#
# DAHDI configuration
#

menuconfig DAHDI
	tristate "DAHDI support"
	select CRC_CCITT
	default m
	---help---
	  DAHDI basic infrastructure.

	  To compile this driver as a module, choose M here: the
	  module will be called dahdi.

	  If unsure, say Y.

config DAHDI_ECHOCAN
       tristate "DADHI Echo Cancelers (software)"
       depends on DAHDI
       default DAHDI

config DAHDI_ECHOCAN_MG2
       tristate "DADHI MG2 Echo Canceler"
       depends on DAHDI_ECHOCAN
       default DAHDI_ECHOCAN
	---help---
	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_echocancel_mg2.

	  If unsure, say Y.

config DAHDI_ECHOCAN_KB1
       tristate "DADHI KB1 Echo Canceler"
       depends on DAHDI_ECHOCAN
       default DAHDI_ECHOCAN
	---help---
	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_echocancel_kb1.

	  If unsure, say Y.

config DAHDI_ECHOCAN_SEC
       tristate "DADHI SEC Echo Canceler"
       depends on DAHDI_ECHOCAN
       default DAHDI_ECHOCAN
	---help---
	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_echocancel_sec.

	  If unsure, say Y.

config DAHDI_ECHOCAN_SEC2
       tristate "DADHI SEC2 Echo Canceler"
       depends on DAHDI_ECHOCAN
       default DAHDI_ECHOCAN
	---help---
	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_echocancel_sec2.

	  If unsure, say Y.

config DAHDI_ECHOCAN_HPEC
       tristate "DADHI HPEC Echo Canceler"
       depends on DAHDI_ECHOCAN
       default DAHDI_ECHOCAN
	---help---
	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_echocancel_hpec.

	  If unsure, say Y.

config DAHDI_WCT4XXP
	tristate "Digium Wildcard dual- and quad-T1/E1/J1 Support"
	depends on DAHDI && PCI
	default DAHDI
	---help---
	  This driver provides support for the following Digium
	  Wildcard products:

  	  * TE205/206/207/210/211/212P (PCI/PCI-X)
	  * TE220 (PCI-E)
  	  * TE405/406/407/410/411/412P (PCI/PCI-X)
	  * TE420 (PCI-E)

	  To compile this driver as a module, choose M here: the
	  module will be called wct4xxp.

	  If unsure, say Y.

config DAHDI_TRANSCODE
	tristate "DAHDI transcoding support"
	depends on DAHDI
	default DAHDI
	---help---
	  DAHDI transcoding infrastructure.

	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_transcode.

	  If unsure, say Y.

config DAHDI_WCTC4XXP
	tristate "Digium Wildcard TC400B Support"
	depends on DAHDI_TRANSCODE && PCI
	default DAHDI
	---help---
	  This driver provides support for the Digium Wildcard TC400B.

	  To compile this driver as a module, choose M here: the
	  module will be called wctc4xxp.

	  If unsure, say Y.

config DAHDI_VOICEBUS
	tristate "VoiceBus(tm) Interface Library"
	depends on PCI
	default DAHDI
	---help---
	   This driver provides the common interface for telephony cards that
	   use the VoiceBus(tm) interface.  It also contains common supporting
	   libraries for the VPMADT032 hardware echo cancelation module that
	   is available for the VoiceBus cards.

	   To compile this driver as a module, choose M here: the module will
	   be called voicebus.

	   If unsure, say Y.

config DAHDI_WCTDM24XXP
	tristate "Digium Wildcard VoiceBus analog card Support"
	depends on DAHDI && DAHDI_VOICEBUS
	default DAHDI
	---help---
	  This driver provides support for the following Digium
	  Wildcard products:

  	  * TDM410P (PCI/PCI-X)
	  * AEX410 (PCI-E)
  	  * TDM800P (PCI/PCI-X)
	  * AEX800 (PCI-E)
	  * TDM2400P (PCI/PCI-X)
	  * AEX2400 (PCI-E)

	  To compile this driver as a module, choose M here: the
	  module will be called wctdm24xxp.

	  If unsure, say Y.

config DAHDI_WCTE12XP
	tristate "Digium Wildcard VoiceBus digital card Support"
	depends on DAHDI && DAHDI_VOICEBUS
	default DAHDI
	---help---
	  This driver provides support for the following Digium
	  Wildcard products:

  	  * TE120P (PCI/PCI-X)
	  * TE121 (PCI/PCI-X)
  	  * TE122 (PCI-E)

	  To compile this driver as a module, choose M here: the
	  module will be called wcte12xp.

	  If unsure, say Y.

config DAHDI_PCIRADIO
	tristate "PCI Radio Support"
	depends on DAHDI && PCI
	default DAHDI
	---help---
	  To compile this driver as a module, choose M here: the
	  module will be called pciradio.

	  If unsure, say Y.

config DAHDI_DUMMY
	tristate "Dummy (no hardware) Timing Support"
	depends on DAHDI
	default DAHDI
	---help---
	  This module provides timing support for applications that
	  use DAHDI conference mixing services, pseudo channels or
	  for other purposes.

	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_dummy.

	  If unsure, say Y.

config DAHDI_DYNAMIC
	tristate "Dynamic (virtual) Span Support"
	depends on DAHDI
	default DAHDI
	---help---
	  This module provides support for virtual spans, which are
	  emulated or provided using various technologies.

	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_dynamic.

	  If unsure, say Y.

config DAHDI_DYNAMIC_ETH
	tristate "Ethernet (TDMoE) Span Support"
	depends on DAHDI && DAHDI_DYNAMIC
	default DAHDI
	---help---
	  This module provides support for spans over Ethernet,
	  using the TDMoE protocol.

	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_dynamic_eth.

	  If unsure, say Y.

config DAHDI_DYNAMIC_ETHMF
	tristate "Ethernet (TDMoE) Multi-Frame Span Support"
	depends on DAHDI && DAHDI_DYNAMIC
	default DAHDI
	---help---
	  This module provides support for spans over Ethernet,
	  using the TDMoE-Multi-Frame protocol.

	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_dynamic_ethmf.

	  If unsure, say Y.

config DAHDI_DYNAMIC_LOC
	tristate "Local (loopback) Span Support"
	depends on DAHDI && DAHDI_DYNAMIC
	default DAHDI
	---help---
	  This module provides support for spans in the local system,
	  primarily used for looping and monitoring other spans.

	  To compile this driver as a module, choose M here: the
	  module will be called dahdi_dynamic_loc.

	  If unsure, say Y.


config DAHDI_WCTE11XP
	tristate "Digium Wildcard TE110P Support"
	depends on DAHDI && PCI
	default DAHDI
	---help---
	  To compile this driver as a module, choose M here: the
	  module will be called wcte11xp.

	  If unsure, say Y.

config DAHDI_ICE1USB
	tristate "Osmocom iceE1usb dual-E1 Support"
	depends on DAHDI && USB
	default DAHDI
	---help---
	  This driver provides support for the Osmocom icE1usb product.

	  To compile this driver as a module, choose M here: the
	  module will be called icE1usb.

	  If unsure, say Y.

config DAHDI_TRUNKDEV
	tristate "Virtual trunk device support"
	depends on DAHDI
	default DAHDI
	---help---
	  This driver provides support for spans via a virtual trunk device.
	  In this driver, DAHDI basically only acts as a compability layer to
	  multiplex and de-multiplex samples from the individual channels
	  (timeslots) to/from E1 frames, which are provided/consumed from a
	  new /dev/dahdi/trunkdev character device.  Actual interfacing with
	  real or physical hardware is then performed by some userspace process.

	  To compile this driver as a module, choose M here: the
	  module will be called dahdi-trunkdev.

	  If unsure, say Y.



source "drivers/dahdi/xpp/Kconfig"

config DAHDI_ZAPHFC
	tristate "HFC-S DAHDI Driver"
	depends on DAHDI && PCI
	default DAHDI
	---help---
	  This driver provides DAHDI support for various HFC-S single-port
          ISDN (BRI) cards.

	  To compile this driver as a module, choose M here: the
	  module will be called zaphfc.

	  If unsure, say Y.