Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=29401): Process ended prematurely: osmo-stp_10.42.42.5(pid=29401) [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29401)]
Standard Output
---------------------------------------------- trial-2379 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 16:40:40.235887 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:40:40.247666 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:40:40.406806 tst ping_idle_ping.py: using LAC 30145 16:40:40.528316 tst ping_idle_ping.py: using RAC 55 16:40:40.657976 tst ping_idle_ping.py: using CellId 30145 16:40:40.786046 tst ping_idle_ping.py: using BVCI 30146 16:40:40.811461 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:40:40.823129 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:40:40.834929 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:40:40.847085 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:40:40.859104 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:40:40.870887 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:40:40.882704 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:40:40.894379 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:40:41.173178 tst ping_idle_ping.py:24: start network... 16:40:41.299356 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:40:41.797609 run create_hlr_db(pid=29395): Launched 16:40:41.973869 bus /gobi_6: Setting Powered False 16:40:42.993798 run create_hlr_db(pid=29395): Terminated: ok {rc=0} 16:40:43.427336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29397): Launched 16:40:43.756306 run osmo-hlr_10.42.42.2(pid=29398): Launched 16:40:43.878174 run osmo-stp_10.42.42.5: Starting osmo-stp 16:40:44.444335 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29400): Launched 16:40:44.771380 run osmo-stp_10.42.42.5(pid=29401): Launched 16:40:44.890257 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:40:45.460033 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29403): Launched 16:40:45.576255 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:40:45.870708 run patchelf(pid=29404): Launched 16:40:46.064550 run osmo-stp_10.42.42.5(pid=29401): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29401)] 16:40:46.206981 run osmo-stp_10.42.42.5(pid=29401): stdout: | (launched: 2022-12-12_16:40:44.609507) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:40:46.350544 run osmo-stp_10.42.42.5(pid=29401): stderr: | �[0;m�[38;5;43m20221212164044800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212164044800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212164044800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212164044801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212164044801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212164044801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212164044801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:40:46.489049 run osmo-stp_10.42.42.5(pid=29401): stdout: | (launched: 2022-12-12_16:40:44.609507) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:40:46.626018 run osmo-stp_10.42.42.5(pid=29401): stderr: | �[0;m�[38;5;43m20221212164044800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212164044800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212164044800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212164044801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212164044801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212164044801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212164044801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:40:46.785468 run patchelf(pid=29404): Terminating (SIGINT) 16:40:46.971016 run patchelf(pid=29404): Terminated: ok {rc=0} 16:40:47.005565 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=29401): Process ended prematurely: osmo-stp_10.42.42.5(pid=29401) [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29401)] [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 16:40:47.016137 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 16:40:47.082420 run osmo-hlr_10.42.42.2(pid=29398): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29398)] 16:40:47.136027 run osmo-hlr_10.42.42.2(pid=29398): stdout: | (launched: 2022-12-12_16:40:43.593439) 16:40:47.189212 run osmo-hlr_10.42.42.2(pid=29398): stderr: | �[0;m�[1;31m20221212164043791 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212164043791 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212164043791 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212164043791 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212164043791 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212164043791 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212164043804 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212164043814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212164043814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212164043814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:40:47.233704 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29397): Terminating (SIGTERM) 16:40:47.276193 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29400): Terminating (SIGTERM) 16:40:47.318620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29403): Terminating (SIGTERM) 16:40:47.328627 --- ParallelTerminationStrategy: PID 29397 died... 16:40:47.385255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29397): Terminated: ok {rc=0} 16:40:47.395302 --- ParallelTerminationStrategy: PID 29400 died... 16:40:47.451822 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29400): Terminated: ok {rc=0} 16:40:47.461896 --- ParallelTerminationStrategy: PID 29403 died... 16:40:47.518568 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29403): Terminated: ok {rc=0} 16:40:47.606942 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29401): Process ended prematurely: osmo-stp_10.42.42.5(pid=29401) [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29401)]