Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=19159): Process ended prematurely: osmo-stp_10.42.42.5(pid=19159) [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19159)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 12:15:50.453922 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:15:50.465487 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:15:50.631007 tst cs_paging_gprs_active.py: using LAC 33878 12:15:50.758462 tst cs_paging_gprs_active.py: using RAC 218 12:15:50.886461 tst cs_paging_gprs_active.py: using CellId 33878 12:15:51.015980 tst cs_paging_gprs_active.py: using BVCI 33879 12:15:51.040894 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:15:51.052353 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:15:51.063631 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:15:51.074964 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:15:51.086658 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:15:51.098409 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:15:51.110302 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:15:51.122134 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:15:51.134054 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:15:51.252243 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:15:51.554151 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:15:51.690844 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:15:52.024312 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19149): Launched 12:15:52.288415 run iperf3-srv_10.42.42.10(pid=19150): Launched 12:15:52.475376 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:15:52.602352 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:15:52.920734 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19151): Launched 12:15:53.184299 run iperf3-srv_10.42.42.10(pid=19152): Launched 12:15:53.370386 tst cs_paging_gprs_active.py:38: start network... 12:15:53.497321 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:15:53.989350 run create_hlr_db(pid=19153): Launched 12:15:54.166253 bus /gobi_6: Setting Powered False 12:15:55.188017 run create_hlr_db(pid=19153): Terminated: ok {rc=0} 12:15:55.625652 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19155): Launched 12:15:55.953431 run osmo-hlr_10.42.42.2(pid=19156): Launched 12:15:56.074874 run osmo-stp_10.42.42.5: Starting osmo-stp 12:15:56.647061 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19158): Launched 12:15:56.976142 run osmo-stp_10.42.42.5(pid=19159): Launched 12:15:57.094973 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:15:57.669852 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19161): Launched 12:15:57.787370 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:15:58.076569 run patchelf(pid=19162): Launched 12:15:58.269175 run osmo-stp_10.42.42.5(pid=19159): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19159)] 12:15:58.410531 run osmo-stp_10.42.42.5(pid=19159): stdout: | (launched: 2022-12-13_12:15:56.813740) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:15:58.551999 run osmo-stp_10.42.42.5(pid=19159): stderr: | �[0;m�[38;5;43m20221213121557003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213121557003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213121557004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213121557004 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213121557004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213121557005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213121557005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:15:58.687797 run osmo-stp_10.42.42.5(pid=19159): stdout: | (launched: 2022-12-13_12:15:56.813740) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:15:58.823025 run osmo-stp_10.42.42.5(pid=19159): stderr: | �[0;m�[38;5;43m20221213121557003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213121557003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213121557004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213121557004 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213121557004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213121557005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213121557005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:15:58.980476 run patchelf(pid=19162): Terminating (SIGINT) 12:15:59.165118 run patchelf(pid=19162): Terminated: ok {rc=0} 12:15:59.198914 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19159): Process ended prematurely: osmo-stp_10.42.42.5(pid=19159) [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19159)] [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 12:15:59.208936 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 12:15:59.272867 run osmo-hlr_10.42.42.2(pid=19156): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19156)] 12:15:59.324734 run osmo-hlr_10.42.42.2(pid=19156): stdout: | (launched: 2022-12-13_12:15:55.793204) 12:15:59.377362 run osmo-hlr_10.42.42.2(pid=19156): stderr: | �[0;m�[1;31m20221213121555990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213121555990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213121555990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213121555990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213121555990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213121555990 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213121556003 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213121556013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213121556013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213121556013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:15:59.422287 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19149): Terminating (SIGTERM) 12:15:59.464660 run iperf3-srv_10.42.42.10(pid=19150): Terminating (SIGTERM) 12:15:59.508425 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19151): Terminating (SIGTERM) 12:15:59.550895 run iperf3-srv_10.42.42.10(pid=19152): Terminating (SIGTERM) 12:15:59.592883 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19155): Terminating (SIGTERM) 12:15:59.635336 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19158): Terminating (SIGTERM) 12:15:59.677397 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19161): Terminating (SIGTERM) 12:15:59.686937 --- ParallelTerminationStrategy: PID 19149 died... 12:15:59.743501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19149): Terminated: ok {rc=0} 12:15:59.753507 --- ParallelTerminationStrategy: PID 19150 died... 12:15:59.809677 run iperf3-srv_10.42.42.10(pid=19150): Terminated {rc=256} 12:15:59.819604 --- ParallelTerminationStrategy: PID 19151 died... 12:15:59.875811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19151): Terminated: ok {rc=0} 12:15:59.885826 --- ParallelTerminationStrategy: PID 19152 died... 12:15:59.941979 run iperf3-srv_10.42.42.10(pid=19152): Terminated {rc=256} 12:15:59.951918 --- ParallelTerminationStrategy: PID 19155 died... 12:16:00.008060 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19155): Terminated: ok {rc=0} 12:16:00.018007 --- ParallelTerminationStrategy: PID 19158 died... 12:16:00.074353 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19158): Terminated: ok {rc=0} 12:16:00.084281 --- ParallelTerminationStrategy: PID 19161 died... 12:16:00.140541 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19161): Terminated: ok {rc=0} 12:16:00.228499 bus /gobi_0: Setting Powered False 12:16:01.346037 bus /gobi_0: Setting Powered False 12:16:02.456298 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19159): Process ended prematurely: osmo-stp_10.42.42.5(pid=19159) [trial-2389↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19159)]