Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=26182): Process ended prematurely: osmo-stp_10.42.42.5(pid=26182) [trial-2390↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26182)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:25:37.164913 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:25:37.176276 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:25:37.344762 tst cs_paging_gprs_active.py: using LAC 34243 13:25:37.473967 tst cs_paging_gprs_active.py: using RAC 73 13:25:37.604691 tst cs_paging_gprs_active.py: using CellId 34243 13:25:37.733222 tst cs_paging_gprs_active.py: using BVCI 34244 13:25:37.758515 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:25:37.769910 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:25:37.781105 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:25:37.792245 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:25:37.804452 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:25:37.816453 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:25:37.828635 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:25:37.840498 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:25:37.852794 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:25:37.973729 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:25:38.273679 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:25:38.412185 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:25:38.754079 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26172): Launched 13:25:39.040520 run iperf3-srv_10.42.42.10(pid=26173): Launched 13:25:39.242725 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:25:39.380923 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:25:39.722509 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26174): Launched 13:25:40.007627 run iperf3-srv_10.42.42.10(pid=26175): Launched 13:25:40.209129 tst cs_paging_gprs_active.py:38: start network... 13:25:40.346795 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:25:40.865613 run create_hlr_db(pid=26176): Launched 13:25:41.055054 bus /gobi_6: Setting Powered False 13:25:42.077388 run create_hlr_db(pid=26176): Terminated: ok {rc=0} 13:25:42.516040 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26178): Launched 13:25:42.848275 run osmo-hlr_10.42.42.2(pid=26179): Launched 13:25:42.971999 run osmo-stp_10.42.42.5: Starting osmo-stp 13:25:43.545699 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26181): Launched 13:25:43.878216 run osmo-stp_10.42.42.5(pid=26182): Launched 13:25:43.997794 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:25:44.572188 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26184): Launched 13:25:44.689692 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:25:44.979139 run patchelf(pid=26185): Launched 13:25:45.171378 run osmo-stp_10.42.42.5(pid=26182): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26182)] 13:25:45.311855 run osmo-stp_10.42.42.5(pid=26182): stdout: | (launched: 2022-12-13_13:25:43.713656) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:25:45.452333 run osmo-stp_10.42.42.5(pid=26182): stderr: | �[0;m�[38;5;43m20221213132543904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213132543904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213132543904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213132543905 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213132543905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213132543905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213132543905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:25:45.588000 run osmo-stp_10.42.42.5(pid=26182): stdout: | (launched: 2022-12-13_13:25:43.713656) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:25:45.723099 run osmo-stp_10.42.42.5(pid=26182): stderr: | �[0;m�[38;5;43m20221213132543904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213132543904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213132543904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213132543905 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213132543905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213132543905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213132543905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:25:45.887116 run patchelf(pid=26185): Terminating (SIGINT) 13:25:46.074133 run patchelf(pid=26185): Terminated: ok {rc=0} 13:25:46.109055 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26182): Process ended prematurely: osmo-stp_10.42.42.5(pid=26182) [trial-2390↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26182)] [trial-2390↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:25:46.119824 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 13:25:46.184233 run osmo-hlr_10.42.42.2(pid=26179): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26179)] 13:25:46.236996 run osmo-hlr_10.42.42.2(pid=26179): stdout: | (launched: 2022-12-13_13:25:42.683811) 13:25:46.290413 run osmo-hlr_10.42.42.2(pid=26179): stderr: | �[0;m�[1;31m20221213132542882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213132542882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213132542882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213132542882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213132542882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213132542883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213132542895 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213132542904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213132542904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213132542904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:25:46.336931 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26172): Terminating (SIGTERM) 13:25:46.380216 run iperf3-srv_10.42.42.10(pid=26173): Terminating (SIGTERM) 13:25:46.425045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26174): Terminating (SIGTERM) 13:25:46.469111 run iperf3-srv_10.42.42.10(pid=26175): Terminating (SIGTERM) 13:25:46.513694 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26178): Terminating (SIGTERM) 13:25:46.556785 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26181): Terminating (SIGTERM) 13:25:46.599912 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26184): Terminating (SIGTERM) 13:25:46.609784 --- ParallelTerminationStrategy: PID 26172 died... 13:25:46.667609 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26172): Terminated: ok {rc=0} 13:25:46.678175 --- ParallelTerminationStrategy: PID 26173 died... 13:25:46.735403 run iperf3-srv_10.42.42.10(pid=26173): Terminated {rc=256} 13:25:46.746003 --- ParallelTerminationStrategy: PID 26174 died... 13:25:46.803829 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26174): Terminated: ok {rc=0} 13:25:46.814404 --- ParallelTerminationStrategy: PID 26175 died... 13:25:46.871628 run iperf3-srv_10.42.42.10(pid=26175): Terminated {rc=256} 13:25:46.882085 --- ParallelTerminationStrategy: PID 26178 died... 13:25:46.939299 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26178): Terminated: ok {rc=0} 13:25:46.949875 --- ParallelTerminationStrategy: PID 26181 died... 13:25:47.007043 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26181): Terminated: ok {rc=0} 13:25:47.017600 --- ParallelTerminationStrategy: PID 26184 died... 13:25:47.074470 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26184): Terminated: ok {rc=0} 13:25:47.164237 bus /gobi_0: Setting Powered False 13:25:48.269330 bus /gobi_0: Setting Powered False 13:25:49.379656 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26182): Process ended prematurely: osmo-stp_10.42.42.5(pid=26182) [trial-2390↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26182)]