Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27095): Process ended prematurely: osmo-stp_10.42.42.5(pid=27095) [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27095)]
Standard Output
---------------------------------------------- trial-2379 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 16:15:09.149180 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:15:09.160180 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:15:09.306996 tst cs_paging_gprs_active.py: using LAC 30011 16:15:09.430790 tst cs_paging_gprs_active.py: using RAC 176 16:15:09.556669 tst cs_paging_gprs_active.py: using CellId 30011 16:15:09.676707 tst cs_paging_gprs_active.py: using BVCI 30012 16:15:09.700503 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:15:09.711498 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:15:09.722255 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:15:09.732999 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:15:09.743629 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:15:09.754336 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:15:09.765150 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:15:09.775694 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:15:09.786516 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:15:09.909553 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:15:10.192103 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:15:10.321777 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:15:10.646314 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27085): Launched 16:15:10.916683 run iperf3-srv_10.42.42.10(pid=27086): Launched 16:15:11.105509 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:15:11.234163 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:15:11.558766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27087): Launched 16:15:11.829731 run iperf3-srv_10.42.42.10(pid=27088): Launched 16:15:12.018291 tst cs_paging_gprs_active.py:38: start network... 16:15:12.146975 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:15:12.645886 run create_hlr_db(pid=27089): Launched 16:15:12.823801 bus /gobi_6: Setting Powered False 16:15:13.845023 run create_hlr_db(pid=27089): Terminated: ok {rc=0} 16:15:14.286764 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27091): Launched 16:15:14.624427 run osmo-hlr_10.42.42.2(pid=27092): Launched 16:15:14.750633 run osmo-stp_10.42.42.5: Starting osmo-stp 16:15:15.328629 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27094): Launched 16:15:15.664724 run osmo-stp_10.42.42.5(pid=27095): Launched 16:15:15.814254 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:15:16.418485 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27097): Launched 16:15:16.541210 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:15:16.848848 run patchelf(pid=27098): Launched 16:15:17.048305 run osmo-stp_10.42.42.5(pid=27095): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27095)] 16:15:17.194005 run osmo-stp_10.42.42.5(pid=27095): stdout: | (launched: 2022-12-12_16:15:15.497806) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:15:17.337050 run osmo-stp_10.42.42.5(pid=27095): stderr: | �[0;m�[38;5;43m20221212161515688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212161515688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212161515688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212161515689 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212161515689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212161515690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212161515690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:15:17.475043 run osmo-stp_10.42.42.5(pid=27095): stdout: | (launched: 2022-12-12_16:15:15.497806) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:15:17.612219 run osmo-stp_10.42.42.5(pid=27095): stderr: | �[0;m�[38;5;43m20221212161515688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212161515688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212161515688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212161515689 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212161515689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212161515690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212161515690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:15:17.770735 run patchelf(pid=27098): Terminating (SIGINT) 16:15:17.956470 run patchelf(pid=27098): Terminated: ok {rc=0} 16:15:17.990949 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27095): Process ended prematurely: osmo-stp_10.42.42.5(pid=27095) [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27095)] [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 16:15:18.001137 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 16:15:18.065493 run osmo-hlr_10.42.42.2(pid=27092): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27092)] 16:15:18.117353 run osmo-hlr_10.42.42.2(pid=27092): stdout: | (launched: 2022-12-12_16:15:14.456485) 16:15:18.169910 run osmo-hlr_10.42.42.2(pid=27092): stderr: | �[0;m�[1;31m20221212161514654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212161514654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212161514654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212161514654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212161514654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212161514654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212161514666 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212161514674 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212161514675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212161514675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:15:18.214544 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27085): Terminating (SIGTERM) 16:15:18.256708 run iperf3-srv_10.42.42.10(pid=27086): Terminating (SIGTERM) 16:15:18.298953 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27087): Terminating (SIGTERM) 16:15:18.341339 run iperf3-srv_10.42.42.10(pid=27088): Terminating (SIGTERM) 16:15:18.383720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27091): Terminating (SIGTERM) 16:15:18.425604 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27094): Terminating (SIGTERM) 16:15:18.467795 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27097): Terminating (SIGTERM) 16:15:18.477899 --- ParallelTerminationStrategy: PID 27085 died... 16:15:18.534198 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27085): Terminated: ok {rc=0} 16:15:18.544596 --- ParallelTerminationStrategy: PID 27086 died... 16:15:18.600543 run iperf3-srv_10.42.42.10(pid=27086): Terminated {rc=256} 16:15:18.610872 --- ParallelTerminationStrategy: PID 27087 died... 16:15:18.667147 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27087): Terminated: ok {rc=0} 16:15:18.677353 --- ParallelTerminationStrategy: PID 27088 died... 16:15:18.733186 run iperf3-srv_10.42.42.10(pid=27088): Terminated {rc=256} 16:15:18.743468 --- ParallelTerminationStrategy: PID 27091 died... 16:15:18.799485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27091): Terminated: ok {rc=0} 16:15:18.809908 --- ParallelTerminationStrategy: PID 27094 died... 16:15:18.866183 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27094): Terminated: ok {rc=0} 16:15:18.876231 --- ParallelTerminationStrategy: PID 27097 died... 16:15:18.932486 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27097): Terminated: ok {rc=0} 16:15:19.018940 bus /gobi_0: Setting Powered False 16:15:20.126340 bus /gobi_0: Setting Powered False 16:15:21.233199 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27095): Process ended prematurely: osmo-stp_10.42.42.5(pid=27095) [trial-2379↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27095)]