Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=26348): Process ended prematurely: osmo-stp_10.42.42.5(pid=26348) [trial-2390↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26348)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 13:27:38.084884 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:27:38.096414 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 13:27:38.240229 tst cs_paging_gprs_active.py: using LAC 34253 13:27:38.364125 tst cs_paging_gprs_active.py: using RAC 83 13:27:38.487817 tst cs_paging_gprs_active.py: using CellId 34253 13:27:38.611812 tst cs_paging_gprs_active.py: using BVCI 34254 13:27:38.635572 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:27:38.646976 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:27:38.658084 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:27:38.669217 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:27:38.680794 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:27:38.692380 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:27:38.704124 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:27:38.715634 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:27:38.727390 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:27:38.850543 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:27:39.136018 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:27:39.265251 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:27:39.586305 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26338): Launched 13:27:39.855618 run iperf3-srv_10.42.42.10(pid=26339): Launched 13:27:40.044299 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:27:40.172920 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:27:40.493899 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26340): Launched 13:27:40.760615 run iperf3-srv_10.42.42.10(pid=26341): Launched 13:27:40.948613 tst cs_paging_gprs_active.py:38: start network... 13:27:41.077454 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:27:41.571391 run create_hlr_db(pid=26342): Launched 13:27:41.747774 bus /gobi_6: Setting Powered False 13:27:42.769399 run create_hlr_db(pid=26342): Terminated: ok {rc=0} 13:27:43.206960 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26344): Launched 13:27:43.538660 run osmo-hlr_10.42.42.2(pid=26345): Launched 13:27:43.660796 run osmo-stp_10.42.42.5: Starting osmo-stp 13:27:44.235774 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26347): Launched 13:27:44.566898 run osmo-stp_10.42.42.5(pid=26348): Launched 13:27:44.687031 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:27:45.262957 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26350): Launched 13:27:45.380759 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:27:45.668577 run patchelf(pid=26351): Launched 13:27:45.866608 run osmo-stp_10.42.42.5(pid=26348): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26348)] 13:27:46.022219 run osmo-stp_10.42.42.5(pid=26348): stdout: | (launched: 2022-12-13_13:27:44.403237) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:46.160447 run osmo-stp_10.42.42.5(pid=26348): stderr: | �[0;m�[38;5;43m20221213132744595 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213132744595 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213132744595 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213132744596 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213132744596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213132744596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213132744596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:46.293827 run osmo-stp_10.42.42.5(pid=26348): stdout: | (launched: 2022-12-13_13:27:44.403237) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:46.426492 run osmo-stp_10.42.42.5(pid=26348): stderr: | �[0;m�[38;5;43m20221213132744595 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213132744595 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213132744595 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213132744596 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213132744596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213132744596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213132744596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:46.581894 run patchelf(pid=26351): Terminating (SIGINT) 13:27:46.763860 run patchelf(pid=26351): Terminated: ok {rc=0} 13:27:46.797602 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26348): Process ended prematurely: osmo-stp_10.42.42.5(pid=26348) [trial-2390↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26348)] [trial-2390↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 13:27:46.808120 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:27:46.871995 run osmo-hlr_10.42.42.2(pid=26345): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26345)] 13:27:46.924611 run osmo-hlr_10.42.42.2(pid=26345): stdout: | (launched: 2022-12-13_13:27:43.374231) 13:27:46.978144 run osmo-hlr_10.42.42.2(pid=26345): stderr: | �[0;m�[1;31m20221213132743570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213132743570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213132743570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213132743570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213132743570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213132743570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213132743582 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213132743591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213132743591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213132743591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:27:47.025238 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26338): Terminating (SIGTERM) 13:27:47.069670 run iperf3-srv_10.42.42.10(pid=26339): Terminating (SIGTERM) 13:27:47.113758 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26340): Terminating (SIGTERM) 13:27:47.156738 run iperf3-srv_10.42.42.10(pid=26341): Terminating (SIGTERM) 13:27:47.202744 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26344): Terminating (SIGTERM) 13:27:47.244638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26347): Terminating (SIGTERM) 13:27:47.286577 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26350): Terminating (SIGTERM) 13:27:47.295762 --- ParallelTerminationStrategy: PID 26338 died... 13:27:47.351903 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26338): Terminated: ok {rc=0} 13:27:47.361931 --- ParallelTerminationStrategy: PID 26339 died... 13:27:47.417643 run iperf3-srv_10.42.42.10(pid=26339): Terminated {rc=256} 13:27:47.427583 --- ParallelTerminationStrategy: PID 26340 died... 13:27:47.483673 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26340): Terminated: ok {rc=0} 13:27:47.493822 --- ParallelTerminationStrategy: PID 26341 died... 13:27:47.549666 run iperf3-srv_10.42.42.10(pid=26341): Terminated {rc=256} 13:27:47.559561 --- ParallelTerminationStrategy: PID 26344 died... 13:27:47.615720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26344): Terminated: ok {rc=0} 13:27:47.625726 --- ParallelTerminationStrategy: PID 26347 died... 13:27:47.681853 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26347): Terminated: ok {rc=0} 13:27:47.691785 --- ParallelTerminationStrategy: PID 26350 died... 13:27:47.748030 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26350): Terminated: ok {rc=0} 13:27:47.835067 bus /gobi_0: Setting Powered False 13:27:48.940922 bus /gobi_0: Setting Powered False 13:27:50.049331 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26348): Process ended prematurely: osmo-stp_10.42.42.5(pid=26348) [trial-2390↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26348)]