Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=25374): Process ended prematurely: osmo-stp_10.42.42.5(pid=25374) [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25374)]
Standard Output
---------------------------------------------- trial-2390 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:17:57.717991 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:17:57.728622 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:17:57.874388 tst cs_paging_gprs_active.py: using LAC 34202 13:17:57.993069 tst cs_paging_gprs_active.py: using RAC 32 13:17:58.113551 tst cs_paging_gprs_active.py: using CellId 34202 13:17:58.242957 tst cs_paging_gprs_active.py: using BVCI 34203 13:17:58.268399 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:17:58.279944 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:17:58.291303 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:17:58.302675 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:17:58.314484 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:17:58.326013 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:17:58.337739 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:17:58.349297 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:17:58.360868 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:17:58.479363 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:17:58.774345 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:17:58.911997 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:17:59.251678 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25364): Launched 13:17:59.534026 run iperf3-srv_10.42.42.10(pid=25365): Launched 13:17:59.735268 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:17:59.872065 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:18:00.212644 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25366): Launched 13:18:00.495960 run iperf3-srv_10.42.42.10(pid=25367): Launched 13:18:00.697076 tst cs_paging_gprs_active.py:38: start network... 13:18:00.835174 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:18:01.400011 run create_hlr_db(pid=25368): Launched 13:18:01.593830 bus /gobi_6: Setting Powered False 13:18:02.611050 run create_hlr_db(pid=25368): Terminated: ok {rc=0} 13:18:03.023667 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25370): Launched 13:18:03.329644 run osmo-hlr_10.42.42.2(pid=25371): Launched 13:18:03.451624 run osmo-stp_10.42.42.5: Starting osmo-stp 13:18:03.987892 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25373): Launched 13:18:04.292313 run osmo-stp_10.42.42.5(pid=25374): Launched 13:18:04.402128 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:18:04.936166 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25376): Launched 13:18:05.045770 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:18:05.314200 run patchelf(pid=25377): Launched 13:18:05.493160 run osmo-stp_10.42.42.5(pid=25374): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25374)] 13:18:05.624480 run osmo-stp_10.42.42.5(pid=25374): stdout: | (launched: 2022-12-13_13:18:04.142672) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:18:05.756058 run osmo-stp_10.42.42.5(pid=25374): stderr: | �[0;m�[38;5;43m20221213131804312 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131804312 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131804313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131804314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131804314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131804314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131804314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:18:05.882310 run osmo-stp_10.42.42.5(pid=25374): stdout: | (launched: 2022-12-13_13:18:04.142672) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:18:06.007748 run osmo-stp_10.42.42.5(pid=25374): stderr: | �[0;m�[38;5;43m20221213131804312 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131804312 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131804313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131804314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131804314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131804314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131804314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:18:06.153827 run patchelf(pid=25377): Terminating (SIGINT) 13:18:06.324837 run patchelf(pid=25377): Terminated: ok {rc=0} 13:18:06.356386 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25374): Process ended prematurely: osmo-stp_10.42.42.5(pid=25374) [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25374)] [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:18:06.365593 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:18:06.424838 run osmo-hlr_10.42.42.2(pid=25371): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25371)] 13:18:06.473342 run osmo-hlr_10.42.42.2(pid=25371): stdout: | (launched: 2022-12-13_13:18:03.179551) 13:18:06.522523 run osmo-hlr_10.42.42.2(pid=25371): stderr: | �[0;m�[1;31m20221213131803356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213131803356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213131803356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213131803356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213131803357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213131803357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213131803369 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213131803378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213131803379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213131803379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:18:06.564566 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25364): Terminating (SIGTERM) 13:18:06.604139 run iperf3-srv_10.42.42.10(pid=25365): Terminating (SIGTERM) 13:18:06.643694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25366): Terminating (SIGTERM) 13:18:06.683175 run iperf3-srv_10.42.42.10(pid=25367): Terminating (SIGTERM) 13:18:06.722799 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25370): Terminating (SIGTERM) 13:18:06.762365 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25373): Terminating (SIGTERM) 13:18:06.801995 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25376): Terminating (SIGTERM) 13:18:06.811011 --- ParallelTerminationStrategy: PID 25364 died... 13:18:06.864012 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25364): Terminated: ok {rc=0} 13:18:06.873434 --- ParallelTerminationStrategy: PID 25365 died... 13:18:06.926077 run iperf3-srv_10.42.42.10(pid=25365): Terminated {rc=256} 13:18:06.935389 --- ParallelTerminationStrategy: PID 25366 died... 13:18:06.987649 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25366): Terminated: ok {rc=0} 13:18:06.997053 --- ParallelTerminationStrategy: PID 25367 died... 13:18:07.049333 run iperf3-srv_10.42.42.10(pid=25367): Terminated {rc=256} 13:18:07.058685 --- ParallelTerminationStrategy: PID 25370 died... 13:18:07.111040 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25370): Terminated: ok {rc=0} 13:18:07.120449 --- ParallelTerminationStrategy: PID 25373 died... 13:18:07.172873 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25373): Terminated: ok {rc=0} 13:18:07.182356 --- ParallelTerminationStrategy: PID 25376 died... 13:18:07.234811 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25376): Terminated: ok {rc=0} 13:18:07.318902 bus /gobi_0: Setting Powered False 13:18:08.424909 bus /gobi_0: Setting Powered False 13:18:09.533759 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25374): Process ended prematurely: osmo-stp_10.42.42.5(pid=25374) [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25374)]