Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=7503): Process ended prematurely: osmo-stp_10.42.42.5(pid=7503) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7503)]
Standard Output
---------------------------------------------- trial-2383 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 23:18:51.851659 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:51.863621 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 23:18:52.006770 tst iperf3.py: using LAC 32195 23:18:52.126093 tst iperf3.py: using RAC 65 23:18:52.245285 tst iperf3.py: using CellId 32195 23:18:52.366032 tst iperf3.py: using BVCI 32196 23:18:52.389691 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:52.400906 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:52.412086 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:52.423270 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:52.434930 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:52.446051 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:52.457896 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:52.469271 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:18:52.480909 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:18:52.762227 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 23:18:52.889046 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:18:53.204291 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7495): Launched 23:18:53.466319 run iperf3-srv_10.42.42.10(pid=7496): Launched 23:18:53.652520 tst iperf3.py:8: start network... 23:18:53.787381 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:18:54.305737 run create_hlr_db(pid=7497): Launched 23:18:54.491995 bus /gobi_6: Setting Powered False 23:18:55.512854 run create_hlr_db(pid=7497): Terminated: ok {rc=0} 23:18:55.929475 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7499): Launched 23:18:56.253213 run osmo-hlr_10.42.42.2(pid=7500): Launched 23:18:56.373455 run osmo-stp_10.42.42.5: Starting osmo-stp 23:18:56.940369 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7502): Launched 23:18:57.264508 run osmo-stp_10.42.42.5(pid=7503): Launched 23:18:57.382030 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:18:57.949883 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7505): Launched 23:18:58.066593 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:18:58.350866 run patchelf(pid=7506): Launched 23:18:58.541712 run osmo-stp_10.42.42.5(pid=7503): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7503)] 23:18:58.680388 run osmo-stp_10.42.42.5(pid=7503): stdout: | (launched: 2022-12-12_23:18:57.105868) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:58.819119 run osmo-stp_10.42.42.5(pid=7503): stderr: | �[0;m�[38;5;43m20221212231857302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231857302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231857302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231857303 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231857303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231857303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231857303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:58.953168 run osmo-stp_10.42.42.5(pid=7503): stdout: | (launched: 2022-12-12_23:18:57.105868) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:59.086430 run osmo-stp_10.42.42.5(pid=7503): stderr: | �[0;m�[38;5;43m20221212231857302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231857302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231857302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231857303 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231857303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231857303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231857303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:59.242185 run patchelf(pid=7506): Terminating (SIGINT) 23:18:59.425765 run patchelf(pid=7506): Terminated: ok {rc=0} 23:18:59.459411 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7503): Process ended prematurely: osmo-stp_10.42.42.5(pid=7503) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7503)] [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 23:18:59.469243 tst iperf3.py:8: Test FAILED (7.6 sec) 23:18:59.531561 run osmo-hlr_10.42.42.2(pid=7500): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7500)] 23:18:59.582541 run osmo-hlr_10.42.42.2(pid=7500): stdout: | (launched: 2022-12-12_23:18:56.094977) 23:18:59.634246 run osmo-hlr_10.42.42.2(pid=7500): stderr: | �[0;m�[1;31m20221212231856292 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212231856292 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212231856292 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212231856292 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212231856293 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212231856293 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212231856305 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212231856313 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212231856314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212231856314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:18:59.678037 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7495): Terminating (SIGTERM) 23:18:59.719327 run iperf3-srv_10.42.42.10(pid=7496): Terminating (SIGTERM) 23:18:59.760677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7499): Terminating (SIGTERM) 23:18:59.801933 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7502): Terminating (SIGTERM) 23:18:59.843100 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7505): Terminating (SIGTERM) 23:18:59.852598 --- ParallelTerminationStrategy: PID 7495 died... 23:18:59.908146 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7495): Terminated: ok {rc=0} 23:18:59.918044 --- ParallelTerminationStrategy: PID 7496 died... 23:18:59.972858 run iperf3-srv_10.42.42.10(pid=7496): Terminated {rc=256} 23:18:59.982721 --- ParallelTerminationStrategy: PID 7499 died... 23:19:00.037568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7499): Terminated: ok {rc=0} 23:19:00.047410 --- ParallelTerminationStrategy: PID 7502 died... 23:19:00.102221 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7502): Terminated: ok {rc=0} 23:19:00.111981 --- ParallelTerminationStrategy: PID 7505 died... 23:19:00.166686 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7505): Terminated: ok {rc=0} 23:19:00.252889 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7503): Process ended prematurely: osmo-stp_10.42.42.5(pid=7503) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7503)]