Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=3470): Process ended prematurely: osmo-stp_10.42.42.5(pid=3470) [trial-2391↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3470)]
Standard Output
---------------------------------------------- trial-2391 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 16:00:41.780528 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:00:41.791201 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 16:00:41.932258 tst cs_paging_gprs_active.py: using LAC 34694 16:00:42.058715 tst cs_paging_gprs_active.py: using RAC 14 16:00:42.185148 tst cs_paging_gprs_active.py: using CellId 34694 16:00:42.309865 tst cs_paging_gprs_active.py: using BVCI 34695 16:00:42.334113 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:00:42.344885 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:00:42.355463 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:00:42.366019 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:00:42.376651 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:00:42.387476 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:00:42.398196 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:00:42.408564 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 16:00:42.419225 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 16:00:42.539429 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 16:00:42.828580 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:00:42.960242 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:00:43.289042 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3460): Launched 16:00:43.565423 run iperf3-srv_10.42.42.10(pid=3461): Launched 16:00:43.758177 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:00:43.889648 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:00:44.221780 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3462): Launched 16:00:44.497393 run iperf3-srv_10.42.42.10(pid=3463): Launched 16:00:44.689866 tst cs_paging_gprs_active.py:38: start network... 16:00:44.820884 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:00:45.329843 run create_hlr_db(pid=3464): Launched 16:00:45.511979 bus /sierra_2: Setting Powered False 16:00:46.575510 run create_hlr_db(pid=3464): Terminated: ok {rc=0} 16:00:47.026844 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3466): Launched 16:00:47.346134 run osmo-hlr_10.42.42.2(pid=3467): Launched 16:00:47.467207 run osmo-stp_10.42.42.5: Starting osmo-stp 16:00:48.018773 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3469): Launched 16:00:48.336067 run osmo-stp_10.42.42.5(pid=3470): Launched 16:00:48.450258 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:00:49.003124 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3472): Launched 16:00:49.115097 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:00:49.394438 run patchelf(pid=3473): Launched 16:00:49.580584 run osmo-stp_10.42.42.5(pid=3470): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3470)] 16:00:49.715660 run osmo-stp_10.42.42.5(pid=3470): stdout: | (launched: 2022-12-13_16:00:48.179546) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:00:49.851180 run osmo-stp_10.42.42.5(pid=3470): stderr: | �[0;m�[38;5;43m20221213160048352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160048352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160048352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160048353 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160048353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160048354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160048354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:00:49.981661 run osmo-stp_10.42.42.5(pid=3470): stdout: | (launched: 2022-12-13_16:00:48.179546) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:00:50.110597 run osmo-stp_10.42.42.5(pid=3470): stderr: | �[0;m�[38;5;43m20221213160048352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160048352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160048352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160048353 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160048353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160048354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160048354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:00:50.262180 run patchelf(pid=3473): Terminating (SIGINT) 16:00:50.440294 run patchelf(pid=3473): Terminated: ok {rc=0} 16:00:50.473257 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3470): Process ended prematurely: osmo-stp_10.42.42.5(pid=3470) [trial-2391↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3470)] [trial-2391↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 16:00:50.483009 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 16:00:50.544065 run osmo-hlr_10.42.42.2(pid=3467): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3467)] 16:00:50.593751 run osmo-hlr_10.42.42.2(pid=3467): stdout: | (launched: 2022-12-13_16:00:47.189845) 16:00:50.643735 run osmo-hlr_10.42.42.2(pid=3467): stderr: | �[0;m�[1;31m20221213160047371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213160047371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213160047371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213160047371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213160047371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213160047371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213160047383 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213160047391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213160047391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213160047391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:00:50.686761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3460): Terminating (SIGTERM) 16:00:50.727278 run iperf3-srv_10.42.42.10(pid=3461): Terminating (SIGTERM) 16:00:50.767997 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3462): Terminating (SIGTERM) 16:00:50.808473 run iperf3-srv_10.42.42.10(pid=3463): Terminating (SIGTERM) 16:00:50.849136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3466): Terminating (SIGTERM) 16:00:50.890107 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3469): Terminating (SIGTERM) 16:00:50.930422 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3472): Terminating (SIGTERM) 16:00:50.939687 --- ParallelTerminationStrategy: PID 3460 died... 16:00:50.993853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3460): Terminated: ok {rc=0} 16:00:51.003576 --- ParallelTerminationStrategy: PID 3461 died... 16:00:51.057222 run iperf3-srv_10.42.42.10(pid=3461): Terminated {rc=256} 16:00:51.066866 --- ParallelTerminationStrategy: PID 3462 died... 16:00:51.120391 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3462): Terminated: ok {rc=0} 16:00:51.130125 --- ParallelTerminationStrategy: PID 3463 died... 16:00:51.183606 run iperf3-srv_10.42.42.10(pid=3463): Terminated {rc=256} 16:00:51.193202 --- ParallelTerminationStrategy: PID 3466 died... 16:00:51.246947 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3466): Terminated: ok {rc=0} 16:00:51.256640 --- ParallelTerminationStrategy: PID 3469 died... 16:00:51.310227 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3469): Terminated: ok {rc=0} 16:00:51.319918 --- ParallelTerminationStrategy: PID 3472 died... 16:00:51.373420 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3472): Terminated: ok {rc=0} 16:00:51.462622 bus /gobi_0: Setting Powered False 16:00:52.567446 bus /gobi_0: Setting Powered False 16:00:53.675022 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3470): Process ended prematurely: osmo-stp_10.42.42.5(pid=3470) [trial-2391↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3470)]