprs_active.py: using RAC 254 16:29:46.938845 tst cs_paging_gprs_active.py: using CellId 30089 16:29:47.083558 tst cs_paging_gprs_active.py: using BVCI 30090 16:29:47.108468 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:29:47.120364 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:29:47.132074 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:29:47.146307 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:29:47.157648 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:29:47.168725 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:29:47.180013 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:29:47.191177 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:29:47.202390 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:29:47.322135 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:29:47.624829 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:29:47.764612 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:29:48.111797 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28374): Launched 16:29:48.402042 run iperf3-srv_10.42.42.10(pid=28375): Launched 16:29:48.607178 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:29:48.746228 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:29:49.091551 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28376): Launched 16:29:49.381120 run iperf3-srv_10.42.42.10(pid=28377): Launched 16:29:49.586115 tst cs_paging_gprs_active.py:38: start network... 16:29:49.725359 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:29:50.252422 run create_hlr_db(pid=28378): Launched 16:29:50.445501 bus /gobi_6: Setting Powered False 16:29:51.465382 run create_hlr_db(pid=28378): Terminated: ok {rc=0} 16:29:51.908854 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28380): Launched 16:29:52.245741 run osmo-hlr_10.42.42.2(pid=28381): Launched 16:29:52.367978 run osmo-stp_10.42.42.5: Starting osmo-stp 16:29:52.949369 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28383): Launched 16:29:53.285743 run osmo-stp_10.42.42.5(pid=28384): Launched 16:29:53.406768 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:29:53.989974 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28386): Launched 16:29:54.109242 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:29:54.402144 run patchelf(pid=28387): Launched 16:29:54.596189 run osmo-stp_10.42.42.5(pid=28384): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28384)] 16:29:54.738519 run osmo-stp_10.42.42.5(pid=28384): stdout: | (launched: 2022-12-12_16:29:53.118997) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:29:54.880463 run osmo-stp_10.42.42.5(pid=28384): stderr: | �[0;m�[38;5;43m20221212162953308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212162953308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212162953308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212162953309 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212162953309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212162953309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212162953309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:29:55.018442 run osmo-stp_10.42.42.5(pid=28384): stdout: | (launched: 2022-12-12_16:29:53.118997) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:29:55.155156 run osmo-stp_10.42.42.5(pid=28384): stderr: | �[0;m�[38;5;43m20221212162953308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212162953308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212162953308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212162953309 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212162953309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212162953309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212162953309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:29:55.313953 run patchelf(pid=28387): Terminating (SIGINT) 16:29:55.500425 run patchelf(pid=28387): Terminated: ok {rc=0} 16:29:55.534575 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28384): Process ended prematurely: osmo-stp_10.42.42.5(pid=28384) [trial-2379↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28384)] [trial-2379↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:29:55.544462 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 16:29:55.608880 run osmo-hlr_10.42.42.2(pid=28381): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28381)] 16:29:55.661139 run osmo-hlr_10.42.42.2(pid=28381): stdout: | (launched: 2022-12-12_16:29:52.078633) 16:29:55.713777 run osmo-hlr_10.42.42.2(pid=28381): stderr: | �[0;m�[1;31m20221212162952275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212162952275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212162952275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212162952276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212162952276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212162952276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212162952288 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212162952297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212162952297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212162952297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:29:55.758625 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28374): Terminating (SIGTERM) 16:29:55.800875 run iperf3-srv_10.42.42.10(pid=28375): Terminating (SIGTERM) 16:29:55.843289 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28376): Terminating (SIGTERM) 16:29:55.885575 run iperf3-srv_10.42.42.10(pid=28377): Terminating (SIGTERM) 16:29:55.927940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28380): Terminating (SIGTERM) 16:29:55.970508 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28383): Terminating (SIGTERM) 16:29:56.012796 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28386): Terminating (SIGTERM) 16:29:56.022880 --- ParallelTerminationStrategy: PID 28374 died... 16:29:56.079095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28374): Terminated: ok {rc=0} 16:29:56.089488 --- ParallelTerminationStrategy: PID 28375 died... 16:29:56.145395 run iperf3-srv_10.42.42.10(pid=28375): Terminated {rc=256} 16:29:56.155338 --- ParallelTerminationStrategy: PID 28376 died... 16:29:56.211045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28376): Terminated: ok {rc=0} 16:29:56.221342 --- ParallelTerminationStrategy: PID 28377 died... 16:29:56.276735 run iperf3-srv_10.42.42.10(pid=28377): Terminated {rc=256} 16:29:56.287041 --- ParallelTerminationStrategy: PID 28380 died... 16:29:56.342966 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28380): Terminated: ok {rc=0} 16:29:56.353315 --- ParallelTerminationStrategy: PID 28383 died... 16:29:56.409058 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28383): Terminated: ok {rc=0} 16:29:56.419339 --- ParallelTerminationStrategy: PID 28386 died... 16:29:56.475084 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28386): Terminated: ok {rc=0} 16:29:56.561563 bus /gobi_0: Setting Powered False 16:29:57.669273 bus /gobi_0: Setting Powered False 16:29:58.776407 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28384): Process ended prematurely: osmo-stp_10.42.42.5(pid=28384) [trial-2379↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28384)]