Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=17196): Process ended prematurely: osmo-stp_10.42.42.5(pid=17196) [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17196)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 11:59:33.187477 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:59:33.199163 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 11:59:33.343811 tst cs_paging_gprs_active.py: using LAC 33792 11:59:33.467856 tst cs_paging_gprs_active.py: using RAC 132 11:59:33.591472 tst cs_paging_gprs_active.py: using CellId 33792 11:59:33.715560 tst cs_paging_gprs_active.py: using BVCI 33793 11:59:33.739457 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:59:33.750937 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:59:33.762162 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:59:33.773356 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:59:33.784457 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:59:33.795623 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:59:33.806876 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:59:33.817942 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:59:33.829336 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:59:33.953065 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:59:34.256760 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:59:34.396227 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:59:34.742209 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17186): Launched 11:59:35.028715 run iperf3-srv_10.42.42.10(pid=17187): Launched 11:59:35.233382 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:59:35.373089 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:59:35.719335 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17188): Launched 11:59:36.006773 run iperf3-srv_10.42.42.10(pid=17189): Launched 11:59:36.210938 tst cs_paging_gprs_active.py:38: start network... 11:59:36.350454 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:59:36.875839 run create_hlr_db(pid=17190): Launched 11:59:37.067798 bus /gobi_6: Setting Powered False 11:59:38.088103 run create_hlr_db(pid=17190): Terminated: ok {rc=0} 11:59:38.505078 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17192): Launched 11:59:38.818625 run osmo-hlr_10.42.42.2(pid=17193): Launched 11:59:38.933462 run osmo-stp_10.42.42.5: Starting osmo-stp 11:59:39.475830 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17195): Launched 11:59:39.788110 run osmo-stp_10.42.42.5(pid=17196): Launched 11:59:39.913155 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:59:40.461359 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17198): Launched 11:59:40.571745 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:59:40.845683 run patchelf(pid=17199): Launched 11:59:41.028182 run osmo-stp_10.42.42.5(pid=17196): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17196)] 11:59:41.162178 run osmo-stp_10.42.42.5(pid=17196): stdout: | (launched: 2022-12-13_11:59:39.634113) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:59:41.295878 run osmo-stp_10.42.42.5(pid=17196): stderr: | �[0;m�[38;5;43m20221213115939805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213115939805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213115939806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213115939806 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213115939807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213115939807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213115939807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:59:41.424418 run osmo-stp_10.42.42.5(pid=17196): stdout: | (launched: 2022-12-13_11:59:39.634113) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:59:41.551609 run osmo-stp_10.42.42.5(pid=17196): stderr: | �[0;m�[38;5;43m20221213115939805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213115939805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213115939806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213115939806 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213115939807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213115939807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213115939807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:59:41.700015 run patchelf(pid=17199): Terminating (SIGINT) 11:59:41.874109 run patchelf(pid=17199): Terminated: ok {rc=0} 11:59:41.906149 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17196): Process ended prematurely: osmo-stp_10.42.42.5(pid=17196) [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17196)] [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 11:59:41.915595 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 11:59:41.976698 run osmo-hlr_10.42.42.2(pid=17193): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17193)] 11:59:42.026776 run osmo-hlr_10.42.42.2(pid=17193): stdout: | (launched: 2022-12-13_11:59:38.664313) 11:59:42.077577 run osmo-hlr_10.42.42.2(pid=17193): stderr: | �[0;m�[1;31m20221213115938840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213115938840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213115938840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213115938840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213115938840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213115938840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213115938855 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213115938864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213115938864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213115938864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:59:42.120765 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17186): Terminating (SIGTERM) 11:59:42.161883 run iperf3-srv_10.42.42.10(pid=17187): Terminating (SIGTERM) 11:59:42.202789 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17188): Terminating (SIGTERM) 11:59:42.243761 run iperf3-srv_10.42.42.10(pid=17189): Terminating (SIGTERM) 11:59:42.284741 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17192): Terminating (SIGTERM) 11:59:42.325850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17195): Terminating (SIGTERM) 11:59:42.366887 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17198): Terminating (SIGTERM) 11:59:42.376212 --- ParallelTerminationStrategy: PID 17186 died... 11:59:42.430226 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17186): Terminated: ok {rc=0} 11:59:42.439860 --- ParallelTerminationStrategy: PID 17187 died... 11:59:42.493606 run iperf3-srv_10.42.42.10(pid=17187): Terminated {rc=256} 11:59:42.503228 --- ParallelTerminationStrategy: PID 17188 died... 11:59:42.557119 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17188): Terminated: ok {rc=0} 11:59:42.566761 --- ParallelTerminationStrategy: PID 17189 died... 11:59:42.620605 run iperf3-srv_10.42.42.10(pid=17189): Terminated {rc=256} 11:59:42.630260 --- ParallelTerminationStrategy: PID 17192 died... 11:59:42.684766 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17192): Terminated: ok {rc=0} 11:59:42.694485 --- ParallelTerminationStrategy: PID 17195 died... 11:59:42.748286 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17195): Terminated: ok {rc=0} 11:59:42.757982 --- ParallelTerminationStrategy: PID 17198 died... 11:59:42.811902 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17198): Terminated: ok {rc=0} 11:59:42.901879 bus /gobi_0: Setting Powered False 11:59:44.006744 bus /gobi_0: Setting Powered False 11:59:45.119428 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17196): Process ended prematurely: osmo-stp_10.42.42.5(pid=17196) [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17196)]