Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=26881): Process ended prematurely: osmo-stp_10.42.42.5(pid=26881) [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26881)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 13:35:21.489620 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:21.502509 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:35:21.668400 tst ping_idle_ping.py: using LAC 34294 13:35:21.797287 tst ping_idle_ping.py: using RAC 124 13:35:21.925291 tst ping_idle_ping.py: using CellId 34294 13:35:22.051508 tst ping_idle_ping.py: using BVCI 34295 13:35:22.076729 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:22.088876 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:22.100588 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:22.112052 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:22.123727 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:22.135667 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:22.147459 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:22.159361 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:35:22.455211 tst ping_idle_ping.py:24: start network... 13:35:22.589739 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:35:23.107025 run create_hlr_db(pid=26875): Launched 13:35:23.295255 bus /gobi_6: Setting Powered False 13:35:24.315422 run create_hlr_db(pid=26875): Terminated: ok {rc=0} 13:35:24.747076 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26877): Launched 13:35:25.070700 run osmo-hlr_10.42.42.2(pid=26878): Launched 13:35:25.192435 run osmo-stp_10.42.42.5: Starting osmo-stp 13:35:25.759504 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26880): Launched 13:35:26.082029 run osmo-stp_10.42.42.5(pid=26881): Launched 13:35:26.199568 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:35:26.760010 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26883): Launched 13:35:26.874834 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:35:27.155601 run patchelf(pid=26884): Launched 13:35:27.344493 run osmo-stp_10.42.42.5(pid=26881): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26881)] 13:35:27.482793 run osmo-stp_10.42.42.5(pid=26881): stdout: | (launched: 2022-12-13_13:35:25.922956) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:35:27.621540 run osmo-stp_10.42.42.5(pid=26881): stderr: | �[0;m�[38;5;43m20221213133526111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213133526111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213133526111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213133526112 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213133526112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213133526112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213133526112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:35:27.754887 run osmo-stp_10.42.42.5(pid=26881): stdout: | (launched: 2022-12-13_13:35:25.922956) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:35:27.886936 run osmo-stp_10.42.42.5(pid=26881): stderr: | �[0;m�[38;5;43m20221213133526111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213133526111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213133526111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213133526112 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213133526112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213133526112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213133526112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:35:28.041434 run patchelf(pid=26884): Terminating (SIGINT) 13:35:28.223052 run patchelf(pid=26884): Terminated: ok {rc=0} 13:35:28.255988 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26881): Process ended prematurely: osmo-stp_10.42.42.5(pid=26881) [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26881)] [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 13:35:28.265416 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 13:35:28.328642 run osmo-hlr_10.42.42.2(pid=26878): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26878)] 13:35:28.380419 run osmo-hlr_10.42.42.2(pid=26878): stdout: | (launched: 2022-12-13_13:35:24.911172) 13:35:28.432782 run osmo-hlr_10.42.42.2(pid=26878): stderr: | �[0;m�[1;31m20221213133525106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213133525106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213133525106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213133525106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213133525106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213133525106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213133525118 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213133525127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213133525127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213133525127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:35:28.477701 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26877): Terminating (SIGTERM) 13:35:28.520803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26880): Terminating (SIGTERM) 13:35:28.563407 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26883): Terminating (SIGTERM) 13:35:28.573225 --- ParallelTerminationStrategy: PID 26877 died... 13:35:28.630012 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26877): Terminated: ok {rc=0} 13:35:28.640173 --- ParallelTerminationStrategy: PID 26880 died... 13:35:28.696060 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26880): Terminated: ok {rc=0} 13:35:28.706033 --- ParallelTerminationStrategy: PID 26883 died... 13:35:28.761770 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26883): Terminated: ok {rc=0} 13:35:28.846955 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26881): Process ended prematurely: osmo-stp_10.42.42.5(pid=26881) [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26881)]