Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=28304): Process ended prematurely: osmo-stp_10.42.42.5(pid=28304) [trial-2390↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28304)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:51:44.638865 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:51:44.650322 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:51:44.816205 tst cs_paging_gprs_active.py: using LAC 34381 13:51:44.942637 tst cs_paging_gprs_active.py: using RAC 211 13:51:45.071199 tst cs_paging_gprs_active.py: using CellId 34381 13:51:45.199123 tst cs_paging_gprs_active.py: using BVCI 34382 13:51:45.224321 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:51:45.235643 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:51:45.246867 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:51:45.258115 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:51:45.269687 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:51:45.281545 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:51:45.293522 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:51:45.305271 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:51:45.317236 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:51:45.433987 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:51:45.730769 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:51:45.887662 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:51:46.240545 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28294): Launched 13:51:46.537960 run iperf3-srv_10.42.42.10(pid=28295): Launched 13:51:46.742428 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:51:46.882161 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:51:47.235380 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28296): Launched 13:51:47.515532 run iperf3-srv_10.42.42.10(pid=28297): Launched 13:51:47.714932 tst cs_paging_gprs_active.py:38: start network... 13:51:47.851130 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:51:48.365285 run create_hlr_db(pid=28298): Launched 13:51:48.552722 bus /gobi_6: Setting Powered False 13:51:49.574858 run create_hlr_db(pid=28298): Terminated: ok {rc=0} 13:51:50.008497 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28300): Launched 13:51:50.336353 run osmo-hlr_10.42.42.2(pid=28301): Launched 13:51:50.452268 run osmo-stp_10.42.42.5: Starting osmo-stp 13:51:51.017694 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28303): Launched 13:51:51.343988 run osmo-stp_10.42.42.5(pid=28304): Launched 13:51:51.461899 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:51:52.031754 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28306): Launched 13:51:52.148518 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:51:52.441290 run patchelf(pid=28307): Launched 13:51:52.632159 run osmo-stp_10.42.42.5(pid=28304): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28304)] 13:51:52.771342 run osmo-stp_10.42.42.5(pid=28304): stdout: | (launched: 2022-12-13_13:51:51.182808) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:51:52.911119 run osmo-stp_10.42.42.5(pid=28304): stderr: | �[0;m�[38;5;43m20221213135151373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135151373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135151373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135151374 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135151374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135151374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135151375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:51:53.046119 run osmo-stp_10.42.42.5(pid=28304): stdout: | (launched: 2022-12-13_13:51:51.182808) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:51:53.180099 run osmo-stp_10.42.42.5(pid=28304): stderr: | �[0;m�[38;5;43m20221213135151373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135151373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135151373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135151374 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135151374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135151374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135151375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:51:53.336195 run patchelf(pid=28307): Terminating (SIGINT) 13:51:53.519308 run patchelf(pid=28307): Terminated: ok {rc=0} 13:51:53.552868 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28304): Process ended prematurely: osmo-stp_10.42.42.5(pid=28304) [trial-2390↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28304)] [trial-2390↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:51:53.563002 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 13:51:53.626698 run osmo-hlr_10.42.42.2(pid=28301): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28301)] 13:51:53.678009 run osmo-hlr_10.42.42.2(pid=28301): stdout: | (launched: 2022-12-13_13:51:50.174563) 13:51:53.730046 run osmo-hlr_10.42.42.2(pid=28301): stderr: | �[0;m�[1;31m20221213135150372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213135150372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213135150372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213135150372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213135150372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213135150372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213135150385 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213135150393 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213135150394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213135150394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:51:53.774884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28294): Terminating (SIGTERM) 13:51:53.817023 run iperf3-srv_10.42.42.10(pid=28295): Terminating (SIGTERM) 13:51:53.859232 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28296): Terminating (SIGTERM) 13:51:53.901392 run iperf3-srv_10.42.42.10(pid=28297): Terminating (SIGTERM) 13:51:53.943570 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28300): Terminating (SIGTERM) 13:51:53.985624 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28303): Terminating (SIGTERM) 13:51:54.027706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28306): Terminating (SIGTERM) 13:51:54.037603 --- ParallelTerminationStrategy: PID 28294 died... 13:51:54.093832 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28294): Terminated: ok {rc=0} 13:51:54.103930 --- ParallelTerminationStrategy: PID 28295 died... 13:51:54.159929 run iperf3-srv_10.42.42.10(pid=28295): Terminated {rc=256} 13:51:54.169962 --- ParallelTerminationStrategy: PID 28296 died... 13:51:54.225886 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28296): Terminated: ok {rc=0} 13:51:54.235880 --- ParallelTerminationStrategy: PID 28297 died... 13:51:54.291685 run iperf3-srv_10.42.42.10(pid=28297): Terminated {rc=256} 13:51:54.301804 --- ParallelTerminationStrategy: PID 28300 died... 13:51:54.357567 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28300): Terminated: ok {rc=0} 13:51:54.367532 --- ParallelTerminationStrategy: PID 28303 died... 13:51:54.423507 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28303): Terminated: ok {rc=0} 13:51:54.433950 --- ParallelTerminationStrategy: PID 28306 died... 13:51:54.489953 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28306): Terminated: ok {rc=0} 13:51:54.575977 bus /gobi_0: Setting Powered False 13:51:55.682719 bus /gobi_0: Setting Powered False 13:51:56.793708 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28304): Process ended prematurely: osmo-stp_10.42.42.5(pid=28304) [trial-2390↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28304)]