Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=11526): Process ended prematurely: osmo-stp_10.42.42.5(pid=11526) [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11526)]
Standard Output
---------------------------------------------- trial-2356 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 08:08:15.157701 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:08:15.171542 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:08:15.327163 tst iperf3.py: using LAC 20095 08:08:15.461727 tst iperf3.py: using RAC 205 08:08:15.597185 tst iperf3.py: using CellId 20095 08:08:15.731475 tst iperf3.py: using BVCI 20096 08:08:15.757967 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:08:15.771501 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:08:15.785549 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:08:15.799568 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:08:15.812991 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:08:15.826071 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:08:15.844670 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:08:15.857907 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:08:15.871293 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:08:16.203375 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 08:08:16.349327 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:08:16.710902 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11518): Launched 08:08:17.016247 run iperf3-srv_10.42.42.10(pid=11519): Launched 08:08:17.225460 tst iperf3.py:8: start network... 08:08:17.368602 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:08:17.991287 run create_hlr_db(pid=11520): Launched 08:08:18.209411 bus /gobi_6: Setting Powered False 08:08:19.223419 run create_hlr_db(pid=11520): Terminated: ok {rc=0} 08:08:19.691531 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11522): Launched 08:08:20.130299 run osmo-hlr_10.42.42.2(pid=11523): Launched 08:08:20.382825 run osmo-stp_10.42.42.5: Starting osmo-stp 08:08:20.989589 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11525): Launched 08:08:21.436922 run osmo-stp_10.42.42.5(pid=11526): Launched 08:08:21.650462 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:08:22.255908 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11528): Launched 08:08:22.380569 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:08:22.694930 run patchelf(pid=11529): Launched 08:08:22.895264 run osmo-stp_10.42.42.5(pid=11526): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11526)] 08:08:23.042085 run osmo-stp_10.42.42.5(pid=11526): stdout: | (launched: 2022-12-09_08:08:21.163506) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:08:23.189289 run osmo-stp_10.42.42.5(pid=11526): stderr: | �[0;m�[38;5;43m20221209080821452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209080821453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209080821453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209080821453 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209080821454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209080821454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209080821454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:08:23.331719 run osmo-stp_10.42.42.5(pid=11526): stdout: | (launched: 2022-12-09_08:08:21.163506) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:08:23.473991 run osmo-stp_10.42.42.5(pid=11526): stderr: | �[0;m�[38;5;43m20221209080821452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209080821453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209080821453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209080821453 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209080821454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209080821454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209080821454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:08:23.638704 run patchelf(pid=11529): Terminating (SIGINT) 08:08:23.830579 run patchelf(pid=11529): Terminated: ok {rc=0} 08:08:23.866326 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11526): Process ended prematurely: osmo-stp_10.42.42.5(pid=11526) [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11526)] [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 08:08:23.877752 tst iperf3.py:8: Test FAILED (8.8 sec) 08:08:23.944076 run osmo-hlr_10.42.42.2(pid=11523): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11523)] 08:08:24.000400 run osmo-hlr_10.42.42.2(pid=11523): stdout: | (launched: 2022-12-09_08:08:19.866782) 08:08:24.055241 run osmo-hlr_10.42.42.2(pid=11523): stderr: | �[0;m�[1;31m20221209080820175 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209080820175 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209080820175 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209080820175 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209080820175 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209080820175 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209080820195 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209080820203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209080820203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209080820203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:08:24.102428 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11518): Terminating (SIGTERM) 08:08:24.148648 run iperf3-srv_10.42.42.10(pid=11519): Terminating (SIGTERM) 08:08:24.195638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11522): Terminating (SIGTERM) 08:08:24.244349 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11525): Terminating (SIGTERM) 08:08:24.290712 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11528): Terminating (SIGTERM) 08:08:24.301906 --- ParallelTerminationStrategy: PID 11518 died... 08:08:24.362307 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11518): Terminated: ok {rc=0} 08:08:24.373274 --- ParallelTerminationStrategy: PID 11519 died... 08:08:24.437463 run iperf3-srv_10.42.42.10(pid=11519): Terminated {rc=256} 08:08:24.449120 --- ParallelTerminationStrategy: PID 11522 died... 08:08:24.510042 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11522): Terminated: ok {rc=0} 08:08:24.521448 --- ParallelTerminationStrategy: PID 11525 died... 08:08:24.583562 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11525): Terminated: ok {rc=0} 08:08:24.594636 --- ParallelTerminationStrategy: PID 11528 died... 08:08:24.653432 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11528): Terminated: ok {rc=0} 08:08:24.750517 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11526): Process ended prematurely: osmo-stp_10.42.42.5(pid=11526) [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11526)]