Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20429): Process ended prematurely: osmo-stp_10.42.42.5(pid=20429) [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20429)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:43:23.485796 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:43:23.496989 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:43:23.655814 tst cs_paging_gprs_active.py: using LAC 31068 19:43:23.774685 tst cs_paging_gprs_active.py: using RAC 213 19:43:23.892612 tst cs_paging_gprs_active.py: using CellId 31068 19:43:24.013630 tst cs_paging_gprs_active.py: using BVCI 31069 19:43:24.037183 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:43:24.048425 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:43:24.059629 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:43:24.070972 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:43:24.082287 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:43:24.093540 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:43:24.104900 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:43:24.116207 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:43:24.127645 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:43:24.249373 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:43:24.548771 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:43:24.686467 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:43:25.028349 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20419): Launched 19:43:25.311630 run iperf3-srv_10.42.42.10(pid=20420): Launched 19:43:25.513024 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:43:25.650373 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:43:25.992161 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20421): Launched 19:43:26.275304 run iperf3-srv_10.42.42.10(pid=20422): Launched 19:43:26.477170 tst cs_paging_gprs_active.py:38: start network... 19:43:26.614371 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:43:27.132773 run create_hlr_db(pid=20423): Launched 19:43:27.322486 bus /gobi_6: Setting Powered False 19:43:28.344429 run create_hlr_db(pid=20423): Terminated: ok {rc=0} 19:43:28.758911 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20425): Launched 19:43:29.070386 run osmo-hlr_10.42.42.2(pid=20426): Launched 19:43:29.190224 run osmo-stp_10.42.42.5: Starting osmo-stp 19:43:29.728297 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20428): Launched 19:43:30.034930 run osmo-stp_10.42.42.5(pid=20429): Launched 19:43:30.145895 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:43:30.680334 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20431): Launched 19:43:30.789605 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:43:31.095075 run patchelf(pid=20432): Launched 19:43:31.294444 run osmo-stp_10.42.42.5(pid=20429): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20429)] 19:43:31.441131 run osmo-stp_10.42.42.5(pid=20429): stdout: | (launched: 2022-12-12_19:43:29.884186) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:43:31.587973 run osmo-stp_10.42.42.5(pid=20429): stderr: | �[0;m�[38;5;43m20221212194330052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212194330052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212194330053 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212194330053 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212194330054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212194330054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212194330054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:43:31.727491 run osmo-stp_10.42.42.5(pid=20429): stdout: | (launched: 2022-12-12_19:43:29.884186) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:43:31.867928 run osmo-stp_10.42.42.5(pid=20429): stderr: | �[0;m�[38;5;43m20221212194330052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212194330052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212194330053 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212194330053 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212194330054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212194330054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212194330054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:43:32.030064 run patchelf(pid=20432): Terminating (SIGINT) 19:43:32.218123 run patchelf(pid=20432): Terminated: ok {rc=0} 19:43:32.251966 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20429): Process ended prematurely: osmo-stp_10.42.42.5(pid=20429) [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20429)] [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:43:32.262110 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 19:43:32.327099 run osmo-hlr_10.42.42.2(pid=20426): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20426)] 19:43:32.379721 run osmo-hlr_10.42.42.2(pid=20426): stdout: | (launched: 2022-12-12_19:43:28.914141) 19:43:32.434723 run osmo-hlr_10.42.42.2(pid=20426): stderr: | �[0;m�[1;31m20221212194329091 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212194329091 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212194329092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212194329092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212194329092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212194329092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212194329102 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212194329111 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212194329111 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212194329111 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:43:32.477244 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20419): Terminating (SIGTERM) 19:43:32.517570 run iperf3-srv_10.42.42.10(pid=20420): Terminating (SIGTERM) 19:43:32.557905 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20421): Terminating (SIGTERM) 19:43:32.598146 run iperf3-srv_10.42.42.10(pid=20422): Terminating (SIGTERM) 19:43:32.638370 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20425): Terminating (SIGTERM) 19:43:32.678948 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20428): Terminating (SIGTERM) 19:43:32.719173 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20431): Terminating (SIGTERM) 19:43:32.728445 --- ParallelTerminationStrategy: PID 20419 died... 19:43:32.782708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20419): Terminated: ok {rc=0} 19:43:32.792376 --- ParallelTerminationStrategy: PID 20420 died... 19:43:32.845800 run iperf3-srv_10.42.42.10(pid=20420): Terminated {rc=256} 19:43:32.855794 --- ParallelTerminationStrategy: PID 20421 died... 19:43:32.909389 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20421): Terminated: ok {rc=0} 19:43:32.919422 --- ParallelTerminationStrategy: PID 20422 died... 19:43:32.972977 run iperf3-srv_10.42.42.10(pid=20422): Terminated {rc=256} 19:43:32.983023 --- ParallelTerminationStrategy: PID 20425 died... 19:43:33.037121 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20425): Terminated: ok {rc=0} 19:43:33.046895 --- ParallelTerminationStrategy: PID 20428 died... 19:43:33.101272 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20428): Terminated: ok {rc=0} 19:43:33.111461 --- ParallelTerminationStrategy: PID 20431 died... 19:43:33.166058 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20431): Terminated: ok {rc=0} 19:43:33.257071 bus /gobi_0: Setting Powered False 19:43:34.362808 bus /gobi_0: Setting Powered False 19:43:35.475224 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20429): Process ended prematurely: osmo-stp_10.42.42.5(pid=20429) [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20429)]