Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=30067): Process ended prematurely: osmo-stp_10.42.42.5(pid=30067) [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30067)]
Standard Output
---------------------------------------------- trial-2379 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 16:50:09.144331 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:50:09.156009 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:50:09.304058 tst cs_paging_gprs_active.py: using LAC 30195 16:50:09.430667 tst cs_paging_gprs_active.py: using RAC 105 16:50:09.548628 tst cs_paging_gprs_active.py: using CellId 30195 16:50:09.667729 tst cs_paging_gprs_active.py: using BVCI 30196 16:50:09.691114 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:50:09.702471 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:50:09.713729 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:50:09.725013 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:50:09.735969 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:50:09.747193 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:50:09.758434 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:50:09.769572 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:50:09.781004 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:50:09.900553 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:50:10.196312 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:50:10.332492 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:50:10.671613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30057): Launched 16:50:10.951575 run iperf3-srv_10.42.42.10(pid=30058): Launched 16:50:11.151393 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:50:11.287162 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:50:11.623905 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30059): Launched 16:50:11.904122 run iperf3-srv_10.42.42.10(pid=30060): Launched 16:50:12.104052 tst cs_paging_gprs_active.py:38: start network... 16:50:12.239646 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:50:12.754769 run create_hlr_db(pid=30061): Launched 16:50:12.942853 bus /gobi_6: Setting Powered False 16:50:13.964884 run create_hlr_db(pid=30061): Terminated: ok {rc=0} 16:50:14.382191 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30063): Launched 16:50:14.710132 run osmo-hlr_10.42.42.2(pid=30064): Launched 16:50:14.828858 run osmo-stp_10.42.42.5: Starting osmo-stp 16:50:15.396089 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30066): Launched 16:50:15.724336 run osmo-stp_10.42.42.5(pid=30067): Launched 16:50:15.909092 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:50:16.560388 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30069): Launched 16:50:16.680184 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:50:16.980903 run patchelf(pid=30070): Launched 16:50:17.176031 run osmo-stp_10.42.42.5(pid=30067): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30067)] 16:50:17.315191 run osmo-stp_10.42.42.5(pid=30067): stdout: | (launched: 2022-12-12_16:50:15.561590) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:50:17.454971 run osmo-stp_10.42.42.5(pid=30067): stderr: | �[0;m�[38;5;43m20221212165015752 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212165015752 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212165015752 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212165015753 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212165015753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212165015753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212165015753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:50:17.589912 run osmo-stp_10.42.42.5(pid=30067): stdout: | (launched: 2022-12-12_16:50:15.561590) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:50:17.723297 run osmo-stp_10.42.42.5(pid=30067): stderr: | �[0;m�[38;5;43m20221212165015752 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212165015752 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212165015752 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212165015753 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212165015753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212165015753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212165015753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:50:17.878011 run patchelf(pid=30070): Terminating (SIGINT) 16:50:18.059716 run patchelf(pid=30070): Terminated: ok {rc=0} 16:50:18.093486 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30067): Process ended prematurely: osmo-stp_10.42.42.5(pid=30067) [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30067)] [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 16:50:18.103616 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 16:50:18.167681 run osmo-hlr_10.42.42.2(pid=30064): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30064)] 16:50:18.219587 run osmo-hlr_10.42.42.2(pid=30064): stdout: | (launched: 2022-12-12_16:50:14.548063) 16:50:18.272617 run osmo-hlr_10.42.42.2(pid=30064): stderr: | �[0;m�[1;31m20221212165014743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212165014744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212165014744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212165014744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212165014744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212165014744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212165014756 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212165014764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212165014765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212165014765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:50:18.317479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30057): Terminating (SIGTERM) 16:50:18.359917 run iperf3-srv_10.42.42.10(pid=30058): Terminating (SIGTERM) 16:50:18.402390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30059): Terminating (SIGTERM) 16:50:18.444699 run iperf3-srv_10.42.42.10(pid=30060): Terminating (SIGTERM) 16:50:18.487113 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30063): Terminating (SIGTERM) 16:50:18.529638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30066): Terminating (SIGTERM) 16:50:18.571954 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30069): Terminating (SIGTERM) 16:50:18.581711 --- ParallelTerminationStrategy: PID 30057 died... 16:50:18.637908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30057): Terminated: ok {rc=0} 16:50:18.648263 --- ParallelTerminationStrategy: PID 30058 died... 16:50:18.704580 run iperf3-srv_10.42.42.10(pid=30058): Terminated {rc=256} 16:50:18.714882 --- ParallelTerminationStrategy: PID 30059 died... 16:50:18.770688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30059): Terminated: ok {rc=0} 16:50:18.780879 --- ParallelTerminationStrategy: PID 30060 died... 16:50:18.837124 run iperf3-srv_10.42.42.10(pid=30060): Terminated {rc=256} 16:50:18.847116 --- ParallelTerminationStrategy: PID 30063 died... 16:50:18.904029 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30063): Terminated: ok {rc=0} 16:50:18.914257 --- ParallelTerminationStrategy: PID 30066 died... 16:50:18.970611 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30066): Terminated: ok {rc=0} 16:50:18.980778 --- ParallelTerminationStrategy: PID 30069 died... 16:50:19.037761 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30069): Terminated: ok {rc=0} 16:50:19.125401 bus /gobi_0: Setting Powered False 16:50:20.233006 bus /gobi_0: Setting Powered False 16:50:21.341064 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30067): Process ended prematurely: osmo-stp_10.42.42.5(pid=30067) [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30067)]