Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=4227): Process ended prematurely: osmo-stp_10.42.42.5(pid=4227) [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4227)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:47:19.497676 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:47:19.509569 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:47:19.675957 tst cs_paging_gprs_active.py: using LAC 32029 22:47:19.807736 tst cs_paging_gprs_active.py: using RAC 154 22:47:19.934999 tst cs_paging_gprs_active.py: using CellId 32029 22:47:20.062001 tst cs_paging_gprs_active.py: using BVCI 32030 22:47:20.087230 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:47:20.098581 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:47:20.109917 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:47:20.121101 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:47:20.132110 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:47:20.143379 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:47:20.154736 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:47:20.165856 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:47:20.177107 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:47:20.294896 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:47:20.578887 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:47:20.707544 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:47:21.026022 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4217): Launched 22:47:21.291077 run iperf3-srv_10.42.42.10(pid=4218): Launched 22:47:21.480736 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:47:21.609685 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:47:21.928467 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4219): Launched 22:47:22.192698 run iperf3-srv_10.42.42.10(pid=4220): Launched 22:47:22.380512 tst cs_paging_gprs_active.py:38: start network... 22:47:22.509103 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:47:22.994201 run create_hlr_db(pid=4221): Launched 22:47:23.172090 bus /gobi_6: Setting Powered False 22:47:24.192808 run create_hlr_db(pid=4221): Terminated: ok {rc=0} 22:47:24.601734 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4223): Launched 22:47:24.910604 run osmo-hlr_10.42.42.2(pid=4224): Launched 22:47:25.030961 run osmo-stp_10.42.42.5: Starting osmo-stp 22:47:25.571868 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4226): Launched 22:47:25.879483 run osmo-stp_10.42.42.5(pid=4227): Launched 22:47:25.991876 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:47:26.528403 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4229): Launched 22:47:26.638484 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:47:26.913384 run patchelf(pid=4230): Launched 22:47:27.093339 run osmo-stp_10.42.42.5(pid=4227): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4227)] 22:47:27.224707 run osmo-stp_10.42.42.5(pid=4227): stdout: | (launched: 2022-12-12_22:47:25.727917) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:47:27.356497 run osmo-stp_10.42.42.5(pid=4227): stderr: | �[0;m�[38;5;43m20221212224725898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224725898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224725898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224725899 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224725901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224725901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224725901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:47:27.484568 run osmo-stp_10.42.42.5(pid=4227): stdout: | (launched: 2022-12-12_22:47:25.727917) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:47:27.611232 run osmo-stp_10.42.42.5(pid=4227): stderr: | �[0;m�[38;5;43m20221212224725898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224725898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224725898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224725899 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224725901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224725901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224725901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:47:27.759150 run patchelf(pid=4230): Terminating (SIGINT) 22:47:27.933668 run patchelf(pid=4230): Terminated: ok {rc=0} 22:47:27.965361 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4227): Process ended prematurely: osmo-stp_10.42.42.5(pid=4227) [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4227)] [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:47:27.974511 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 22:47:28.034848 run osmo-hlr_10.42.42.2(pid=4224): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4224)] 22:47:28.083400 run osmo-hlr_10.42.42.2(pid=4224): stdout: | (launched: 2022-12-12_22:47:24.758126) 22:47:28.132555 run osmo-hlr_10.42.42.2(pid=4224): stderr: | �[0;m�[1;31m20221212224724936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212224724937 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212224724937 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212224724937 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212224724937 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212224724937 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212224724952 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212224724962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212224724962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212224724962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:47:28.174558 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4217): Terminating (SIGTERM) 22:47:28.214083 run iperf3-srv_10.42.42.10(pid=4218): Terminating (SIGTERM) 22:47:28.253700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4219): Terminating (SIGTERM) 22:47:28.293163 run iperf3-srv_10.42.42.10(pid=4220): Terminating (SIGTERM) 22:47:28.333054 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4223): Terminating (SIGTERM) 22:47:28.372705 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4226): Terminating (SIGTERM) 22:47:28.411933 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4229): Terminating (SIGTERM) 22:47:28.421520 --- ParallelTerminationStrategy: PID 4217 died... 22:47:28.474344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4217): Terminated: ok {rc=0} 22:47:28.484386 --- ParallelTerminationStrategy: PID 4218 died... 22:47:28.536899 run iperf3-srv_10.42.42.10(pid=4218): Terminated {rc=256} 22:47:28.546639 --- ParallelTerminationStrategy: PID 4219 died... 22:47:28.599197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4219): Terminated: ok {rc=0} 22:47:28.609136 --- ParallelTerminationStrategy: PID 4220 died... 22:47:28.661546 run iperf3-srv_10.42.42.10(pid=4220): Terminated {rc=256} 22:47:28.671237 --- ParallelTerminationStrategy: PID 4223 died... 22:47:28.723728 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4223): Terminated: ok {rc=0} 22:47:28.733969 --- ParallelTerminationStrategy: PID 4226 died... 22:47:28.786492 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4226): Terminated: ok {rc=0} 22:47:28.796217 --- ParallelTerminationStrategy: PID 4229 died... 22:47:28.849073 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4229): Terminated: ok {rc=0} 22:47:28.932243 bus /gobi_0: Setting Powered False 22:47:30.039485 bus /gobi_0: Setting Powered False 22:47:31.161812 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4227): Process ended prematurely: osmo-stp_10.42.42.5(pid=4227) [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4227)]