Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18101): Process ended prematurely: osmo-stp_10.42.42.5(pid=18101) [trial-2381↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18101)]
Standard Output
---------------------------------------------- trial-2381 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:17:56.428891 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:17:56.440037 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:17:56.586276 tst cs_paging_gprs_active.py: using LAC 30933 19:17:56.707446 tst cs_paging_gprs_active.py: using RAC 78 19:17:56.828645 tst cs_paging_gprs_active.py: using CellId 30933 19:17:56.949754 tst cs_paging_gprs_active.py: using BVCI 30934 19:17:56.973200 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:17:56.983942 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:17:56.994636 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:17:57.005347 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:17:57.015899 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:17:57.026568 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:17:57.037351 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:17:57.047815 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:17:57.058581 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:17:57.180585 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:17:57.463034 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:17:57.590827 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:17:57.908652 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18091): Launched 19:17:58.171408 run iperf3-srv_10.42.42.10(pid=18092): Launched 19:17:58.356853 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:17:58.483069 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:17:58.800752 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18093): Launched 19:17:59.063252 run iperf3-srv_10.42.42.10(pid=18094): Launched 19:17:59.248834 tst cs_paging_gprs_active.py:38: start network... 19:17:59.374940 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:17:59.863813 run create_hlr_db(pid=18095): Launched 19:18:00.039012 bus /gobi_6: Setting Powered False 19:18:01.098825 run create_hlr_db(pid=18095): Terminated: ok {rc=0} 19:18:01.607302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18097): Launched 19:18:02.034552 run osmo-hlr_10.42.42.2(pid=18098): Launched 19:18:02.246041 run osmo-stp_10.42.42.5: Starting osmo-stp 19:18:02.786254 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18100): Launched 19:18:03.091120 run osmo-stp_10.42.42.5(pid=18101): Launched 19:18:03.201253 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:18:03.734885 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18103): Launched 19:18:03.842989 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:18:04.110103 run patchelf(pid=18104): Launched 19:18:04.289544 run osmo-stp_10.42.42.5(pid=18101): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18101)] 19:18:04.420368 run osmo-stp_10.42.42.5(pid=18101): stdout: | (launched: 2022-12-12_19:18:02.940712) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:18:04.551422 run osmo-stp_10.42.42.5(pid=18101): stderr: | �[0;m�[38;5;43m20221212191803110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212191803110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212191803110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212191803111 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212191803112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212191803112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212191803112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:18:04.677296 run osmo-stp_10.42.42.5(pid=18101): stdout: | (launched: 2022-12-12_19:18:02.940712) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:18:04.802270 run osmo-stp_10.42.42.5(pid=18101): stderr: | �[0;m�[38;5;43m20221212191803110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212191803110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212191803110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212191803111 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212191803112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212191803112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212191803112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:18:04.947934 run patchelf(pid=18104): Terminating (SIGINT) 19:18:05.119491 run patchelf(pid=18104): Terminated: ok {rc=0} 19:18:05.150979 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18101): Process ended prematurely: osmo-stp_10.42.42.5(pid=18101) [trial-2381↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18101)] [trial-2381↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:18:05.160111 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 19:18:05.220727 run osmo-hlr_10.42.42.2(pid=18098): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18098)] 19:18:05.270113 run osmo-hlr_10.42.42.2(pid=18098): stdout: | (launched: 2022-12-12_19:18:01.778070) 19:18:05.320000 run osmo-hlr_10.42.42.2(pid=18098): stderr: | �[0;m�[1;31m20221212191802153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212191802153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212191802153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212191802153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212191802153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212191802153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212191802170 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212191802191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212191802191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212191802191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:18:05.362358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18091): Terminating (SIGTERM) 19:18:05.402567 run iperf3-srv_10.42.42.10(pid=18092): Terminating (SIGTERM) 19:18:05.442578 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18093): Terminating (SIGTERM) 19:18:05.482624 run iperf3-srv_10.42.42.10(pid=18094): Terminating (SIGTERM) 19:18:05.522611 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18097): Terminating (SIGTERM) 19:18:05.562505 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18100): Terminating (SIGTERM) 19:18:05.602349 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18103): Terminating (SIGTERM) 19:18:05.611586 --- ParallelTerminationStrategy: PID 18091 died... 19:18:05.665427 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18091): Terminated: ok {rc=0} 19:18:05.675532 --- ParallelTerminationStrategy: PID 18092 died... 19:18:05.728831 run iperf3-srv_10.42.42.10(pid=18092): Terminated {rc=256} 19:18:05.738343 --- ParallelTerminationStrategy: PID 18093 died... 19:18:05.791649 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18093): Terminated: ok {rc=0} 19:18:05.801453 --- ParallelTerminationStrategy: PID 18094 died... 19:18:05.854666 run iperf3-srv_10.42.42.10(pid=18094): Terminated {rc=256} 19:18:05.864196 --- ParallelTerminationStrategy: PID 18097 died... 19:18:05.917950 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18097): Terminated: ok {rc=0} 19:18:05.927589 --- ParallelTerminationStrategy: PID 18100 died... 19:18:05.980849 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18100): Terminated: ok {rc=0} 19:18:05.990533 --- ParallelTerminationStrategy: PID 18103 died... 19:18:06.044459 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18103): Terminated: ok {rc=0} 19:18:06.134206 bus /gobi_0: Setting Powered False 19:18:07.239757 bus /gobi_0: Setting Powered False 19:18:08.345809 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18101): Process ended prematurely: osmo-stp_10.42.42.5(pid=18101) [trial-2381↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18101)]